Журналы →  Tsvetnye Metally →  2014 →  №5 →  Назад

ALUMINIUM, ALUMINA, CARBON MATERIALS
Название Types and thermal resistance of bottom blocks
Автор Ochkov V. V., Ulyanchenko S. V., Spektoruk A. A.
Информация об авторе

“Energoprom-Novosibirsk Electrode Plant” JSC, Novosibirsk Oblast, Iskitim region, Linevo, Russia:

V. V. Ochkov, Quality Head, phone: +7 (38343) 50-562

A. A. Spektoruk, Managing Director

 

“Energoprom Management” JSC, Moscow, Russia:

S. V. Ulyanchenko, Managing and Technical Development Director

Реферат

The “Energoprom-Novosibirsk Electrode Plant” JSC carried out a great scope of activities, aimed at the development of production of new types of bottom blocks, which are the parts of furnace bottom lining in reduction сells. These blocks work as a cathode in electrolytic aluminium smelting process. One of advantages of bottom blocks of “Energoprom-Novosibirsk Electrode Plant” JSC is the use of high-quality fusain anthracites of Gorlovka coal-field. Originally, structural peculiarities of this raw material pre-determine the high mechanical stability and thermal shock resistance, which is urgent for active commissioning of high-temperature and high current load reduction cells. Thermal shock resistance of bottom blocks is determined as breaking strength under thermal and mechanical stresses, emerging in a solid body as a consequence of uneven distribution of temperature in its separate parts, or limited possibility for body thermal expansion. The samples of production lots of N-1, N-2, N-3 and N-4 bottom blocks were taken as the research target at “Energoprom-Novosibirsk Electrode Plant” JSC. For each sample of the specified types of blocks, the thermal resistance values were measured together with determination of physical and mechanical properties. The received data allow to forecast thermal shock resistance, according to the trends to change the specific resistance in connection with material flexural strength. Each of the N-1, N-2, N-3 and N-4 bottom blocks is intended for different designs of aluminum cells.

Ключевые слова Bottom blocks, fusinite stone coals, material strength, thermal resistance, flexural strength, current loading, cathode
Библиографический список

1. Arkhipov G. V., Tretyakov Ya. A., Gorin D. A., Zavadyak A. V. Diagnosticheskiy kompleks KD-300 po kontrolyu tokovoy nagruzki, temperatury i deformatsii elektrolizera RA-300 (Diagnostic complex KD-300 for control of current loading, temperature and deformation of electrolyser RA-300). Alyuminiy Sibiri-2004 : sbornik dokladov X Mezhdunarodnoy konferentsii (Aluminium of Siberia-2004 : collection of reports of X International conference). Krasnoyarsk, 2004.
2. Oye H. A. Carbon cathode materials: Approval and quality control procedures. JOM. 1995. Iss. 2, Vol. 47, February. pp. 14–18.
3. Ostashevskaya N. S. Antratsity Gorlovskogo basseyna Zapadnoy Sibiri — syre dlya proizvodstva elektrodov (Stone coals of Gorlovka basin of Western Siberia — raw materials for manufacturing of electrodes). Novosibirsk : Nauka, 1978.
4. Ochkov V. V., Apalkova G. D., Seleznev A. N. Issledovanie mikroprochnosti zernovykh fraktsiy materialov vysokotemperaturnoy obrabotki pri proizvodstve perspektivnykh marok podovykh blokov dlya alyuminievykh elektrolizerov (Research of microstrength of grain fractions of materials of high-temperature processing in the time of production of prospective grades of bottom blocks for aluminium electrolyzers). Izvestiya vuzov. Tsvetnaya metallurgiya — Russian Journal of Non-Ferrous Metals. 2005. No. 4.
5. Seleznev A. N., Ochkov V. V., Pirogov V. A., Gnedin Yu. F., Kokhanovskiy S. A., Vinogradov A. Yu. Novye tipy podovykh blokov Zakrytogo aktsionernogo obshchestva “Novosibirskiy elektrodnyy zavod”. Nekotorye zakonomernosti formirovaniya ikh svoystv (New types of bottom blocks of “Novosibirsk Electrode Plant” JSC. Some regularities of formation of their properties). Novye ogneupory — New refractories. 2004. No. 9.
6. Sorlie M., Oye H. A. Katody v alyuminievom elektrolizere (Cathodes in aluminium electrolyzis). Translated from English by Polyakov P. V. Krasnoyarsk : Publishing House of Krasnoyarsk State University, 1997.
7. Seleznev A. N., Kim V. S., Pirogov V. I., Ochkov V. V., Sviridov A. A., Podkopaev S. A., Gnedin Yu. F., Vinogradov A. Yu., Apalkova G. D. Sovershenstvovanie ekspluatatsionnykh kharakteristik podovykh blokov alyuminievykh elektrolizerov (Improvement of exploitation characteristics of bottom blocks of aluminium electrolyzers). Uglerod: fundamentalnye problemy nauki, materialovedenie, tekhnologiya : materialy vtoroy mezhdunarodnoy konferentsii (Carbon: fundamental problems of science, materials science, technology : materials of the second international conference). Moscow : “Presto-RK” Publishing House, 2003.

Language of full-text русский
Полный текст статьи Получить
Назад