Журналы →  Tsvetnye Metally →  2015 →  №5 →  Назад

80-th ANNIVERSARY OF CHELYABINSK ZINC PLANT
Technologies, implemented in production
Название Improvement of processes of indium extraction from zinc production sulphate solutions using mixing-setting extraction equipment
DOI 10.17580/tsm.2015.05.08
Автор Zatonskiy A. V., Belyakov O. V., Kozlov P. A., Nedospasov A. V.
Информация об авторе

JSC “Chelyabinsk Zinc Plant”, Chelyabinsk, Russia:

A. V. Zatonskiy, Technical Director
O. V. Belyakov, Head of Hydrometallurgical Shop
P. A. Kozlov, Head of Engineering Center, e-mail: pak@zinc.ru
A. V. Nedospasov, Leading Production Engineer of Engineering Center

Реферат

Institute of Chemistry and Chemical Technology (Siberian branch of the Russian Academy of Sciences) designed new “mixer-settler” type extractors ESOT-1,0-15 (ЭСОТ) (polypropylene) and ESOT-0,8-5,5 (polyethylene with titan turbine type mixers). In 2013, these extractors were installed and tested in indium extraction department of hydrometallurgical shop of Chelyabinsk Zinc Plant. The modernized extraction unit is a cascade of three extraction (ESOT-1,0-15) and six re-extraction (ESOT-0,8-5,5) sequentially connected blocks. Production capacity of the unit is 15 m3/h of solution, counted as total volume of both phases. Extractor ESOT-1,0-15 is designed for indium extraction from sulphate-chloride acid solutions in raised temperatures (about 60 оС) with wide productive capacity range (max. 15 m3/h of solution as total volume of phases). Extractor ESOT-0,8-5,5 is designed for the processes of indium reextraction and extracting agent washing. Its production capacity does not exceed 5 m3/h of solution, counted as total volume of phases. Application of the units ESOT-1,0-15 and ESOT-0,8-5,5 made possible to carry out the following measures:
– efficient extraction in a wide range of the unit productive capacity (3–8 m3/h) of water phase with organic and water phases ratio 1:3 (not counting recirculation of organic phase);
– minimization of bilateral carry-over of water and organic phases (organic phase carry-over with raffinate was 0.2–0.5%, while water phase carry-over, saturated with extracting agent, was less than 0.3%);
– minimization of indium loss with raffinate (to 6–7 mg/l with productivity of 5–7.5 m3/h of water phase);
– ensuring of reliable performance of extraction unit with higher silica acid concentration in initial solution (to 0.4 g/dm3);
– consumption decrease on the unit production (cost decrease of basic materials by more than 10 times);
– maintenance simplification and extraction unit repair.

Ключевые слова Extractor, indium, liquid counterflow extraction, D2EHPA, extracting agent emulsion, synthetic fatty acids
Библиографический список

1. Fedorov P. I., Akchurin R. Kh. Indiy (Indium). Moscow : Nauka, 2000. 276 p.
2. Kazanbaev L. A. Puti sozdaniya bezotkhodnoy skhemy proizvodstva na Chelyabinskom elektrolitnom tsinkovom zavode (Ways of creation of wasteless manufacturing system at Chelyabinsk Electrolyte Zinc Plant). Tsvetnye Metally = Non-ferrous metals. 1985. No. 4. pp. 35–38.
3. Kazanbaev L. A., Kozlov P. A., Kubasov V. L., Travkin V. F. Indiy, tekhnologiya polucheniya (Indium, obtaining technology). Moscow : “Ore and Metals” Publishing House, 2004. 168 p.
4. Kazanbaev L. A., Geykhman V. V., Kozlov P. A., Marchenko A. K. Razrabotka usovershenstvovannoy tekhnologii ekstraktsii indiya iz sulfatnykh tsinkovykh rastvorov (Development of improved technology of indium extraction from sulfate zinc solutions). Tsvetnye Metally = Non-ferrous metals. 2000. No. 5. pp. 42–43.
5. Kazanbaev L. A., Geykhman V. V., Kozlov P. A., Marchenko A. K. Sovershenstvovanie tekhnologii reekstraktsii (Improvement of re-extraction technology). Tsvetnye Metally = Non-ferrous metals. 2000. No. 5. pp. 44–45.
6. Kazanbaev L. A., Girshengorn A. P., Kozlov P. A., Zagrebin S. A., Kolesnikov A. V. Sovershenstvovanie protsessov ekstraktsii indiya iz tsinkovykh rastvorov s ispolzovaniem ekstraktorov pulsatsionnogo tipa (Improvement of processes of indium extraction from zinc solutions using pulsation extractors). Tsvetnye Metally = Non-ferrous metals. 2005. No. 5/6. pp. 58–60.
7. Kazanbaev L. A., Kulmukhamedov G. K., Pashkov G. L., Fleytlikh I. Yu., Kozlov P. A. et al. Ekstraktsiya indiya iz tsinkovykh sulfatnykh rastvorov smesyami D2EGFK i monokarbonovoy kisloty (Extraction of indium from zinc sulfate solutions by D2EGFK (Д2ЕГФК) mixtures and monocarbone acid). Izvestiya vuzov. Tsvetnaya metallurgiya = Russian Journal of Non-Ferrous Metals. 2002. No. 4. pp. 16–20.
8. Kazanbaev L. A., Kozlov P. A, Marchenko A. K. Girshengorn A. P., Kalinovskiy A. A., Svetlakov S. V., Ilyasov D. F. Ekstraktsionnaya ustanovka dlya izvlecheniya indiya (Extraction unit for indium extraction). Patent RF, No. 2150527. Applied: June 08, 1999. Published: June 10, 2000.
9. Panshin A. M., Pashkov G. L., Fleytlikh I. Yu., Kozlov P. A., Zatonskiy A. V., Nedospasov A. V. Sovershenstvovanie protsessov ekstraktsii indiya iz sulfatnykh rastvorov tsinkovogo proizvodstva s ispolzovaniem ekstraktorov smesitelnootstoynogo tipa (Improvement of the processes of indium extraction from sulfate solutions of zinc production using mixer-settler extractors). Sbornik dokladov 4 mezhdunarodnogo kongressa “Tsvetnye metally 2012” (Collection of reports of the 4 international congress “Non-ferrous metals 2012”). pp. 214–220.
10. G. M. Ritcey, A. M. Ashbrook. Ekstraktsiya. Printsipy i primenenie v metallurgii (Solvent extraction. Principles and applications to process metallurgy). Moscow : Metallurgiya. 1983. 407 p.

Language of full-text русский
Полный текст статьи Получить
Назад