Журналы →  Gornyi Zhurnal →  2015 →  №5 →  Назад

PROCESSING AND COMPLEX USAGE OF MINERAL RAW MATERIALS
Название Turbulence-creating centrifugal separator engineering and testing
DOI 10.17580/gzh.2015.05.12
Автор Morozov Yu. P., Falei E. A., Khamidulin I. Kh.
Информация об авторе

Author 1:
Name & Surname: Morozov Yu. P.
Company: Ural State Mining University (Ekaterinburg, Russia)
Work Position: Professor
Scientific Degree: Doctor of Engineering Sciences
Contacts: e-mail: tails2002@inbox.ru


Author 2:
Name & Surname: Falei E. A.
Company: Ural State Mining University (Ekaterinburg, Russia)
Work Position: Researcher

 

Author 3:
Name & Surname: Khamidulin I. Kh.
Company: Ural State Mining University (Ekaterinburg, Russia)
Work Position: Engineer

Реферат

A promising way of enhancing extraction of finely dispersed noble metal particles from ore and mining waste is the centrifugal separators. Engineered in the 1900s, turbulence-creating centrifugal separators (TCS) feed weakening (turbulization) water flow from within the separator cone. The experimental modeling of turbulence-creating centrifugal separation of artificial mixtures allowed determination of optimal parameters for finely dispersed gold recovery. Based on laboratory research, a plant with TCS has been designed for processing of gold-bearing pyrite products. The introduction of these products in the closed-cycle combination dressing flowchart with hydrocyclones for copper–gold ore with gold mass fraction of 1 g/t enables 10% gold recovery in the primary concentrate with the gold mass fraction of 88% and more than 35% gold recovery in the gold-containing product with the gold mass fraction over 200 g/t. The industry testing of TCS in processing of tailings taken from Semenovskaya gold processing plant and from the preparation plant at the Buribaevsky Mining-and-Processing Integrated Works has yielded products suitable for metallurgical processing. The technology including the centrifugal separation of Buribaevsky MPIW tailings, with sinking fraction for copper cementation from underspoil water has been recommended for the industrial application. As a result of tests of a movable modular plant, composed of a gold-washer, sluice, settling well with a pump and TCS, the data have been obtained for validation of gold-bearing contents of placer mining waste at the river Vinnovka. Currently the engineering of TCS with feasible continuous discharge of sinking fraction is in progress.

Ключевые слова Gold ore, mining waste, turbulence-creating centrifugal separation, industry testing, production data
Библиографический список

1. Fedotov K. V., Tyutyunin V. V. Mekhanizm separatsii mineralnykh chastits v tsentrobezhnom pole (Meсhanism of separation of mineral particles in centrifugal field). Innovatsionnye protsessy kompleksnoy i glubokoy pererabotki mineralnogo syrya : materialy mezhdunarodnogo soveshchaniya «Plaksinskie chteniya-2013» (Innovation processes of complex and deep processing of mineral raw materials : materials of international meeting «Plaksin readings — 2013»). Tomsk : Publishing House of Tomsk Polytechnic University, 2013. pp. 98–99.
2. Bogdanovich A. V., Vasilev A. M., Alekseev M. P., Lepekhin V. M. Tsentrobezhnye separatory segregatsionnogo tipa i osobennosti ikh ispolzovaniya pri obogashchenii melkozernistykh rud i materialov (Centrifugal segregative separators and peculiarities of their use during concentration of fine ores and materials). Innovatsionnye protsessy kompleksnoy i glubokoy pererabotki mineralnogo syrya : materialy mezhdunarodnogo soveshchaniya «Plaksinskie chteniya-2013» (Innovation processes of complex and deep processing of mineral raw materials : materials of international meeting «Plaksin readings — 2013»). Tomsk : Publishing House of Tomsk Polytechnic University, 2013. pp. 223–225.
3. Morozov Yu. P., Faley E. A. Osobennosti formirovaniya pristenochnogo sloya v turbulizatsionnom tsentrobezhnom separatore (Peculiarities of formation of wall layer in turbulization centrifugal separator). Izvestiya vuzov. Gornyy zhurnal = Proceedings of universities. Mining Journal. 2013. No. 8. pp. 118–123.
4. Elshin A. N., Uskov V. M., Morozov Yu. P., Khamidulin I. Kh. Gidroudarnoe vskrytie i tsentrobezhnaya separatsiya zolotopiritnykh produktov (Hydropercussion opening and centrifugal separation of gold-pyrite products). Nauchnye osnovy i praktika pererabotki rud i tekhnogennogo syrya : materialy mezhdunarodnoy nauchno-tekhnicheskoy konferentsii (Scientific basis and practice of processing of ores and anthropogenic raw materials : materials of scientific-technical conference). Ekaterinburg : Fort Dialog-Iset, 2009. pp. 126–128.
5. Morozov Yu. P., Khamidulin I. Kh., Faley E. A., Cherkasov V. Yu. Nakopitelnye tekhnologii gravitatsionnogo izvlecheniya zolota pri obogashchenii sulfidnykh rud (Accumulative technologies of gravitation extraction of gold during concentration of sulfide ores). Izvestiya vuzov. Gornyy zhurnal = Proceedings of universities. Mining Journal. 2013. No. 7. pp. 102–106.
6. Morozov Yu. P. Teoreticheskoe obosnovanie i razrabotka novykh metodov i apparatov izvlecheniya tonkodispersnykh blagorodnykh metallov iz rud : dissertatsiya … doktora tekhnicheskikh nauk (Theoretical substantiation and development of new methods and equipment of extraction of fine-disperse noble metals from ores : Dissertation … of Doctor of Engineering Sciences). Ekaterinburg, 2001. 397 p.

Language of full-text русский
Полный текст статьи Получить
Назад