Journals →  Chernye Metally →  2024 →  #11

Chernye Metally



80th anniversary of the Nizhny Tagil Institute of Technology — a branch of the Ural Federal University
ArticleName Use of ore-coal briquettes in the production of vanadium cast iron
ArticleAuthors M. V. Polovets, E. A. Sidorov, K. B. Pykhteeva, S. A. Zagaynov
ArticleAuthorsData

JSC EVRAZ Nizhny Tagil Iron and Steel Works, Nizhny Tagil, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia2

M. V. Polovets, Head of Bureau1, Postgraduate Student2, e-mail: Mikhail.Polovets@evraz.com

 

JSC EVRAZ Nizhny Tagil Iron and Steel Works, Nizhny Tagil, Russia.
E. A. Sidorov, Head of Laboratory, e-mail: Eugeny.Sidorov@evraz.com

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia

S. A. Zagaynov, Dr. Eng., Prof.2, e-mail: s.a.zagaynov@urfu.ru


Ural Federal University, Nizhny Tagil Institute of Technology (branch), Nizhny Tagil, Russia
K. B. Pykhteeva, Cand. Eng., Associate Prof., e-mail: k.b.pykhteeva@urfu.ru

ArticleName Effect of coke quality on iron smelting from vanadiumcontaining titanomagnetites
ArticleAuthors M. V. Polovets, S. I. Minin, A. A. Forshev, K. B. Pykhteeva, S. A. Zagaynov
ArticleAuthorsData

JSC EVRAZ Nizhny Tagil Iron and Steel Works, Nizhny Tagil, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia2

M. V. Polovets, Head of Bureau1, Postgraduate Student2, e-mail: Mikhail.Polovets@evraz.com

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia

S. I. Minin, Senior Lecturer, e-mail: s.i.minin@urfu.ru;

S. A. Zagaynov, Dr. Eng., Prof., e-mail: s.a.zagaynov@urfu.ru

 

JSC EVRAZ Nizhny Tagil Iron and Steel Works, Nizhny Tagil, Russia
A. A. Forshev, Deputy Head of Dept., Head of Division, e-mail: Andrey.Forshev@evraz.com

 

Ural Federal University, Nizhny Tagil Institute of Technology (branch), Nizhny Tagil, Russia.
K. B. Pykhteeva, Cand. Eng., Associate Prof., e-mail: k.b.pykhteeva@urfu.ru

ArticleName Study of the influence of vents arrangement in a core box on curing of molding mixture with heated air
ArticleAuthors A. P. Firstov, O. I. Shevchenko
ArticleAuthorsData

Ural Federal University, Nizhny Tagil Institute of Technology (branch), Nizhny Tagil, Russia

A. P. Firstov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: first55@mail.ru
O. I. Shevchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgical Technologies, e-mail: oleg.shevchenko@urfu.ru

ArticleName Comparative analysis of mill roll processing technologies
ArticleAuthor V. F. Pegashkin
ArticleAuthorData

Ural Federal University, Nizhny Tagil Institute of Technology (branch), Nizhny Tagil, Russia
V. F. Pegashkin, Dr. Eng., Prof., Head of the Dept. of General Engineering, e-mail: v.f.pegashkin@urfu.ru

ArticleName Formation of a functionally gradient structure of the surface layer in medium-carbon steels by plasma hardening
ArticleAuthors E. N. Safonov, M. V. Mironova, G. E. Trekin
ArticleAuthorsData

Ural Federal University, Nizhny Tagil Institute of Technology (branch), Nizhny Tagil. Russia

E. N. Safonov, Dr. Eng., Director of the School of Master’s Degree, Senior Researcher, e-mail: E.N.Safonov@urfu.ru
M. V. Mironova, Cand. Eng., Associate Prof., Deputy Director for Education and Science, e-mail: maria.mironova@urfu.ru
G. E. Trekin, Cand. Eng., Associate Prof., Laboratory Assistant-Researcher, e-mail: trekin1963@yandex.ru

105th anniversary of the Dept. of Metal Forming of the National University of Science and Technology MISIS
ArticleName Application of the NUST MISIS pilot industrial equipment complex for physical modeling of seamless pipe production technology
ArticleAuthors A. S. Aleshchenko, A. V. Muntin, Yu. V. Gamin, V. V. Yushchuk, D. A. Zlobin
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia
A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: aleschenko.as@misis.ru
Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: y.gamin@mail.ru
V. V. Yushchuk, Postgraduate Student, Laboratory of Hybrid Nanostructured Materials
D. A. Zlobin, Engineer, Dept. of Metal Forming

 

Viksa OMK, Vyksa, Russia

A. V. Muntin, Cand. Eng., Director of the Engineering and Technology Center, e-mail: muntin_av@omk.ru

ArticleName Investigation of lubricants for pipe rolling on a controlled moving mandrel on the DUO-210 mill
ArticleAuthors A. S. Aleshchenko, D. A. Chislov, V. V. Frolov, M. A. Kadach, A. V. Korol
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: aleschenko.as@misis.ru
D. A. Chislov, Postgraduate Student, Dept. of Metal Forming, e-mail: dan.chislov@yandex.ru
V. V. Frolov, Postgraduate Student, Dept. of Metal Forming, e-mail: vyachfrol0ff@yandex.ru
M. A. Kadach, Head of the Metal Forming Laboratory, e-mail: kadach.mv@misis.ru

 

Vyksa branch of NUST MISIS, Vyksa, Russia
A. V. Korol, Cand. Eng., Associate Prof., Dept. of Technology and Equipment for Metal Forming, e-mail: mail: korol_av@omk.ru

ArticleName Technology and stand for radial-shear rolling of special design for preliminary reduction of continuously cast billets in conditions of Tube Rolling Mill 160 of JSC Pervouralsk New Pipe Plant at increased roll feed angles
ArticleAuthors A. S. Aleshchenko, R. V. Iskhakov, S. P. Galkin, Yu. V. Gamin, M. V. Kadach
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: aleschenko.as@misis.ru
S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: glk-omd@yandex.ru
Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: y.gamin@mail.ru
M. V. Kadach, Head of Laboratory, e-mail: kadach.mv@misis.ru

 

National University of Science and Technology MISIS, Moscow, Russia1 ; JSC Pervouralsk New Pipe Plant, Pervouralsk, Russia2

R. V. Iskhakov, Postgraduate Student, Dept. of Metal Forming1, Leading Engineer-Technologist2, e-mail: ruslan.iskhakov@tmk-group.com

ArticleName Thermal field of a water-cooled plug during piercing and rolling of an extra-thick-walled hollow billet
ArticleAuthors N. M. Vavilkin, A. S. Budnikov, D. V. Bodrov, Mahmoud Alhaj Ali A.
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

N. M. Vavilkin, Dr. Eng., Prof., Dept. of Metal Forming
A. S. Budnikov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: budnikov.as@misis.ru
Mahmoud Alhaj Ali A., Postgraduate Student, Dept. of Metal Forming, e-mail: makhmud.a@misis.ru

FIT Ltd., Moscow, Russia

D. V. Bodrov, Cand. Eng., Head of Logistics and Customer Service, e-mail: dbodrov@fesco.com

Rolling and other Metal forming processes
ArticleName Ensuring the accuracy of cross-section geometric characteristics of rolled electrical steel sheets at NLMK
ArticleAuthors S. I. Mazur, V. A. Pimenov, D. A. Kovalev,N. N. Zhovnodiy, M. A. Dagman
ArticleAuthorsData

Novolipetsk Iron and Steel Works, Lipetsk, Russia
S. I. Mazur, Chief Investment Customer of the Office of the Managing Director
V. A. Pimenov, Cand. Eng., Head of Technological Projects, Directorate for Development of New Process Technologies, e-mail: pimenov_va@nlmk.com
D. A. Kovalev, Cand. Eng., Director, Directorate for Development of New Process Technologies
N. N. Zhovnodiy, Head of the Dynamo Steel Shop
M. A. Dagman, Senior Engineer, Directorate for Development of New Process Technologies, e-mail: dagman_ma@nlmk.com

ArticleName Assessing the impact of geometrical and geodetic parameters of equipment on technological conditions of cold rolling on a multi-stand mill
ArticleAuthors A. V. Morozov, S. I. Mazur, V. A. Pimenov
ArticleAuthorsData

Novolipetsk Iron and Steel Works, Lipetsk, Russia

A. V. Morozov, Director of the Rolling Production Directorate
S. I. Mazur, Chief Investment Customer of the Office of the Managing Director
V. A. Pimenov, Cand. Eng., Head of Technological Projects, Directorate for Development of New Process Technologies, e-mail: pimenov_va@nlmk.com

ArticleName Improving the mechanical characteristics of water supply and sewerage pipes in urban areas
ArticleAuthors O. S. Chibukhchyan, G. S. Chibukhchyan
ArticleAuthorsData

National Polytechnic University of Armenia, Yerevan, Republic of Armenia

O. S. Chibukhchyan, Cand. Eng., Head of Innovation Service, Acting Head of the Dept. of Mechanical Engineering and Automation Technology, e-mail: hovhannesch@gmail.com
G. S. Chibukhchyan, Cand. Eng., Associate Prof., Dept. of Transport Vehicles, e-mail: grigor.chibukhchyan@gmail.com

Heating and Heat Treatment
ArticleName Calculation of the temperature pressure in the soaking zone of a fuel furnace when heating cold ingots for forging
ArticleAuthors O. B. Kryuchkov, P. I. Malenko
ArticleAuthorsData

Volgograd State Technical University, Volgograd, Russia

O. B. Kryuchkov, Cand. Eng., Associate Prof., Dept. of Materials Technology, e-mail: bardb@mail.ru

 

Tula State University, Tula, Russia
P. I. Malenko, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering and Materials Science, e-mail: pawel.malenko@yandex.ru

Laser Hardening
ArticleName Description of the laser hardening of technological tools for metal forming
ArticleAuthors N. A. Chichenev, A. O. Karfidov, M. V. Vasilyev, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru
A. O. Karfidov, Head of the Dept. of Engineering of Technological Equipment, e-mail: a.korf@mail.ru
M. V. Vasilyev, Senior Lecturer, Dept. of Engineering of Technological Equipment, e-mail: michailvasiliev91@gmail.com
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Computer-Aided Design and Engineering, e-mail: ch-grafika@mail.ru

Powder Metallurgy
ArticleName Improving the performance properties of SCh20 cast iron by supersonic gas-dynamic spraying of RotoTec metal powder
ArticleAuthors E. S. Kozik, E. V. Svidenko
ArticleAuthorsData

MIREA — Russian Technological University, Moscow, Russia

E. S. Kozik, Cand. Eng., Associate Prof., Dept. of Material Science, e-mail: ele57670823@yandex.ru

 

Orenburg State University (OSU), Orenburg, Russia
E. V. Svidenko, Cand. Eng., Associate Prof., Dept. of Materials Science and Materials Technology, e-mail: tzvetkova.katia2016@yandex.ru

Machine-building Technologies
ArticleName Study of the quality of cutting of aviation materials steel 12Kh18N10T and titanium alloys VT-20, VT-6 after water jet cutting
ArticleAuthors Yu. I. Karlina, E. A. Guseva, M. V. Konstantinova, V. E. Gozbenko
ArticleAuthorsData

Moscow State University of Civil Engineering, Moscow, Russia
Yu. I. Karlina, Cand. Eng., Researcher, e-mail: jul.karlina@gmail.com


Irkutsk National Research Technical University, Irkutsk, Russia
E. A. Guseva, Cand. Eng., Associate Prof., Dept. of Materials Science, Welding and Additive Technologies, e-mail: el.guseva@rambler.ru
M. V. Konstantinova, Cand. Eng., Associate Prof., Dept. of Materials Science, Welding and Additive Technologies, e-mail: mavikonst@mail.ru

 

Angarsk State Technical University, Angarsk, Russia
V. E. Gozbenko, Dr. Eng., Prof., Dept. of Arrangement of Transportation and Automobile Transport Management, e-mail: vgozbenko@yandex.ru

Metallurgical History
ArticleName Metallurgical engineer V. S. Nitsenko and his contribution to the development of tank production at Plant No. 183 in Nizhny Tagil
ArticleAuthor Vas. V. Zapariy
ArticleAuthorData

Institute of History and Archaeology, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
Vas. V. Zapariy, Cand. Hist., Associate Prof., Senior researcher, e-mail: pantera.zap@gmail.com

Journals →  Chernye Metally →  2024 →  #11