ArticleName |
Development of the technology of mine water
purification with pneumatic flotation machine of CFM series |
ArticleAuthorData |
“UMMC -Holding” LLC (Verkhnyaya Pyshma, Russia):
A. M. Panshin, Technical Director
Ural Federal University, Institute of Material Science and Metallurgy (Ekaterinburg, Russia): M. G. Viduetsky, Advisor of the Director, head of the Training Scientific and Research Center A. P. Purgin, Chief specialist, e-mail: purgin.alexandr@e1.ru V. A. Maltsev, Director I. F. Garifulin, Chief specialist |
Abstract |
Mine and quarry water is formed as a result of entering of ground water and surface water into the mine, where they are subjected to pollution by fine-suspended particles, metal ions and oil products. To assess the influence of various technological factors on the flotation results of oil products and other impurities from the mine water, a complete factorial experiment was carried out. The resulting equation has shown that the most influence on the degree of flotation purification of mine water is provided by rotational speed of the impeller of mechanical flotation machine that is directly related to the degree of air dispersion of air in the forming pulp-air mixture. Based on these research results, the pneumatic machines of CFM series can be considered as the most promising devices for flotation purification of mine water from oil products. They are characterized by pulp preparation for flotation due to its saturation with fine-dispersed air bubbles in ejecting devices as the key operating principle. Based on the results of pilot and industrial tests, the technological scheme of mine water purification was developed. It includes preliminary clarification of waste water, basic and control flotation in CFM, filtering of chamber product of CFM through the sorbent bed (activated carbon) and allows obtaining fully purified water of the required quality. |
keywords |
Mine water, water purification, suspended particles, oil products, flotation, pilot and
industrial tests, pneumatic flotation machines, CFM |
References |
1. Avdokhin V. M. Osnovy obogashcheniya poleznykh iskopaemykh (Mineral processing basis). Moscow : Gornaya kniga, 2008. 2. Smirnov A. D. Sorbtsionnaya ochistka vody (Sorption purification of water). Leningrad : Khimiya, 1984. 3. Hartmut von Kienle, Erich Bäder. Aktivnye ugli i ikh promyshlennoe primenenie (Active coals and their industrial use). Leningrad : Khimiya, 1984. 4. Domracheva V. A. Izvlechenie metallov iz stochnykh vod i tekhnogennykh obrazovaniy (Extraction of metals from waste waters and anthropogenic formations). Irkutsk : Publishing House of Irkutsk State Technical University, 2006. 5. Domracheva V. A., Shiyrav G. Adsorbtsionnoe izvlechenie ionov tyazhelykh metallov uglerodnymi sorbentami v staticheskikh usloviyakh (Adsorption extraction of heavy metal ions by carbon sorbents in static conditions). Tsvetnye Metally = Non-ferrous metals. 2013. No. 1. 6. Roev G. A., Yufin V. A. Ochistka stochnykh vod i vtorichnoe ispolzovanie nefteproduktov (Waste water purification and secondary use of oil products). Moscow : Nedra, 1987. 7. Bogdanov O. S. Opredelenie krupnosti vozdushnykh puzyrkov v pulpe flotatsionnykh mashin (Definition of coarseness of air bubbles in flotation machine pulp). Tsvetnye Metally = Non-ferrous metals. 1947. No. 2. 8. Panshin A. M., Garifulin I. F., Maltsev V. A. Viduetskiy M. G., Purgin A. P. Otsenka vliyaniya tekhnologicheskikh faktorov na skorost flotatsii sulfidnoy chasti tsinkovykh kekov (Assessment of influence of technological factors on flotation rate of sulfide part of zinc cakes). Gornyi Zhurnal = Mining Journal. 2013. No. 7. 9. Panshin A. M., Maltsev V. A., Viduetskiy M. G., Purgin A. P., Garifulin I. F. Opytno-promyshlennye ispytaniya tekhnologii flotatsii tsinkovogo keka s ispolzovaniem pnevmaticheskoy flotomashiny serii KFM (Experimental-industrial testings of zinc cake flotation technology using pneumatic columnar flotation machine). Tsvetnye Metally = Non-ferrous metals. 2013. No. 8. 10. Maltsev V. A., Viduetskiy M. G., Sokolov V. M., Bondarev A. A., Panshin A. M. Effektivnost primeneniya pnevmaticheskikh flotomashin serii KFM pri obogashchenii upornogo medno-tsinkovogo syrya (Efficiency of application of pneumatic columnar flotation machines in the time of concentration of refractory copper-zinc raw materials). Tsvetnye Metally = Non-ferrous metals. 2013. No. 3. pp. 15–21. 11. PND F 14.1:2:4.128-98. Kolichestvennyy khimicheskiy analiz vod. Metodika vypolneniya izmereniy massovoy kontsentratsii nefteproduktov v probakh prirodnykh, pitevykh, stochnykh vod fluorimetricheskim metodom na analizatore zhidkosti «Flyuorat-02» (Legal Normative-Technical Documentation F 14.1:2:4.128-98. Quantitative chemical analysis of waters. Methods of measurements of mass concentration of oil products in samples of natural, potable and waste waters by fluorimetric method on liquid analyzer«Flyuorat-02»). (in Russian). 12. Glembotskiy V. A., Klassen V. I. Flotatsiya (Flotation). Moscow : Nedra, 1973. 13. Taggart A. F. Spravochnik po obogashcheniyu poleznykh iskopaemykh (Mineral processing reference book). Moscow : State Scientific-Technical Publishing House, 1933. |