Journals →  Tsvetnye Metally →  2018 →  #3 →  Back

METAL PROCESSING
ArticleName Theoretical researches on operation of isothermal distribution of tubes from difficult-to-form non-ferrous alloys in conditions of a short-term creep
DOI 10.17580/tsm.2018.03.12
ArticleAuthor Pasynkov A. A., Boriskin O. I., Larin S. N.
ArticleAuthorData

Tula State University, Tula, Russia:

A. A. Pasynkov, Assistant Professor of a Chair “Mechanics of Plastic Form Change”
O. I. Boriskin, Professor, Director of Polytechnic Institute
S. N. Larin, Professor, Assistant Professor of a Chair “Mechanics of Plastic Form Change”, e-mail: mpf–tula@rambler.ru

Abstract

The processes of isothermal deformation at a small deformation speed open up a wide range of possibilities to manufacture responsible-usage products from difficult-to-form alloys. The question of theoretical feasibility of the process of distribution of pipe billets with thin walls and high coefficients of distribution from difficult-to-form alloys is relevant these days. However, regardless of sufficient number of works, dedicated to research of the process, the question of theory of deformation of high-quality products from difficult-to-form alloys in the regime of short-term creep has not been assessed enough. The article presents the research results of the process of distribution of pipe billets in isothermal conditions, based on analytical methods such as mathematical and computer modelling as well as experimental research. It determines the optimal form and sizes of the instrument, which guarantee the best quality parameters of the obtained parts and the minimal force of deformation.
Our invstigation results are published with the sponsorship of the supporting institute Tula State University.

keywords Change of form, distribution, difficult-to-form non-ferrous alloys, force, punch, matrix
References

1. Unksov E. P. et al. Theory of plastic deformation of metals. Moscow : Mashinostroenie, 1983. 598 p.
2. Romanov K. I. Mechanics of hot forming of metals. Moscow : Mashinostroenie, 1993. 240 p.
3. Springer P., Prahl U. Characterisation of mechanical behavior of 18CrNiMo7-6 steel with and without nb under warm forging conditions through processing maps analysis. Journal of Materials Processing Technology. 2016. Vol. 237. pp. 216–234.
4. Netoa D. M., Martins M. P., Cunha M., Alves L. M., Oliveira C., Laurent H., Menezes L. F. Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions. International Journal of Solids and Structures. Available online 2017.
5. Zhengyang Cai, Min Wan, Zhigang Liu, Xiangdong Wu, Bolin Ma, Cheng Cheng. Thermal-mechanical behaviors of dual-phase steel sheet under warmforming conditions. International Journal of Mechanical Sciences. 2017. Vol. 126. pp. 79–94.
6. Yi Meng, Jian-Sheng Zhang, Yu-Shi Yi, Jie Zhou, Sumio Sugiyama, Jun Yanagimoto. Study on the effects of forming conditions on microstructural evolution and forming behaviors of Cr – V – Mo tool steel during multi-stage thixoforging by physical simulation. Journal of Materials Processing Technology. 2017. Vol. 248. pp. 275–285.
7. Kräusel V., Birnbaum P., Kunke A., Wertheim R. Metastable material conditions for forming of sheet metal parts combined with thermomechanical treatment. CIRP Annals — Manufacturing Technology. 2015. Vol. 65, Iss. 1. pp. 301–304.
8. Aksenov S. A., Chumachenko E. N., Kolesnikov A. V., Osipov S. A. Determination of optimal gas forming conditions from free bulging tests at constant pressure. Journal of Materials Processing Technology. 2015. Vol. 217. pp. 158–164.
9. Kyung-Hun Leea, Byung-Min Kim. Advanced feasible forming condition for reducing ring spreads in radial-axial ring rolling. International Journal of Mechanical Sciences. 2013. Vol. 76. pp. 21–32.
10. Malinin N. N. Creeping in metal working. Moscow : Mashinostroenie, 1986. 216 p.
11. Yakovlev S. P., Chudin V. N., Yakovlev S. S., Sobolev Ya. A. Isothermal deformation of high-strength anisotropic materials. Moscow : Mashinostroenie, 2004. 427 p.
12. Yakovlev S. S., Yakovlev S. P., Chudin V. N., Tregubov V. I., Chernyaev A. V. Isothermal forming of anisotropic materials by hard tool in the mode of shortterm creeping. Moscow : Mashinostroenie, 2009. 412 p.
13. Pasynkov A. A., Perepelkin A. A. Influence of anisotropy of work material on the force distribution parameters in the mode of short-term creeping. Vestnik TulGU. Avtomatizatsiya: problemy, idei, resheniya. Tula : TulGU, 2015. pp. 113–117.
14. Pasynkov A. A., Yakovlev S. S. Assessment of influence of anisotropy of mechanical properties on deformation modes of distribution in the conditions of short-term creeping. Vestnik TulGU. Avtomatizatsiya: problemy, idei, resheniya. Tula : TulGU, 2015. pp. 117–120.

Language of full-text russian
Full content Buy
Back