Chernye Metally
The section "Development of metallurgy in Russia and CIS" is presented by collection of papers devoted to the 55th anniversary of Donbass State Technical university (Alchevsk, Ukraine). This collection includes general review of the university activity and successes as well 4 technical articles on developments in ironmaking, steelmaking and section rolling achieved by the specialists of this high school.
Continuous casting is the topic theme of this issue.
S. H. Scrubbe, P. Pennerstorfer, J. Watzinger and Guoxin Shan from Siemens VAI Technologies have examined development and results of operation of a 400 mm thick slab caster. This machine of bow type with straight mould has been designed for a thickness range of 250 to 400 mm and a width range of 1,600 to 2,400 mm. It gives the customer the possibility to produce slabs with optimum quality.
Another article in this section entitled "Improved casting properties through optimized submerged entry nozzle" is prepared by the specialists of SMS Siemag AG and RHI AG companies as well as China Steel Corp. The casting platform at the continuous slab caster No. 7 is displayed. Influence of surface flow in the mould on the slab quality is examined based on relation between mean paddle deflection and standard deviation, comparatively for current design and new design. Quantitative analysis of the mould level between standard and new submerged entry nozzles for slabs 250 x 1000-1250 mm and for average casting speed 1.40-1.71 m/min is done.
The third publication in this section by G. Paulon and C. Piemonte is devoted to a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni that was successfully started up in April 2009 with the first cast of AISI 304 grade in Terni plant, central Italy. The new caster is designed for a total capacity of approx. 900,000 t/a of stainless steel slabs covering the complete range of stainless grades, including AISI 300 and 400 families (austenitic, ferritic and martensitic grades).
The issue contains also the articles on rolling production, power engineering and ecology, economics and finances, education and training and metallurgical history.
More details about the issue you can find below or book printed or electronic version of the journal.
Donbass State Technical University (Alchevsk, Ukraine):
Antoshchenko N. I., Acting Rector, Professor, Doctor of Engineering Sciences, phone: +380 (6442) 2-31-23
Donbass State Technical University, Alchevsk, Ukraine:
Novokhatskiy A. M., Prof., Dr. Eng., Dean of Metallurgical Department, Chair of Ferrous Metals
Mikhailyuk G. D., Senior lecturer of the Chair of Automatic Control for Technological Processes
E-mail (common): info@dmmi.edu.ua
Donbass State Technical University, Alchevsk, Ukraine:
Kuberskiy S. V., Assist. Prof., Dr. Eng., Head of the Chair of Ferrous Metals, Skuberskiy@yandex.ru
Essellbach S. B., Assist. Prof., Dr. Eng., Chair of Ferrous Metals
Donbass State Technical University, Chair of Metal Processing and Metal Science, Alchevsk, Ukraine:
Lutskiy M. B., Assist. Prof., Dr. Eng., mblutsky@gmail.com
Chichkan A. A., Assist. Prof., Dr. Eng.
+Lutsenko V. A., Prof., Dr. Eng.
Donbass State Technical University, Chair of Metal Processing and Metal Science, Alchevsk, Ukraine:
Denishchenko P. N., Assist. Prof., Dr. Eng.
Goretskiy Yu. V., Senior Lecturer,
Lutskiy M. B., Assist. Prof., Dr. Eng., mllutsky@gmail.com
Siemens VAI Metals Technologies, Linz, Austria:
Skrube S. H., Grad. Eng.., Chief of Slab casting Department
Pennerstorfer P., Grad. Eng., Chief of Continuous Casting Technology Department
Watzinger J., Dr. Eng., Continuous Casting Technology Department
Guoxin Shan, Dr. Eng., Continuous Casting Technology Department
E-mail (common): casting.metals@siemens.com
SMS Siemag AG, Düsseldorf, Germany:
Wiens O., Dr., Department of Process Technology for Slab Continuous Casters, oliver.wiens@sms-siemag.com
Moβner W., Referent, Technical Services
Reifferscheid M., Dr. Eng., Head of Department of Casting R & D
Vogl N., Dr., Department of Flow Simulation
RHI AG, Vienna, Austria:
Hackl G., Department of Simulation, Research and Development
Nitzl G., Department of Marketing und Technology
RHI AG, Vienna, Austria China Steel Corporation, Kaohsiung, Taiwan:
Shung-Sheng Kao, Vice President Production Division
Hsin-Chin Kuo, Ass. General Superintendent
Danieli Wean United, Buttrio, Italy:
Paulon G., Executive Manager, Process Technology, g.paulon@danieli.it
Piemonte C., Executive Vice President
VDEh-Betriebsforschungsinstitut GmbH, Düsseldorf, Germany:
Sartor M., Dr. Eng., Head of Project, miriam.sartor@bfi.de
Orosz R., Dr. Eng., Head of Project
Reichardt T., Grad. Eng., Chief of Department of Coatings and Tribotechnics
Hoesch Hohenlimburg GmbH, Hagen, Germany:
Hänsch W., Dr. Eng., Chief of Department of Technological
ThyssenKrupp Companhia Siderûrgica do Atlântico (CSA), Santa Cruz, Rio de Janeiro, Brazil:
Menden G., Vice President Technology and Infrastructure, guenter.menden@thyssenkrupp.com
Lübeck University of Applied Sciences, Lübeck, Germany:
Bruce-Boye C., Prof., Dr.-Ing.