MATERIALS SCIENCE AND TECHNOLOGY. MAGNETIC MATERIALS | |
ArticleName | Research Opportunities Ferrite 2000NM the Short Process Flow |
ArticleAuthor | V. G. Kostishin, I. I. Kaneva, V. G. Andreev, A. N. Nikolaev, E. I. Volkova |
ArticleAuthorData | University of Science and Technology MISiS V. G. Kostishin, I. I. Kaneva, V. G. Andreev, A. N. Nikolaev, E. I. Volkova |
Abstract | The possibility of obtaining Mn—Zn−ferrite 2000 NM on the short process flow, which differs from the usual lack of diffusion operations roasting and grinding. It is shown that the use of the basic composition in sintering processes develop secondary recrystallization and zonal isolation, leading to the formation of highly inhomogeneous microstructure obtained with low values of the magnetic permeability. A homogeneous microstructure characteristic recrystallization, managed by doping copper oxide and zinc. By doping CuO permeability far from the desired value, but its temperature coefficient is small. By doping ZnO reached the desired value of magnetic permeability, but dramatically increases its temperature coefficient. The optimum combination of the magnetic parameters obtained in complex copper oxides doped ferrite and zinc. |
keywords | Ferrite, secondary recrystallization, inhomogeneous microstructure |
References | 1. Federal'nyy zakon ot 26.06.2088 № 102−FZ. Ob obespechenii edinstva izmereniy // Rossiyskaya Gazeta. − Fed. vyp. № 4697. - 2008. - 2 iyul. |
Language of full-text | russian |
Full content | Buy |