Chernye Metally
Ural Steel, Novotroitsk, Russia
E. A. Gribanov, Chief Engineer of Coke Production, e-mail: e.gribanov@uralsteel.com
A. Yu. Fuks, Chief Specialist in Sinter and Blast Furnace Production of the Technical Directorate, e-mail: ayf181073@mail.ru
Novotroitsk branch of the National University of Science and Technology MISiS, Novotroitsk, Russia
D. R. Ganin, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: dmrgan@mail.ru
Students M. A. Vishnevsky, E. B. Dosov, A. A. Kultasova, V. A. Prokopova, V. S. Shevtsov, A. Yu. Sherstobitova took part in the work.
South Ural State University, Chelyabinsk, Russia
G. P. Vyatkin, Dr. Chem., Prof., Advisor to the Rector’s Office, e-mail: viatkingp@susu.ru
N. A. Shaburova, Cand. Eng., Associate Prof., Dept. of Materials Science and Physical Chemistry of Materials, e-mail: shaburovana@susu.ru
South Ural State University, branch in Zlatoust, Zlatoust, Russia
A. N. Anikeev, Cand. Eng., Associate Prof., Dept. of Engineering and Materials Production Technology, e-mail: anikeevan@susu.ru
V. V. Sedukhin, Head of the Educational Laboratory of the Dept. of Engineering and Materials Production Technology, e-mail: sedukhinvv@susu.ru
Moscow Polytechnic University, Moscow, Russia
R. L. Shatalov, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: r.l.shatalov@mospolytech.ru
Moscow Polytechnic University, Moscow, Russia
S. A. Tipalin, Cand. Eng., Prof., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: tsa_mami@mail.ru
M. V. Bodnar, Master's Student, Dept. of Materials Forming and Additive Technologies
V. B. Belousov, Postgraduate Student, Dept. of Materials Forming and Additive Technologies
Moscow Polytechnic University, Moscow, Russia
M. A. Petrov, Cand. Eng., Associate Prof., Dept. of Materials Forming and Additive Technologies, e-mail: petrovma_mospolytech@mail.ru
E. V. Krutina, Cand. Eng., Associate Prof., Dept. of Materials Forming and Additive Technologies, e-mail: lenakrutina@mail.ru
Moscow Polytechnic University, Moscow, Russia
S. A. Tipalin, Cand. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: tsa_mami@mail.ru
Yu. G. Kalpin, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies
N. A. Kupriyanova, Graduate Student, Dept. of Materials Forming and Additive Technologies
Moscow Polytechnic University, Moscow, Russia
D. A. Gnevashev, Cand. Eng., Head of the Dept. of Materials Forming and Additive Technologies, e-mail: dengnevashev@mail.ru
Sh. F. Orudzhev, Master's Student, Dept. of Materials Forming and Additive Technologies, e-mail: shamil-orudzhev@rambler.ru
Moscow Polytechnic University, Moscow, Russia
R. L. Shatalov, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: mmomd@mail.ru
E. E. Zagoskin, Postgraduate Student, Dept. of Materials Forming and Additive Technologies, e-mail: zagoskin86@yandex.ru
Bogorodsky branch of JSC SPA Pribor, Noginsk, Russia
V. A. Medvedev, Cand. Eng., Technologist, e-mail: 10-bmt@mail.ru
Moscow Polytechnic University, Moscow, Russia
N. F. Shpunkin, Cand. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: snf48@yandex.ru
Moscow Polytechnic University, Moscow, Russia
Yu. K. Filippov, Dr. Eng., Prof ., Dept. of Materials Forming and Additive Technologies, e-mail: yulianf@mail.ru
D. A. Gnevashev, Cand. Eng., Head of the Dept. of Materials Forming and Additive Technologies, e-mail: dengnevashev@mail.ru
Le Chung Zung, Postgraduate Student, Dept. of Materials Forming and Additive Technologies
TMK Research Center, Chelyabinsk, Russia
B. V. Barichko, Cand. Eng., Leading Researcher, Laboratory of Drawing and Pressing, e-mail: barichko@rosniti.ru
N. V. Fokin, Deputy Head of the Laboratory of Drawing and Pressing
RusNITI, Chelyabinsk, Russia
Ya. I. Kosmatsky, Dr. Eng., Deputy General Director for Research
A. V. Zinchenko and T. N. Zharkaya, employees of TAGMET, took part in the study.
Wuhan Textile University, Wuhan, China1 ; Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia2 ; National University of Science and Technology “MISIS”, Moscow, Russia3
V. B. Deev*, Dr. Eng., Expert Prof., Faculty of Mechanical Engineering and Automation1, Chief Researcher2, Prof., Dept. of Metal Forming3, e-mail: deev.vb@mail.ru
Engineering Construction Maintenance Ltd., Achinsk, Russia1 ; Siberian Federal University, Krasnoyarsk, Russia2
S. L. Arapov, Chief Metallurgist1; Junior Researcher2, e-mail: arapovsl@yandex.ru
Siberian Federal University, Krasnoyarsk, Russia
A. A. Kosovich, Cand. Eng., Associate Prof., Dept. of Foundry, Senior Researcher, e-mail: akosovich@sfu-kras.ru
E. M. Lesiv, Cand. Eng., Associate Prof., Dept. of Foundry, e-mail: elesiv@sfu-kras.ru
*Correspondence author
Thixomet Ltd., St. Petersburg, Russia
A. A. Kazakov, Dr. Eng., Prof., Head of the Laboratory of Metallurgical Expertise, e-mail: kazakov@thixomet.ru
D. V. Kiselev, Technical Director
Vyksa Metallurgical Plant, Vyksa, Russia
E. S. Mursenkov, Chief Specialist of the Engineering and Technology Center
V. A. Murysev, Chief Specialist of the Engineering and Technology Center
Tolyatti State University, Tolyatti, Russia
D. A. Boldyrev, Dr. Eng., Prof., Dept. of Nanotechnology, Materials Science and Mechanics, e-mail: denis.boldyrev@vaz.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
A. A. Nikolaev, Cand. Eng., Head of the Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia1 ; Novotroitsk branch of NUST MISIS, Novotroitsk, Russia2
M. V. Kharchenko, Cand. Eng., Associate Prof., Dept. of Mechanics1, Associate Prof., Dept. of Metallurgical Technologies and Equipment2, e-mail: kharchenko.mv@bk.ru
S. P. Nefediev, Cand. Eng., Senior Researcher of the Scientific Innovation Sector1, Associate Prof., Dept. of Metallurgical Technologies and Equipment2, e-mail: sergeynefedyeff@gmail.com
Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia
E. I. Pryakhin, Dr. Eng., Prof., Head of the Dept. of Materials Science and Technology of Art Products, e-mail: e.p.mazernbc@yandex.ru
D. A. Pribytkova, Postgraduate Student, Dept. of Materials Science and Technology of Art Products, e-mail: pribytda@gmail.com