Журналы →  Chernye Metally →  2023 →  №7

Chernye Metally



65 years of Steelmaking in Novotroitsk
Название Mastering the technology for production of high-strength cast iron with nodular graphite for manufacture of castings in the conditions of JSC Ural Steel
Авторы V. V. Lazeev, K. S. Skokov, D. V. Nizhelsky, L. G. Evsina, O. P. Pudovkina
Информация об авторах

JSC Ural Steel, Novotroitsk, Russia:
V. V. Lazeev, Chief Specialist of the Directorate for Innovations, e-mail: v.lazeev@uralsteel.com
K. S. Skokov, Chief Specialist on Casting and Electric Steelmaking Production
D. V. Nizhelsky, Head of New Products Department
L. G. Evsina, Chief Specialist in Metallurgy
O. P. Pudovkina, Engineer of the 1st Category

 

I. V. Kovalko and N. G. Karkhanina took part in the metallographic studies.

Steel Production
Название A new approach to the development of an efficient technology for production of steel with a low content of non-metallic inclusions
Автор S. A. Botnikov
Информация об авторе

South Ural State University (National Research Uviversity), Chelyabinsk, Russia:
S. A. Botnikov, Cand. Eng., Doctoral Cand., Dept. of Materials Science and Physical Chemistry of Materials, e-mail: sbotnikov@bk.ru

Название Improvement of oxidation resistance of arc furnace graphite electrodes
Авторы R. Yu. Feshchenko, O. O. Erokhina, I. O. Litavrin, S. V. Ryaboshuk
Информация об авторах

Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia:

R. Yu. Feshchenko, Cand. Eng., Associate Prof., Dept. of Metallurgy, e-mail: Feschenko_RYu@pers.spmi.ru
O. O. Erokhina, Postgraduate Student
I. O. Litavrin, Student

 

Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia:
S. V. Ryaboshuk, Senior Lecturer, Higher School of Physics and Technology of Materials

60 years of the Department of Materials Science and Design Principles of Vyatka State University
Название Formation of nitrided layers in iron under thermal cycling conditions
Авторы L. G. Petrova, I. S. Belashova, O. B. Lisovskaya, E. A. Marinin
Информация об авторах

Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia:

L. G. Petrova, Dr. Eng., Prof., Head of the Dept. of Technology of Structural Materials
I. S. Belashova, Dr. Eng., Prof., Dept. of Technology of Structural Materials

 

Vyatka State University, Kirov, Russia:
O. B. Lisovskaya, Cand. Eng., Associate Prof., Head of the Dept. of Materials Science and Basics of Design
E. A. Marinin, Cand. Eng., Associate Prof., Dept. of Information Technologies in Mechanical Engineering, e-mail: e.marrini@gmail.com

Название Quantitative evaluation of effectiveness of laser technologies for surface modification
Авторы I. S. Belashova, E. A. Marinin, V. A. Lisovsky
Информация об авторах

Moscow Automobile and Road Construction State Technical University, Moscow, Russia:

I. S. Belashova, Dr. Eng., Prof., Dept. of Technology of Structural Materials

 

Vyatka State University, Kirov, Russia:
E. A. Marinin, Cand. Eng., Associate Prof., Dept. of Information Technologies in Mechanical Engineering, e-mail: e.marrini@gmail.com
V. A. Lisovsky, Cand. Eng., Associate Prof., Dept. of Materials Science and Design Basics

Название Structure-dependent damping and mechanical properties of graphitized iron alloys
Автор A. I. Skvortsov
Информация об авторе

Vyatka State University, Kirov, Russia:

A. I. Skvortsov, Dr. Eng., Prof., Dept. of Materials Science and Design Fundamentals, e-mail: skvorcov@vyatsu.ru

Metal Forming
Название Assessment of contact-fatigue damage to rails at various degrees of wear
Автор V. Yu. Konyukhov
Информация об авторе

Irkutsk National Research Technical University, Irkutsk, Russia:

V. Yu. Konyukhov, Cand. Eng., Associate Prof., Dept. of Automation and Control, e-mail: konyukhov_vyu@mail.ru

Название Residual curvature of bimetallic sheet at elastoplastic bending
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS”, Moscow, Russia:

V. N. Shinkin, Dr. Phys.-Math., Prof., Dept. of Physics, e-mail: shinkin-korolev@yandex.ru

Coating and Corrosion Protection
Название Corrosion behavior of steel 08Yu in simulated service solution of heating systems
Авторы A. G. Rakoch, A. A. Lobach, E. P. Monakhova, M. V. Zhelezny, V. V. Begnarsky, O. V. Volkova
Информация об авторах

National University of Science and Technology MISIS, Moscow, Russia:

A. G. Rakoch, Dr. Chem., Prof., Dept. of Steel Metallurgy, New Production Technologies and Metal Protection, e-mail: rakoch@mail.ru

O. V. Volkova, Cand. Eng., Senior Lecturer, Dept. of Steel Metallurgy, New Production Technologies and Metal Protection

 

JSC RIFAR, Gay, Russia:
A. A. Lobach, Cand. Eng., Innovation Director

V. V. Begnarsky, Cand. Eng., Deputy Director for Scientific and Technical Development

 

Certification Center, Moscow, Russia:
E. P. Monakhova, Cand. Eng., Chief Specialist in Corrosion Protection, e-mail: evmo444@ya.ru

 

Baikov Institute of Metallurgy and Materials Science, RAS, Moscow, Russia:
M. V. Zhelezny, Junior Researcher

Mechanical Engineering Technologies
Название Features of the distribution of magnetic induction during magnetic-abrasive processing of synchronizers made of structural alloy steel
Авторы V. V. Maksarov, D. A. Klochkov
Информация об авторах

Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia:

V. V. Maksarov, Dr. Eng., Prof., Dean of the Faculty of Mechanical Engineering, e-mail: maks78.54@mail.ru
D. A. Klochkov, Postgraduate Student, Dept. of Mechanical Engineering, e-mail: dimaklochkov@bk.ru

History of Metallurgy
Название Pavel Petrovich Anosov – an outstanding scientist and statesman
Автор O. N. Bondareva
Информация об авторе

Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia:
O. N. Bondareva, Cand. Ped., Associate Prof., Dept. of Pedagogical Competences, e-mail: bondareva_on@pers.spmi.ru

Журналы →  Chernye Metally →  2023 →  №7