Журналы →  Tsvetnye Metally →  2014 →  №1 →  Назад

RADIOACTIVE ELEMENTS
Название Removal of radioactive impurities from secondary platinum
Автор Ermakov A. V., Panfilov A. M., Batorshin G. Sh., Ryabov B. I., Bugrov K. V.
Информация об авторе

“Ural Innovation Technologies” JSC, Ekaterinburg, Russia:

A. V. Ermakov, Chief Executive Officer, phone: +7 (343) 270-87-00

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:

A. M. Panfilov, Assistant Professor of a Chair of Metallurgical Processes' Theory

 

Production Association “Mayak”, Ozersk, Russia:

G. Sh. Batorshin, Technical Officer – First Deputy Chief Executive Officer
B. I. Ryabov, Executive Officer of Chemical-Metallurgical Plant
K. V. Bugrov, Deputy Executive Officer of Radiochemical Plant – Head of Processing Production

Реферат

Purification of processed platinum group metals from a small content of radioactive elements (plutonium, thorium, uranium etc.) is often complex because of extremely low content of radioactive elements and their fairly equal distribution across the whole matrix of the base metal. In this case, traditional methods of purification and deactivation, used by Rosatom enterprises, become ineffective. Capability of effective purification of secondary platinum from radioactive pollution by methods of fire purification is shown. There were considered two methods of platinum purification from plutonium by the plutonium conversion into gas or slag phases. There was established, that conversion of plutonium in oxide form into the slag phase is more preferable. According to this, minimum loss of platinum is an apparent advantage of this method. For a score of reasons, both methods of platinum purification were used in practical application. The method of plutonium removal through its conversion into the slag phase has proved its efficiency and economic reasonability. Technology of fire purification of radioactively polluted platinum was developed on the basis of experiments, carried out at the Production Association “Mayak” (“Rosatom” Corporation). This technology was realized, using the inclusion of preliminary hydrometallurgical purification of platinum scrap surface from impurities of non-ferrous metals (Cu, Ni) into the technical plan.

Ключевые слова Platinum, plutonium, radiation pollution, fire purification, periclase crucible, gas and slag phases, liquid-alloy overheating, liquid-alloy cooling time
Библиографический список

1. Platina 2013: obzor rynka (Platinum 2013: market review). Johnson Matthey : translated from English. Moscow, 2013.
2. FactSage (2008). Ecole Polytechnique. Montreal. Available at: http://www.factsage.com/.
3. Spravochnik po redkim metallam : perevod s angliyskogo (Rare metals reference book : translated from English). Under the editorship of V. E. Plyushchev. Moscow : Mir, 1965. 931 p.
4. Kazenas E. K., Tsvetkov Yu. V. Termodinamika ispareniya oksidov (Thermodynamics of oxides' evaporation). Moscow : Publishing House LKI, 2008. 480 p.
5. Bekman I. N. Plutoniy : uchebnoe posobie (Plutonium : tutorial). Available at: http://profbeckman.narod.ru/PlutonSS.htm.
6. Ermakov A. V., Kuzmenko G. F., Matyukhin P. A., Khlebnikov A. I., Nikiforov S. V. Tigel dlya induktsionnoy ustanovki (Crucible for induction installation). Useful model patent RF, No. 114765. Published: April 10, 2012.
7. Ermakov A. V., Ryabov B. I., Bugrov K. V. Sposob regeneratsii vtorichnoy platiny s radioaktivnym zarazheniem plutoniem (Method of regeneration of secondary platinum with radioactive plutonium pollution). Application RF, No. 2012140886, G 21 F 9/28. Priority: September 24, 2012.

Language of full-text русский
Полный текст статьи Получить
Назад