Chernye Metally
Almalyk branch of Tashkent State Technical University named after Islam Karimov, Almalyk, Republic of Uzbekistan
Sh. T. Khojiev, РhD, Aacting Associate Prof., Dept. of Metallurgy, e-mail: hojiyevshohruh@yandex.ru
Tashkent State Technical University named after Islam Karimov, Tashkent, Republic of Republic of Uzbekistan
Kh. Sh. Sultonov, Assistant, Dept. of Metallurgy
N. A. Kadirov, Dr. Eng., Aacting Associate Prof., Dept. of Ecology and Environmental Protection
S. B. Gaibnazarov, PhD, Associate Prof., Dean, Faculty of Mining and Metallurgy
National University of Science and Technology MISIS, Moscow, Russia
E. V. Muratov, Postgraduate Student, Dept. of Steel Metallurgy, New Production Technologies and Metal Protection
S. V. Podkur, Postgraduate Student, Dept. of Steel Metallurgy, New Production Technologies and Metal Protection, e-mail: sergeypodkur@gmail.com
G. I. Kotelnikov, Cand. Eng., Associate Professor, Dept. of Steel Metallurgy, New Production Technologies and Metal Protection, e-mail: gikotelnikov@yandex.ru
Starooskolsky Technological Institute named after A. A. Ugarov (branch) of the National University of Science and Technology MISIS, Stary Oskol, Russia.
A. E. Semin, Dr. Eng., Prof., Dept. of Metallurgy and Metal Science named after S. P. Ugarova, e-mail: asemin2007@yandex.ru
Perm National Research Polytechnic University, Perm, Russia
A. N. Yurchenko, Cand. Eng., Senior Lecturer, Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: aleksmto@gmail.com
Yu. N. Simonov, Dr. Eng., Prof., Head of the Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: simonov@pstu.ru
M. Yu. Simonov, Cand. Eng., Director of the Joint Laboratory of Fundamental Research in Metal Science, e-mail: simonov@pstu.ru
Perm National Research Polytechnic University, Perm, Russia
S. K. Laptev, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: sklaptev@platinum-perm.ru
A. A. Shatsov, Dr. Eng., Prof., Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: shatsov@pstu.ru
L. V. Spivak, Dr. Phys.-Math., Prof., Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: lspivak2@mail.ru
S. K. Grebenkov, Cand. Eng., Leading Engineer, Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: drive@rtural.ru
Perm National Research Polytechnic University, Perm, Russia
O. V. Silina, Cand. Eng., Associate Prof., Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: silina-olga@mail.ru
T. S. Byvaltseva, Master, e-mail: byvaltseava@yandex.ru
Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus
M. N. Bosyakov, Cand. Phys.-Math., Associate Prof., e-mail: plasma.by.metal@gmail.com
JSC ELKAM-Neftemash, Perm, Russia
R. M. Polezhaev, Technical Director, e-mail: prm@elkam.ru
Perm National Research Polytechnic University, Perm, Russia
I. M. Russkikh, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: russkix-igor@mail.ru
Yu. N. Simonov, Dr. Eng., Prof., Head of the Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: simonov@pstu.ru
A. A. Shatsov, Dr. Eng., Prof., Dept. of Metal Science, Thermal and Laser Processing of Metals, e-mail: shatsov@pstu.ru
JSC ELKAM-Neftemash, Perm, Russia1 ; Perm National Research Polytechnic University, Perm, Russia2
S. N. Moltsen, Quality Director1, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Metal Processing2, e-mail: stanislav@vputehod.ru
A. V. Kravchenko, Head of Quality Control1, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Metal Processing2, e-mail: andrew@vputehod.ru
Perm National Research Polytechnic University, Perm, Russia
I. V. Shestakova, Student, Dept. of Metal Science, Thermal and Laser Metal Processing, e-mail: sestakovailona741@gmail.com
Yu. N. Simonov, Dr. Eng., Prof., Head of the Dept. of Metal Science, Thermal and Laser Metal Processing, e-mail: simonov@pstu.ru
Perm National Research Polytechnic University, Perm, Russia1 ; JSC ELKAM-Neftemash, Perm, Russia2
A. V. Kravchenko, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Metal Processing1, Head of Quality Control2, e-mail: andrew@vputehod.ru
S. N. Moltsen, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Metal Processing1, Quality Director2, e-mail: stanislav@vputehod.ru
Perm National Research Polytechnic University, Perm, Russia1 ; Metallprom, Perm, Russia2
D. A. Nikitin, Master, Dept. of Metal Science, Thermal and Laser Processing of Metals1, Quality Specialist2, e-mail: 89_87@bk.ru
Perm National Research Polytechnic University, Perm, Russia
T. V. Nekrasova, Cand. Eng., Associate Prof., Dept. of Metal Science, Thermal and Laser Processing of Metals
Perm National Research Polytechnic University, Perm, Russia1 ; JSC ELKAM-Neftemash, Perm, Russia2
I. Yu. Sokolov, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Processing of Metals1, General Director2, e-mail: aspirantsokolovivan@elkam.ru
S. N. Moltsen, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Processing of Metals1, Quality Director2, e-mail: stanislav@vputehod.ru
A. V. Kravchenko, Postgraduate Student, Dept. of Metal Science, Thermal and Laser Processing of Metals1, Head of Quality Control Department2, e-mail: andrew@vputehod.ru
Perm National Research Polytechnic University, Perm, Russia1 ; Metallprom, Perm, Russia2
D. A. Nikitin, Master1, Quality Specialist2, e-mail: 89_87@bk.ru
NRU Moscow State University of Civil Engineering, Moscow, Russia
Yu. I. Karlina, Cand. Eng., Researcher, e-mail: jul.karlina@gmail.com
Irkutsk National Research Technical University, Irkutsk, Russia
V. Yu. Konyukhov, Cand. Eng., Associate Prof., Dept. of Automation and Control, e-mail: konyukhov_vyu@mail.ru
T. A. Oparina, Postgraduate Student, Assistant, Dept. of Automation and Control, e-mail: martusina2@yandex.ru
National University of Science and Technology “MISIS”, Moscow, Russia
V. N. Shinkin, Dr. Phys.-Math., Prof., Dept. of Physics, e-mail: shinkin-korolev@yandex.ru
Siberian State Industrial University, Novokuznetsk, Russia
A. R. Fastykovsky, Dr. Eng., Associate Prof., Head of the Dept. of Metal Forming and Metal Science EVRAZ ZSMK, e-mail: fastikovsky@mail.ru
A. I. Musatova, Lecturer at the Extended Education Institution, e-mail: musatova-ai@yandex.ru
Tomsk Polytechnic University, Tomsk, Russia
N. V. Martyushev, Cand. Eng., Associate Prof., Dept. of Materials Science, e-mail: martjushev@tpu.ru
Moscow Polytechnic University, Moscow, Russia
R. V. Klyuev, Dr. Eng., Associate Prof., Prof., e-mail: kluev-roman@rambler.ru
Tula State University, Tula, Russia
G. V. Stas, Dr. Eng., Associate Prof., e-mail: galina_stas@mail.ru
University of Science and Technology MISIS, Moscow, Russia1 ; Yu. A. Izrael Institute of Global Climate and Ecology, Moscow, Russia2
O. V. Maksimova, Cand. Eng., Associate Prof.1, Leading Researcher2, e-mail: o-maximova@yandex.ru
University of Science and Technology MISIS, Moscow, Russia
V. A. Filichkina, Cand. Chem., Assocoate Prof., Head of the Dept. of Certification and Analytical
Control, e-mail: Filichkina.va@misis.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
Yu. V. Somova, Cand. Eng., Head of the Dept. of Industrial Ecology and Life Safety
Bryansk branch of the Plekhanov Russian University of Economics, Bryansk, Russia
V. A. Bobkov, Dr. Hist., Associate Prof., Dept. of Theory, History of State and Law and Humanities, e-mail: vladimir.bobkoff-2009@yandex.ru