Journals →  Non-ferrous Metals →  2014 →  #1 →  Back

MAGNESIUM, TITANIUM, RARE METALS, SEMICONDUCTORS
ArticleName Production of silicon by electrolysis of halide and oxide-halide melts
ArticleAuthor Zaykov Yu. P., Isakov A. V., Apisarov A. P., Chemezov O. V.
ArticleAuthorData

Institute of High-temperature Electrochemistry of Ural Branch of Russian Academy of Sciences, Ekaterinburg, Russia:

Yu. P. Zaykov, Professor, Director, e-mail: dir@ihte.uran.ru

A. V. Isakov, Junior Researcher

A. P. Apisarov, Researcher

O. V. Chemezov, Senior Researcher

Abstract

Nowadays, silicon is widely used in electronic industry and metallurgy. Silicon nanomaterials can provide significant increasing of efficiency of anodes for lithium-ion electrochemical cells and photovoltaic cells. The main method of obtaining of high-purity silicon and silicon-based nanomaterials is a gas phase deposition. This method has a relatively high specific energy consumption and complex apparatus design. Therefore, it is urgent to develop new methods of silicon production. Electrolysis of molten salts is a promising method for production of silicon and silicon-based nanomaterials. Relatively cheap materials, such as K2SiF6 and SiO2, can be used in this case as raw materials. Solutions of potassium hexafluorosilicate or silica dioxide in the mixture of alkali metal halides are promising electrolytes. In this paper, electrolytic deposition of silicon from the KF – KCl – K2SiF6 and KF – KCl – K2SiF6 – SiO2 melts was investigated depending on the temperature, cathode current density and electrolyte composition. The process of silicon electrolysis was carried out in a laboratory scale cell with a high cathodic current yield (up to 93%). The composition and structure of the resulting deposits were studied, using scanning electron microscopy, X-ray diffraction and X-ray analysis. This paper represents the results of the silicon electrolysis in molten KF – KCl – K2SiF6 and KF – KCl – K2SiF6 – SiO2. Solid layers and silicon nanowires were obtained by the electrolysis of halide and oxide halide melts. Electron microscopy data and X-ray analysis revealed the influence of oxygen on the silicon cathode structure. There was found that addition of silica to molten KF – KCl – K2SiF6 reduces the average grain size.

This work was carried out with the financial support of the project of presidium of Russian Academy of Sciences (2012-2014) “Development of electrochemical method of obtaining of solar silicon from molten salts and creation of new silicon-based materials” (Project No. 12-P-3-1039 (12-П-3-1039).

keywords Silicon, electrolysis, molten salts, coatings, structure, grain size
References

1. Nemchinova N. V., Klets V. E. Kremniy: svoystva, poluchenie, primenenie (Silicon: properties, obtaining, application). Irkutsk : Publishing House of Irkutsk State Technical University, 2008. 272 p.
2. Gerasimenko N. N., Parkhomenko Yu. N. Kremniy — material nanoelektroniki (Silicon – nanoelectronics material). Moscow : Tekhnosfera, 2007. 352 p.
3. Candace K. Chan, Peng H., Liu G., Mc Ilwrath K., Zhang X. F., Huggins R. A. and Cui Y. High-performance lithium battery anodes using silicon nanowires. Nature Nanotechnology. 2008. No. 3. pp. 31–35.
4. Stelzner Th., Pietsch M., Andra G., Falk F., Ose E., Christiansen S. Silicon nanowires-based solar cells. Nature Nanotechnology. 2008. Vol. 19. pp. 203–295.
5. O’Mara W. C., Herring R. B., Hunt I. P. Handbook of semicon ductor silicon technology. New Jersey : Noyes Publications, 1990. 795 p.
6. Givargizov E. I. Rost nitevidnykh i plastinchatykh kristallov iz para (Growth of fibrus and lamellar crystals from steam). Moscow : Nauka, 1977. 304 p.
7. Chemezov O. V., Batukhtin V. P., Apisarov A. P., Isakov A. V., Zaykov Yu. P. Sposob polucheniya nano- i mikrovolokon kremniya elektrolizom dioksida kremniya iz rasplavov soley (Method of obtaining of nanofibre and microfibre of silicon by silicon dioxide electrolysis from salt melts). Patent RF, No. 2427526. Applied: June 01, 2012. Published: August 27, 2011.
8. Zaikov Yu. P., Redkin A. A., Apisarov A. A., Korzun I. V., Kulik N. P., Isakov A. V., Kataev A. A., Chemezov O. V. Silica solubility in molten fluoride-chloride electrolytes and density of KF – KCl – K2SiF6 – SiO2 melts. Journal of chemical and engineering data. 2013. Vol. 58(4). pp. 932–937.
9. Frolenko D. B., Martemyanova Z. S., Valeev Z. I., Baraboshkin A. N. Elektrokhimiya — Russian Journal of Electrochemistry. 1992. Vol. 28, No. 12. pp. 1737–1745.
10. Frolenko D. B., Martemyanova Z. S., Baraboshkin A. N., Plaksin S. V. Rasplavy – Melts. 1993. No. 5. pp. 42–49.

Language of full-text english
Full content Buy
Back