CIS Iron and Steel Review
Preparation of Raw Materials | |
ArticleName | Analysis of the technique for experimental determination of the efficient heat transfer coefficient during drying of iron ore pellets and charge in the dense layer |
ArticleAuthors | V. I. Bobkov, M. I. Dli, V. A. Orekhov, N. S. Kulyasov |
ArticleAuthorsData | Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia) V. I. Bobkov, Dr. Eng., Associate Prof., Head of the Dept. of Higher Mathematics, e-mail: vovabobkoff@mail.ru
Plekhanov Russian University of Economics (Moscow, Russia) |
Ferroalloys | |
ArticleName | On the problem of processing of manganese wastes from ore beneficiation: preparation of a single-component charge for ferromanganese melting |
ArticleAuthors | N. K. Dosmukhamedov, E. E. Zholdasbay, E. B. Tazhiev, A. A. Argyn |
ArticleAuthorsData | Satbaev University (Almaty, Kazakhstan) N. K. Dosmukhamedov, Cand. Eng., Prof., e-mail: nurdos@bk.ru |
ArticleName | Smelting of high-carbon ferrochromium from pre-reduced chromite raw materials |
ArticleAuthors | E. Zh. Shabanov, Zh. K. Saulebek, A. S. Akhmetov, G. K. Mukhtarkhanova |
ArticleAuthorsData | Zh. Abishev Chemical and Metallurgical Institute (Karaganda, Kazakhstan) E. Zh. Shabanov, PhD, Associate Professor, Leading Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: ye.shabanov@gmail.com
Research Center “INNTECH” LLP (Karaganda, Kazakhstan) |
Refractories | |
ArticleName | Mechanism of MgO–C refractories corrosion interacting with CaO–MgO–Al2O3–SiO2–FeO slags |
ArticleAuthors | I. A. Krasnyanskaya, K. N. Anisimov, M. P. Gusev, M. G. Moshchenko, D. V. Karavaev |
ArticleAuthorsData | I. P. Bardin Central Research Institute of Ferrous Metallurgy (Moscow, Russia) I. A. Krasnyanskaya*, Cand. Eng., Head of the Laboratory of Complex Chemical Researches, N. P. Lyakishev Scientific Center for Complex Processing of Raw Materials, iakrsn@gmail.com
LLC “Cyberphysics” (Moscow, Russia)
PAO NLMK (Lipetsk, Russia)
|
Casting | |
ArticleName | Increase of resistance of steel moulds using the complex modifier INSTEEL-7 |
ArticleAuthors | V. A. Korovin, I. O. Leushin, I. P. Balabanov, I. A. Savin |
ArticleAuthorsData | Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia) V. A. Korovin, Dr. Eng., Prof., Dept. “Metallurgical Technologies and Equipment”, e-mail: v.korovin2015@yandex.ru Kazan National Research Technical University named after A.N. Tupolev – KAI (Kazan, Russia)1 ; Kazan Federal University (Kazan, Russia)2 I. P. Balabanov, Cand. Eng., Associate Prof., Dept. “Automation and Management”; Associate Prof., Dept. “Design
Kazan National Research Technical University named after A.N. Tupolev – KAI (Kazan, Russia) |
Rolling | |
ArticleName | Review of scientific-applied research and industrial application of radial shear rolling technology |
ArticleAuthors | S. P. Galkin, T. Yu. Kin, Yu. V. Gamin, A. S. Aleshchenko, B. V. Karpov |
ArticleAuthorsData | National University of Science and Technology «MISIS» (Moscow, Russia)1 ; JSC “Istok ML” (Moscow, Russia)2 S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming1,2, e-mail: glk-omd@yandex.ru Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming1,2, e-mail: y.gamin@mail.ru A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of Dept. of Metal Forming1,2, e-mail: judger85@mail.ru
National University of Science and Technology «MISIS» (Moscow, Russia)
Research and Development Center “OMD” (Moscow, Russia) |
ArticleName | Evaluation of steel grade effects on stress-strain behavior of joint connectors: a finite element approach |
ArticleAuthors | M. V. Lukin, A. A. Strekalkin, V. B. Deev, S. I. Roshchina |
ArticleAuthorsData | Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia) M. V. Lukin, Cand. Eng., Associate Prof., e-mail: lukin_mihail_22@mail.ru S. I. Roshchina, Dr. Eng., Prof., Head of Building Structures Dept., e-mail: rsi3@mail.ru Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia)1 ; Wuhan Textile University (Wuhan, China)2 ; National University of Science and Technology “MISIS” (Moscow, Russia)3 |
Tubemaking | |
ArticleName | Detection of optimal parameters of steel sheet billet forming process while bending on PBT 25 three-roller machine |
ArticleAuthors | M. N. Skripalenko, G. P. Zhigulev, V. A. Fadeev, M. M. Skripalenko |
ArticleAuthorsData | National University of Science and Technology “MISIS” (Moscow, Russia) M. N. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: tfsmn@yandex.ru “DKN-T” JSC (Moscow, Russia) G. P. Zhigulev, Cand. Eng., Associate Prof., e-mail: aldebaran2000@mail.ru |
Heat Treatment and Metal Science | |
ArticleName | Using of thermal cycling to improve the strength properties of steel |
ArticleAuthors | V. B. Kuskov, E. S. Iliin |
ArticleAuthorsData | Empress Catherine II Saint Petersburg Mining University (Saint Petersburg, Russia) V. B. Kuskov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Kuskov_VB@pers.spmi.ru |
Metal Science and Metal Physics | |
ArticleName | Investigation and modelling of the microstructure evolution during hot deformation of novel Fe–30Mn–10Al–3Si–1C with an elevated specific strength |
ArticleAuthors | A. A. Kazakova, A. V. Pozdnyakov, V. V. Cheverikin, A. Yu. Churyumov |
ArticleAuthorsData | National University of Science and Technology “MISIS” (Moscow, Russia) A. A. Kazakova, Master Student, Dept. of Physical Metallurgy of Non-ferrous Metals |
ArticleName | Viscoplastic properties of chromium-nickel steel in short-term creep under constant stress. Part 1 |
ArticleAuthors | A. Yu. Kuzkin, D. A. Zadkov, V. Yu. Skeeba, V. V. Kukartsev, Ya. A. Tynchenko |
ArticleAuthorsData | Empress Catherine II Saint Petersburg Mining University (Saint Petersburg, Russia) A. Yu. Kuzkin*, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Kuzkin_AYu@pers.spmi.ru Novosibirsk State Technical University (Novosibirsk, Russia) V. Yu. Skeeba, Cand. Eng., Associate Prof., Dept. of Industrial Machinery Design, e-mail: skeeba_vadim@mail.ru Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)1 ; Siberian Federal University (Krasnoyarsk, Russia)2 ; Bauman Moscow State Technical University (Moscow, Russia)3 V. V. Kukartsev, Cand. Eng., Associate Prof., Dept. of Information Economic Systems, Institute of Engineering and Economics1, Dept. of Software Engineering, Institute of Space and Information Technologies2, Artificial Intelligence Technology Scientific and Education Center3, e-mail: vlad_saa_2000@mail.ru Siberian Federal University (Krasnoyarsk, Russia)1 ; Bauman Moscow State Technical University (Moscow, Russia)2 Ya. A. Tynchenko, Junior Researcher, Lab. of Biofuel Compositions1, Artificial Intelligence Technology Scientific and Education Center2, e-mail: t080801@yandex.ru
|
ArticleName | The method of quantitative assessment of galaxite dissociation degree in the oxide MnO–Al2O3 melt based on the Bjerrum-Guggenheim coefficient concept |
ArticleAuthors | G. S. Yerekeeva, G. I. Narikbaeva, I. Ya. Korsukova, F. R. Kapsalamova |
ArticleAuthorsData | Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan) G. S. Yerekeeva, Postgraduate Student, Junior Researcher, “Metallurgy of Steel and material Science” laboratory, e-mail: yerekeyeva.g@mail.ru
National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan (Almaty, Kazakhstan) |
ArticleName | Investigation of properties of laminar antiferromagnetic nanostructures |
ArticleAuthors | B. V. Malozyomov, V. S. Tynchenko, V. A. Kukartsev, K. A. Bashmur, T. A. Panfilova |
ArticleAuthorsData | Novosibirsk State Technical University (Novosibirsk, Russia) B. V. Malozyomov*, Cand. Eng., Associate Prof., e-mail: malozyomov@corp.nstu.ru Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)1 ; Siberian Federal University (Krasnoyarsk, Russia)2 ; Bauman Moscow State Technical University (Moscow, Russia)3 V. S. Tynchenko*, Cand. Eng., Associate Prof.1,2,3, e-mail: vadimond@mail.ru Siberian Federal University (Krasnoyarsk, Russia) V. A. Kukartsev, Cand. Eng., Associate Prof., Polytechnic Institute, e-mail: vkukarstev@sfu-kras.ru
*Corresponding author |
Additive Technologies | |
ArticleName | Porosity reduction in metal with hybrid wire and arc additive manufacturing technology (WAAM) |
ArticleAuthors | A. I. Karlina, V. V. Kondratyev, A. E. Balanovskiy, N. A. Astafyeva, E. A. Yamshchikova |
ArticleAuthorsData | Moscow State University of Civil Engineering (Moscow, Russia) A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru
A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia) V. V. Kondratyev, Cand. Eng., Senior Scientific Researcher
Irkutsk National Research Technical University (Irkutsk, Russia) |
Coating Application and Corrosion Protection | |
ArticleName | Identification and localization of pitting corrosion on metallic surface using deep learning |
ArticleAuthors | N. V. Krysko, N. A. Shchipakov, D. M. Kozlov, A. G. Kusyy |
ArticleAuthorsData | Bauman Moscow State Technical University (Moscow, Russia) N. V. Krysko, Cand. Eng., Associate Prof., Dept. MT-7 “Welding Tehnology and Diagnostics”, e-mail: kryskonv@bmstu.ru |
Laser Technologies | |
ArticleName | Experimental study of the process of laser treatment of steel Kh12M |
ArticleAuthors | N. A. Chichenev, S. M. Gorbatyuk, A. O. Karfidov, O. N. Chicheneva |
ArticleAuthorsData | National University of Science and Technology “MISIS” (Moscow, Russia) N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: chich38@mail.ru |
Machine-building Technologies | |
ArticleName | Calculation of the maximum functional clearance of a cylindrical joint between a steel shaft and a cast iron sprocket |
ArticleAuthors | O. A. Leonov, N. Zh. Shkaruba, Yu. G. Vergazova |
ArticleAuthorsData | Russian State Agrarian University – Moscow Timiryazev Agricultural Academy (Moscow, Russia) O. A. Leonov, Dr. Eng., Prof., e-mail: oaleonov@rgau-msha.ru |
Ecology and Recycling | |
ArticleName | Recycling of red mud in iron-containing catalyst for oxidizing organic impurities in waste water |
ArticleAuthors | T. V. Konkova, A. M. Gaydukova, E. Yu. Liberman, A. A. Seitkasymova |
ArticleAuthorsData | Mendeleev University of Chemical Technology (Moscow, Russia) T. V. Konkova, Dr. Eng., Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: kontat@list.ru |