Journals →  Chernye Metally →  2015 →  #9 →  Back

Development of Metallurgy in Russia and CIS
ArticleName Tendencies of development of stand construction in rolling mills
ArticleAuthor S. V. Rodinkov, V. V. Pavlenko, V. G. Drozd, A. M. Kriventsov
ArticleAuthorData

State Scientific Center of RF All-Russian Design and Research Institute of Metallurgical Machine-Building named after A. I. Tselikov (Moscow, Russia):

S. V. Rodinkov, Cand. Eng., Head of Rolling Mills Dept., e-mail: ops-m@rambler.ru
V. V. Pavlenko, Cand., Eng., Dep. Head of Dept., e-mail: vvpavlenko@rambler.ru
V. G. Drozd, Cand. Eng., Scientific Secretary
A. M. Kriventsov, Dr. Eng., Leading Scientific Fellow, e-mail: sintezproekt@mail.ru

Abstract

Construction of rolling stands of medium-section and smallsection rolling mills are examined. The features of operation of rolling stands in section and bas production are reflected, their advantages and disadvantages are noted. It is shown that rather narrow specialization of section rolling mills in accordance with their geometrical dimension range can be considered as the main tendency of their current development, in order to achieve maximal technical and economical production efficiency. Analysis of rolling stands construction has displayed that most part of medium-section, small-section and wire rod rolling mills use housing-free non-stressed stands as the most rational technical solution. The most rational ranges of barrel diameters and lengths of rolls are suggested for different stand groups. Construction parameters of housing-free stands, providing the required stand stiffness in axial and radial directions, are recommended. A wide range of such rolling stands has been designed and with roll diameter 280–650 mm, with annual production 100–1,000 thousand tpy. The 280 rolling mill at the casting and rolling plant in Yartsevo is shown as an example of such design.

keywords Section mills, rolling stands, housing-free stands, axial and radial stiffness, roll diameter, roll barrel length, horizontal stands, vertical stands
References

1. Gritsuk N. F., Saprygin Kh. M., Gunin I. V. et al. Proizvodstvo sortovogo prokata v shirokom sortamente (Bar production in wide assortment). Moscow : Metallurgiya, 1973. 152 p.
2. Dukmasov V. G., Ageev L. M. Sostoyanie i razvitie tekhnologii oborudovaniya v mirovoy metallurgii : spravochnik (State and development of equipment technology in global metallurgy : reference book). Chelyabinsk : South Ural State University, 2002. pp. 112–136.
3. Gorlova A. A., Rodinkov S. V. Melkosortnyy prokatnyy stan 280 konstruktsii VNIIMETMASh. Zagotovitelnye proizvodstva v mashinostroenii (Light-section mill 280 constructed by “VNIIMETMASh” institute. Blank productions in industrial engineering). Mashinostroenie = Industrial engineering. 2009. No. 6. pp. 31–34.
4. Rodinkov S. V., Tselikov N. A., Pavlenko V. V. Prokatnye stany v sostave liteyno-prokatnykh kompleksov dlya proizvodstva melkosortnogo prokata. Zagotovitelnye proizvodstva v mashinostroenii (Rolled mills in composition of founding-rolling complexes for hoop production. Blank productions in industrial engineering). Mashinostroenie = Industrial engineering. 2005. No. 8. pp. 29–33.
5. Rodinkov S. V., Golubev A. K., Aksenov V. V. Kleti predvaritelno napryazhennoy konstruktsii dlya proizvodstva sortovogo prokata. Zagotovitelnye proizvodstva v mashinostroenii (Stands of posttensioned construction for bar production. Blank productions in industrial engineering). Mashinostroenie = Industrial engineering. 2005. No. 6. pp. 45–52.
6. Pasechnik N. V., Rodinkov S. V. Konstruktsiya kletey sovremennogo nepreryvnogo prokatnogo stana dlya proizvodstva prokata stroitelnogo sortamenta (Design of modern continuous mill stands for production of construction assortment rolled products). Tyazheloe mashinostroenie = Russian Journal of Heavy Machinery. 2008. No. 5. pp. 30–31.
7. Rodinkov S. V. Opredelenie optimalnogo diametra rabochikh valkov chernovoy gruppy melkosortnogo prokatnogo stana (Definition of optimal diameter of working rollers of roughing lightsection mill group). Tyazheloe mashinostroenie = Russian Journal of Heavy Machinery. 2010. No. 5. pp. 14–18.
8. Kriventsov A. M., Aksenov V. V., Sementsul R. V. et al. Sposob reglamentirovaniya uprugikh peremeshcheniy ruchev kalibra valkov sortoprokatnoy kleti (Method of regulation of elastic displacements of grooves of section rolling stand roller gauge). Patent RF, No. 2408444, V21V 1/16. Bulletin of Inventions. 2011. No. 1.
9. Konovalov L. V., Efimov A. S. Raschet prokatnykh valkov na ustalost s uchetom osobennostey ikh nagruzheniya i napryazhennogo sostoyaniya (Roller fatigue test taking into account their stressing and tension peculiarities). Vestnik mashinostroeniya = Industrial engineering bulletin. 1979. No. 3.

Language of full-text russian
Full content Buy
Back