Chernye Metally

Ironmaking
ArticleName	Increasing the efficiency of the blast furnace production of Ural Steel by reducing the content of the +80 mm fraction in metallurgical coke
ArticleAuthors	E. A. Gribanov, D. R. Ganin, A. Yu. Fuks
ArticleAuthorsData	Ural Steel, Novotroitsk, Russia E. A. Gribanov, Chief Engineer of Coke Production, e-mail: e.gribanov@uralsteel.com A. Yu. Fuks, Chief Specialist in Sinter and Blast Furnace Production of the Technical Directorate, e-mail: ayf181073@mail.ru Novotroitsk branch of the National University of Science and Technology MISiS, Novotroitsk, Russia D. R. Ganin, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: dmrgan@mail.ru Students M. A. Vishnevsky, E. B. Dosov, A. A. Kultasova, V. A. Prokopova, V. S. Shevtsov, A. Yu. Sherstobitova took part in the work.
Steel Making
ArticleName	Identification of the intermetallic sigma phase in superduplex steels using metallographic analysis methods
ArticleAuthors	G. P. Vyatkin, A. N. Anikeev, N. A. Shaburova, V. V. Sedukhin
ArticleAuthorsData	South Ural State University, Chelyabinsk, Russia G. P. Vyatkin, Dr. Chem., Prof., Advisor to the Rector’s Office, e-mail: viatkingp@susu.ru N. A. Shaburova, Cand. Eng., Associate Prof., Dept. of Materials Science and Physical Chemistry of Materials, e-mail: shaburovana@susu.ru South Ural State University, branch in Zlatoust, Zlatoust, Russia A. N. Anikeev, Cand. Eng., Associate Prof., Dept. of Engineering and Materials Production Technology, e-mail: anikeevan@susu.ru V. V. Sedukhin, Head of the Educational Laboratory of the Dept. of Engineering and Materials Production Technology, e-mail: sedukhinvv@susu.ru
80th anniversary of the dept. “Materials Processing and Additive Technologies” of Moscow Polytechnic University
ArticleName	Development of the theory of calculating the force indicators of rolling along the length of thin bands and strips
ArticleAuthor	R. L. Shatalov
ArticleAuthorData	Moscow Polytechnic University, Moscow, Russia R. L. Shatalov, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: r.l.shatalov@mospolytech.ru
ArticleName	Changes in flange thickness when drawing sheet blanks
ArticleAuthors	S. A. Tipalin, M. V. Bodnar, V. B. Belousov
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia S. A. Tipalin, Cand. Eng., Prof., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: tsa_mami@mail.ru M. V. Bodnar, Master's Student, Dept. of Materials Forming and Additive Technologies V. B. Belousov, Postgraduate Student, Dept. of Materials Forming and Additive Technologies
ArticleName	Numerical study of the process of bending small diameter stainless steel pipes
ArticleAuthors	M. A. Petrov, E. V. Krutina
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia M. A. Petrov, Cand. Eng., Associate Prof., Dept. of Materials Forming and Additive Technologies, e-mail: petrovma_mospolytech@mail.ru E. V. Krutina, Cand. Eng., Associate Prof., Dept. of Materials Forming and Additive Technologies, e-mail: lenakrutina@mail.ru
ArticleName	Features of calculating power parameters for straightening bimetallic sheet blanks
ArticleAuthors	S. A. Tipalin, Yu. G. Kalpin, N. A. Kupriyanova
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia S. A. Tipalin, Cand. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: tsa_mami@mail.ru Yu. G. Kalpin, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies N. A. Kupriyanova, Graduate Student, Dept. of Materials Forming and Additive Technologies
ArticleName	Study of the process of bending long sheet products with selection of pressure dies based on computer modeling
ArticleAuthors	D. A. Gnevashev, Sh. F. Orudzhev
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia D. A. Gnevashev, Cand. Eng., Head of the Dept. of Materials Forming and Additive Technologies, e-mail: dengnevashev@mail.ru Sh. F. Orudzhev, Master's Student, Dept. of Materials Forming and Additive Technologies, e-mail: shamil-orudzhev@rambler.ru
ArticleName	Development and study of temperature treatment conditions that ensure the specified dimensions and properties of steel vessels on a rolling-press line
ArticleAuthors	R. L. Shatalov, E. E. Zagoskin, V. A. Medvedev
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia R. L. Shatalov, Dr. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: mmomd@mail.ru E. E. Zagoskin, Postgraduate Student, Dept. of Materials Forming and Additive Technologies, e-mail: zagoskin86@yandex.ru Bogorodsky branch of JSC SPA Pribor, Noginsk, Russia V. A. Medvedev, Cand. Eng., Technologist, e-mail: 10-bmt@mail.ru
ArticleName	Technological capabilities of the MTL-10G-1 testing machine
ArticleAuthor	N. F. Shpunkin
ArticleAuthorData	Moscow Polytechnic University, Moscow, Russia N. F. Shpunkin, Cand. Eng., Prof., Dept. of Materials Forming and Additive Technologies, e-mail: snf48@yandex.ru
ArticleName	Features of constructing a hardening curve when testing samples for uniaxial compression depending on the deformation value
ArticleAuthors	Yu. k. Filippov, D. A. Gnevashev, Le Chung Zung
ArticleAuthorsData	Moscow Polytechnic University, Moscow, Russia Yu. K. Filippov, Dr. Eng., Prof ., Dept. of Materials Forming and Additive Technologies, e-mail: yulianf@mail.ru D. A. Gnevashev, Cand. Eng., Head of the Dept. of Materials Forming and Additive Technologies, e-mail: dengnevashev@mail.ru Le Chung Zung, Postgraduate Student, Dept. of Materials Forming and Additive Technologies
Production of Pipes
ArticleName	Improvement of quality of OCTG upsetting
ArticleAuthors	B. V. Barichko, Ya. I. Kosmatsky, N. V. Fokin
ArticleAuthorsData	TMK Research Center, Chelyabinsk, Russia B. V. Barichko, Cand. Eng., Leading Researcher, Laboratory of Drawing and Pressing, e-mail: barichko@rosniti.ru N. V. Fokin, Deputy Head of the Laboratory of Drawing and Pressing RusNITI, Chelyabinsk, Russia Ya. I. Kosmatsky, Dr. Eng., Deputy General Director for Research A. V. Zinchenko and T. N. Zharkaya, employees of TAGMET, took part in the study.
Heating and Heat treatment
ArticleName	Determination of rational heat treatment modes for new high-manganese austenitic steel using thermodynamic modeling
ArticleAuthors	V. B. Deev, S. L. Arapov, A. A. Kosovich, E. M. Lesiv
ArticleAuthorsData	Wuhan Textile University, Wuhan, China¹ ; Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia² ; National University of Science and Technology “MISIS”, Moscow, Russia³ V. B. Deev, Dr. Eng., Expert Prof., Faculty of Mechanical Engineering and Automation¹, Chief Researcher², Prof., Dept. of Metal Forming³, e-mail: deev.vb@mail.ru* Engineering Construction Maintenance Ltd., Achinsk, Russia¹ ; Siberian Federal University, Krasnoyarsk, Russia² S. L. Arapov, Chief Metallurgist¹; Junior Researcher², e-mail: arapovsl@yandex.ru Siberian Federal University, Krasnoyarsk, Russia A. A. Kosovich, Cand. Eng., Associate Prof., Dept. of Foundry, Senior Researcher, e-mail: akosovich@sfu-kras.ru E. M. Lesiv, Cand. Eng., Associate Prof., Dept. of Foundry, e-mail: elesiv@sfu-kras.ru *Correspondence author
Metal science and Metal physics
ArticleName	Phase equilibrium diagrams for the nature of non-metallic inclusions in low-carbon steels modified with calcium and cerium
ArticleAuthors	A. A. Kazakov, E. S. Mursenkov, V. A. Murysev, D. V. Kiselev
ArticleAuthorsData	Thixomet Ltd., St. Petersburg, Russia A. A. Kazakov, Dr. Eng., Prof., Head of the Laboratory of Metallurgical Expertise, e-mail: kazakov@thixomet.ru D. V. Kiselev, Technical Director Vyksa Metallurgical Plant, Vyksa, Russia E. S. Mursenkov, Chief Specialist of the Engineering and Technology Center V. A. Murysev, Chief Specialist of the Engineering and Technology Center
ArticleName	Influence of microalloying additives of carbide-forming elements and sulfur on the complex of properties of cast iron brake disc blanks
ArticleAuthors	D. A. Boldyrev, A. A. Nikolaev, M. V. Kharchenko, S. P. Nefedev
ArticleAuthorsData	Tolyatti State University, Tolyatti, Russia D. A. Boldyrev, Dr. Eng., Prof., Dept. of Nanotechnology, Materials Science and Mechanics, e-mail: denis.boldyrev@vaz.ru Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia A. A. Nikolaev, Cand. Eng., Head of the Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia¹ ; Novotroitsk branch of NUST MISIS, Novotroitsk, Russia² M. V. Kharchenko, Cand. Eng., Associate Prof., Dept. of Mechanics¹, Associate Prof., Dept. of Metallurgical Technologies and Equipment², e-mail: kharchenko.mv@bk.ru S. P. Nefediev, Cand. Eng., Senior Researcher of the Scientific Innovation Sector¹, Associate Prof., Dept. of Metallurgical Technologies and Equipment², e-mail: sergeynefedyeff@gmail.com
Coating application and Corrosion protection
ArticleName	The influence of the quality of surface preparation of pipes for heating networks on their corrosion resistance during operation in underground conditions
ArticleAuthors	E. I. Pryakhin, D. A. Pribytkova
ArticleAuthorsData	Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia E. I. Pryakhin, Dr. Eng., Prof., Head of the Dept. of Materials Science and Technology of Art Products, e-mail: e.p.mazernbc@yandex.ru D. A. Pribytkova, Postgraduate Student, Dept. of Materials Science and Technology of Art Products, e-mail: pribytda@gmail.com

Journals → Chernye Metally → 2023 → #11

Journals

CIS Iron and Steel Review

MPT International

Museums