ArticleName |
Usage of product of limestone adsorption of sulphur dioxide as a nonsolvent in hydrometallurgical production technology of “Nadezhda” metallurgical plant |
ArticleAuthorData |
“Norilsk Nickel” MMC, Moscow, Russia
M. N. Naftal, Head of Department (Technical Department of Administration of Operational Production Control), phone: +7 (495) 786-83-75
Polar Division of “Norilsk Nickel” MMC, Norilsk, Russia T. P. Saverskaya, Chief Specialist (Center of Engineering Maintenance of Production) T. A. Makarova, Counselor of First Deputy Executive Officer — Chief Engineer (Department of Polar Division) A. F. Petrov, Head of Laboratory (Center of Engineering Maintenance of Production) A. I. Yurev, Executive Officer (Center of Engineering Maintenance of Production)
|
Abstract |
Nowadays, losses of precious metals with final tailings in hydrometallurgical production of “Nadezhda” Metallurgical Plant are 45–50%. Application of alternative nonsolvent reagent (calcium sulphite-bisulphite reagent) instead of metalized iron pellets during the sedimentation of non-ferrous metals is one of methods of this problem solving. As a result of exploratory researches, there was substantiated, that application of calcium reagent in operating technology is conductive to decreasing of losses of precious metals with final tailings. Sulphitebisulphite nonsolvent reagent was obtained by the processing of water lime suspension with gaseous mixture, containing 30–36% (gen.) of SO2. Operating of reagent was carried out with a temperature of 25–30 оC. The model gases, manufactured by mixing of air and sulphur dioxide from balloon, were used in experiments. Concentration of sulphur dioxide in air-gas mixture corresponded to its content in rich gases of flash smelting furnaces of “Nadezhda” Metallurgical Plant. Optimal content of solid reagent in manufacturing operation was 350–400 g/dm3, pH ~ 2.5. Pilot sample of calcium reagent was tested in operation of sedimentation of non-ferrous metals in laboratory scale. Interaction of sulphite- and bisulphite ions with finely dispersed elemental sulphur takes place during the realization of sedimentation process in high-temperature mode (125–130 оC). This sulphur is included in solid phase of pulp, oxidized as a result of leaching of pyrrhotine concentrate. At the same time, there are formed the unsaturated sulphur calcium compounds, which cause the sedimentation of non-ferrous metals from solution, in the form of sulphides. As a result of researches, there are defined the optimal conditions of operation of non-ferrous metals, sedimentation: temperature = 125–130 оC; reagent consumption = 100–110 kg/t of pyrrhotine concentrate; duration = 60 min. The required depth of sedimentation of nickel from solution at the level of 0.15–0.25 g/dm3 is reached in the foregoing conditions with final pH = 3.5. Researches of sulphur-sulphide flotation of pulp after sedimentation were carried out for the purpose of estimation of influence of calcium reagent on technological indices of following operations. Extraction of amount of platinum group metals into sulphur-sulphide concentrate in laboratory conditions is 80–83%, taking into account the optimal conditions of sulphursulphide flotation with 450 g/t of losses of solid butyl xanthate of calium and 100 g/t of losses of solid oil-organic compound DP-4 SM (ДП-4 СМ). |
References |
1. A. E. Makovetskiy. Sposob polucheniya sery iz kolchedana i tomu podobnykh serosoderzhashchikh materialov (Method of obtaining of sulphur from pyrites and similar sulphur-containing materials). Certificate of Authority USSR, No. 37699. Published : January 20, 1933. 2. A. E. Makovetskiy. Sposob vydeleniya medi i sery iz medistykh piritnykh rud (Method of release of copper and sulphur from cuprous pyrite ores). Certificate of Authority USSR, No. 50522. Published : July 13, 1935. 3. Sobol S. I., Frash T. M. Tsvetnye Metally — Non-ferrous metals. 1974. No. 2. pp. 14–21. 4. Kunda W., Rudyk B. Aqueous reduction of sulphur dioxide by pyrrhotite to elemental sulphur. Canadian Metallurgical Quarterly. 1970. Vоl. 9, No. 4. pp. 551–561. 5. Kunda W. Production de sulphure a partir d'un sulphure de fer et de l'angydride sulphureux. Patent Fr, No. 2089801, COId 17/00. Published : April 16, 1971. 6. Frash T. M. Issledovanie i razrabotka protsessa okislitelnogo vyshchelachivaniya pirrotinovykh kontsentratov sernistym angidridom : dissertatsiya ... kandidata tekhnicheskikh nauk (Research and development of process of oxidation leaching of pyrrhotine concentrates by sulphurous anhydride: Dissertation of ... Candidate of Engineering Sciences). Ministry of Non-ferrous Metallurgy of USSR, Gintsvetmet. Moscow, 1980. 218 p. 7. Sobol S. I., Timoshenko E. M. Tsvetnye Metally — Non-ferrous metals. 1992. No. 5. pp. 8–10. 8. Timoshenko E. M. Razrabotka usovershenstvovannoy tekhnologii avtoklavnoy pererabotki pirrotinovykh kontsentratov : dissertatsiya ... kandidata tekhnicheskikh nauk (Development of improved technology of autoclave processing of pyrrhotine concentrates : Dissertation ... of Candidate of Engineering Sciences). Ministry of Non-ferrous Metallurgy of USSR, Gintsvetmet. Moscow, 2001. 169 p. 9. Burkova I. I., Oruzheynikov A. I., Saverskaya T. P., Grigoreva L. G. Tsvetnye Metally — Non-ferrous metals. 1998. No. 10/11. pp. 57–61. 10. Naftal M. N., Vydysh A. V., Timoshenko E. M. et al. Tsvetnye Metally — Non-ferrous metals. 2007. No. 7. pp. 53–60. 11. Naftal M. N., Shur M. B., Vydysh A. V. et al. Tsvetnye Metally — Non-ferrous metals. 2007. No. 7. pp. 60–67. 12. Petrov A. F., Saverskaya T. P., Naftal M. N. et al. Tsvetnye Metally — Non-ferrous metals. 2008. No. 7. pp. 87–93. 13. Sadykov S. B. Avtoklavnaya pererabotka nizkosortnykh tsinkovykh kontsentratov (Autoclave processing of low-grade zinc concentrates). Ekaterinburg : Ural Branch of Russian Academy of Sciences, 2006. 581 p.
14. Kohl A., Nielsen R. Gas purification. Fifth edition. Houston, Texas : USA Gulf Publishing Company. 1395 p. 15. Ilyukhin I. V., Kozlov I. V., Kaytmazov N. G. et al. Tsvetnye Metally — Non-ferrous metals. 2007. No. 7. pp. 85–87. 16. Hakka L. E., Brown D. J. Recovery and recycling of SO2 in a sulfite pulp mill. “Sulphur 98” : Presented. Tucson, Arizona, November 1–4, 1998. 17. Makarova T. A., Makarov D. F., Naftal M. N. et al. Sposob prigotovleniya kaltsievogo sulfidizatora dlya osazhdeniya tyazhelykh tsvetnykh metallov (Method of manufacturing of calcium sulphidizer for sedimentation of heavy non-ferrous metals). Patent RF, No. 2120484. Published : October 13, 1997. 18. Kitay A. G., Volkov V. I., Roytberg S. I. et al. Energosberegayushchie tekhnologii v proizvodstve tyazhelykh tsvetnykh metallov (Energy-saving technologies in production of heavy non-ferrous metals). Sbornik nauchnykh trudov Gintsvetmeta (Collection of scientific proceedings of Gintsvetmet). Moscow, 1992. pp. 26–34. 19. Kitay A. G., Volkov V. I., Roytberg S. I. et al. Kombinirovannye malootkhodnye protsessy kompleksnoy pererabotki trudnoobogatimykh rud i produktov tyazhelykh tsvetnykh metallov (Combined lowwaste processes of complex processing of complex ores and products of heavy non-ferrous metals). Sbornik nauchnykh trudov Gintsvetmeta (Collection of scientific proceedings of Gintsvetmet). Moscow, 1990. pp. 189–196. 20. Fathi Habashi. Osnovy prikladnoy metallurgii : v dvukh tomakh. Tom 2. Gidrometallurgiya (Basis of applied metallurgy : in two volumes. Vol. 2. Hydrometallurgy). Translated from English. Moscow : Metallurgiya, 1975. 210 p. 21. Borbat V. F., Volkov V. I., Kazanskiy L. A. Proizvodstvo kobalta iz sulfidnykh rud (Manufacturing of cobalt from sulphur ores). Moscow : Metallurgiya, 1983. 104 p. 22. Shestakova R. D., Yurev A. I., Anisimova N. N. et al. Tsvetnye Metally — Non-ferrous metals. 2003. No. 8/9. pp. 34–37. 23. Krasnonosov V. P., Volkov V. I., Kitay A. G. et al. Metallurgiya i obogashchenie rud tyazhelykh tsvetnykh metallov (Metallurgy and concentration of ores of heavy non-ferrous metals). Sbornik nauchnykh trudov Gintsvetmeta (Collection of scientific proceedings of Gintsvetmet). Moscow, 1989. pp. 29–37. 24. Klets V. E., Emelyanov E. Yu. Tsvetnye Metally — Non-ferrous metals. 1989. No. 1. pp. 42–44. 25. Laptev Yu. V., Sirkis A. L., Kolonin G. R. Sera i sulfidoobrazovanie v gidrometallurgicheskikh protsessakh (Sulphur and formation of sulphides in hydrometallurgical processes). Novosibirsk : “Nauka”, Siberian Branch, 1987. 153 p. 26. G. Charlot. Metody analiticheskoy khimii. Kolichestvennyy analiz neorganicheskoy khimii (Methods of analytical chemistry. Quantitative analysis of inorganic chemistry). Translated from Franch. Under the general editorship of Yu. Yu. Lure. Moscow : Khimiya, 1965. pp. 802–803. |