| ArticleName |
Analysis of one of the shaft furnace modernization ways |
| Abstract |
The shaft surface of Mednogorsky copper-sulphuric plant was reconstructed in order to increase productivity and decrease dust entrainment. The upgrading followed the research and theoretical generalizations on blast smelting process of copper raw materials. The results of research work and new technology indicators were published in relevant articles. Technical and economic parameters of copper-smelting furnace thermal performance were improved. Its productivity was increased by 23.1%, fuel rat was decreased by 17.16% and dust entrainment was lowered by 51.35%. We show the analysis of the executed works at the plant in comparison with the established practice, experience and blast smelting theory. The results of the analysis and calculations of material and thermal balances showed the inaccuracy of theoretical generalizations where the shaft surface upgrading were based. The calculations proved that the proposed activities for shaft surface reconstruction are not able to decrease its productivity, lower fuel rat and improve technical and economic parameters. The work, carried out for shaft surface reconstruction, has no technological feasibility and theoretical foundation because all other conditions being equal the shaft surface productivity are decreased by 28.6%, fuel rat is increased by 22%. Moreover, at the blasting of 60–70% of possible nominal amount of air pumped in the furnace, all actions directed to increase its performance by upgrading of air headers connection points are extremely doubtful. |
| References |
1. Matyukhin V. I., Yaroshenko Yu. G., Matyukhin O. V., Bulatov K. V. Upgrading the thermal performance of shaft furnaces during the air supply reconstruction. Part 1. Tsvetnye Metally. 2016. No. 5. pp. 33–37.
2. Matyukhin V. I., Yaroshenko Yu. G., Matyukhin O. V., Bulatov K. V. Upgrading the thermal performance of shaft furnaces during the air supply reconstruction. Part 2. Tsvetnye Metally. 2016. No. 8. pp. 52–56.
3. Altushkin I. A., Korol Yu. A., Golov A. N. Innovations in copper metallurgy by the example of a realization of a reconstruction project of “Karabashmed” JSC. Part 1. Choice of a basic melting device. Tsvetnye Metally. 2012. No. 8. pp. 25–34.
4. Kostin V. I. Experience of operation of Vanyukov furnace on the JSC “Kombinat Yuzhuralnikel”. Tsvetnye Metally. 2011. No. 11. pp. 45–48.
5. Kitaev B. I. Heat exchange and problems of fuel economy in metallurgical furnaces. Trudy Uralskogo politekhnicheskogo instituta imeni S. M. Kirova. Sverdlovsk : UPI, 1951.
6. Smirnov V. I. Shaft smelting in non-ferrous metals metallurgy. Sverdlovsk : Metallurgizdat, 1955. 520 p.
7. Avetisyan Kh. K. Metallurgy of blister copper. Moscow : Metallurgizdat, 1954. 464 p.
8. Shakhov G. A. Copper metallurgy. Moscow : Metallurgizdat, 1940. 268 p.
9. Babadzhan A. A., Maltsev B. V. Production of blister copper. Sverdlovsk : Metallurgizdat, 1961. 352 p.
10. Smirnov V. I. Metallurgy of copper and nickel. Moscow : Metallurgizdat, 1950. 592 p.
11. Pimenov L. I. Mikhaylov V. I. Processing of oxidized nickel ores. Moscow : Metallurgiya, 1972. 336 p.
12. Smirnov V. I., Tseydler A. A., Khudyakov I. F., Tikhonov A. I. Metallurgy of copper, nickel and cobalt. Moscow : Metallurgiya, 1965. 404 p.
13. Zongliang Zhang, Jiale Meng, Lei Guo, Zhancheng Guo. Numerical Study of the Gas Distribution in an Oxygen Blast Furnace. Part 2: Effects of the Design and Operating Parameters. The Journal of The Minerals, Metals & Materials Society. 2015. Vol. 67, No. 9. pp. 1945–1955.
14. Skopov G. V. Giniyatullin G. Z. Autogenous shaft smelting of rolled copper concentrates. Tsvetnye Metally. 1991. No. 7. pp. 13–16.
15. Skopov G. V. Theoretical basis and practice of autogenous shaft smelting of sulfide pellets of zinc production clinker on concentrated oxygen blowing : thesis of inauguration … of Doctor of Engineering Sciences. Ekaterinburg, 1991. 38 p.
16. Liu B. N., Li Q., Zou Z. S., Yu A. B. Discussion on chemical energy utilisation of reducing gas in reduction shaft furnace. Dongbei Daxue Xuebao/ Journal of Northeastern University. 2015. Vol. 36, No. 9. pp. 1293–1296, 1301.
17. Dong H., Feng J.-S., Li P., Cai J.-J. Numerical simulation on gas flow affected by constructional parameters of pelletizing shaft furnaces. Dongbei Daxue Xuebao/Journal of Northeastern University. 2013. Vol. 34, No. 7. pp. 980–984.
18. Reznik I. D. Shaft smelting of oxidized ores. Moscow : Metallurgiya, 1983. 190 p.
19. Smirnov V. I. Practice of operation of copper smelting plants. Tsvetnye Metally. 1938. No. 10.
20. Diomidovskiy D. A., Shalygin L. M., Galnbek A. A., Yuzhaninov I. A. Calculations of pyroprocesses and furnaces of non-ferrous metals. Moscow : Metallurgizdat, 1963. 460 p.
21 Loskutov F. M., Tseydler A. A. Calculations for metallurgy of heavy nonferrous metals. Second edition. Moscow : Metallurgizdat, 1963. 591 p.
22. Diomidovskiy D. A. Non-ferrous metallurgy furnaces. Moscow : Metallurgizdat, 1956. 459 p. |
