Журналы →  Tsvetnye Metally →  2015 →  №5 →  Назад

80-th ANNIVERSARY OF CHELYABINSK ZINC PLANT
Technologies, implemented in production
Название Mastering of technology of waelz-oxide calcination in pipe rotary furnace
DOI 10.17580/tsm.2015.05.06
Автор Degtyarev A. M., Ivakin D. A., Shumilin Yu. P., Mayorov S. P.
Информация об авторе

JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:

Degtyarev A. M., Head of Waelz-shop
Ivakin D. A., Head of Technological Bureau of Engineering Center, e-mail: dai@zinc.ru
Shumilin Yu. P., Leading Production Engineer of Engineering Center
Mayorov S. P., Deputy Manufacturing Head of Waelz-shop

Реферат

This article gives the results of mastering of technology of Waelz oxide calcination in pipe furnace in Chelyabinsk Zinc Plant. A flow hardware diagram is shown together with calcination process modes. Waelz oxide calcination technology includes the following measures:
- pelletizing of powdered oxide into pellets; calcination in pipe furnace;
- pellet cooling; milling of calcined oxide in ball-rod mill; gase cooling and cleaning with secondary fumes' recovering. Calcined product is prepared to leaching, while secondary fumes are washed with sodium carbonate and water from chlorine and fluorine.
Calcination is carried out in oxidizing atmosphere at the temperature of 900–1100 °C for efficient removal of halides and oxidation of iron (II), arsenic and metal sulfides. Residence time of material in high temperature zone is not less than 2–3 hours. The calcination technology, mastered in Chelyabinsk Zinc Plant allows to carry out the following measures:
– removing of Waelz oxide halides (up to a residual content of Cl <0.06% and F <0.01%);
– oxidation of Fe (II) and As, reduced their passing into solution during Waelz oxide leaching;
– increasing of solubility of zinc (up to 91%) and cadmium (80%) in Waelz oxide, simplifying its leaching technology and reducing metal loss;
– reduction of material amount approximately by 2 times, increasing the leaching flowsheet productivity.
As a result of the calcination technology, the shop processing Waelz oxide efficiency was increased by 33–36%. The wash water volume is 15–20 times lower during secondary fumes washing than during Waelz oxide washing, and obtained solution is suitable for concentration and evaporation.

Ключевые слова Waelz oxide, calcination, pelletizing, milling, chlorine, fluorine, zinc solubility, cadmium solubility
Библиографический список

1. Lakernik M. M., Pakhomova G. N. Metallurgiya tsinka i kadmiya (Metallurgy of zinc and cadmium). Moscow : Metallurgiya, 1969. 314 p.
2. Kozlov P. A. Velts-protsess (Waelz-process). Moscow : “Ore and Metals” Publishing House, 2002. 176 p.
3. Iordanov I. T., Popov M. Z., Karoleva V. D., Yanchev Ya. Kh. Opyt pererabotki velts-okislov na kombinate tsvetnykh metallov v gorode Plovdive (Narodnaya Respublika Bolgariya) (Experience of processing of Waelz-oxides at non-ferrous metals' combine in Plovdiv (People's Republic of Bulgaria)). Tsvetnye Metally = Non-ferrous metals. 1963. No. 1. pp. 23–30.
4. Panshin A. M., Kozlov P. A., Zatonskiy A. V., Gizatulin O. V., Ivakin D. A. Sozdanie tekhnologii prokalki velts-oksida s ispolzovaniem krupnogabaritnoy trubchatoy pechi (Creation of technology of Waelzoxide calcination using large pipe furnace). Tsvetnye Metally = Nonferrous metals. 2010. No. 5. pp. 17–20.
5. Panshin A. M., Kozlov P. A., Ivakin D. A., Vyatkin V. N. Kineticheskiy analiz vozgonki galogenidov v trubchatykh pechakh (Kinetic analysis of halide sublimation in pipe furnaces). Tsvetnye Metally = Nonferrous metals. 2013. No. 8. pp. 45–47.
6. Panshin A. M., Leontev L. I., Kozlov P. A., Dyubanov V. G., Zatonskiy A. V., Ivakin D. A. Tekhnologiya pererabotki pyli elektrodugovykh pechey Otkrytogo Aktsionernogo Obshchestva “Severstal” v veltskomplekse Otkrytogo Aktsionernogo Obshchestva “Chelyabinskiy Tsinkovyy Zavod” (Technology of processing of dust of JSC “Severstal” electric-arc furnaces in Waelz-complex of JSC “Chelyabinsk Zinc Plant”). Ekologiya i promyshlennost Rossii = Ecology and industry of Russia. 2012. No. 11. pp. 4–6.
7. Kozlov P. A., Zatonskiy A. V., Reshetnikov Yu. V., Girshengorn A. P., Ivakin D. A. Issledovanie i razrabotka tekhnologii gidrometallurgicheskoy pererabotki prokalennogo velts-oksida s izvlecheniem indiya (Research and development of technology of hydrometallurgical processing of calcined Waelz-oxide with indium extraction). Tsvetnye Metally = Non-ferrous metals. 2010. No. 5. pp. 49–51.
8. Skudnyy A. I., Kozlov P. A., Ivakin D. A., Zatonskiy A. V., Asadulin R. R. Pererabotka okislennykh materialov s vysokim soderzhaniem galogenidov (Processing of oxidized materials with high content of halides). Tsvetnye Metally = Non-ferrous metals. 2010. No. 5. pp. 52–53.
9. Kozlov P. A., Fatkhutdinova O. A., Zatonskiy A. V., Nesmelov V. Yu. Tekhnologiya ochistki stochnykh vod Otkrytogo Aktsionernogo Obshchestva “Chelyabinskiy tsinkovyy zavod” s izvlecheniem tsennykh komponentov i vnedreniem zamknutoy sistemy vodooborota (Technology of purification of waste waters of JSC “Chelyabinsk Zinc Plant” with extraction of valuable components and introduction of closed water circulation system). Izvestiya vuzov. Tsvetnaya metallurgiya = Russian Journal of Non-Ferrous Metals. 2014. No. 5. pp. 36–37.

Language of full-text русский
Полный текст статьи Получить
Назад