Journals →  Tsvetnye Metally →  2018 →  #11 →  Back

BENEFICATION
ArticleName The effect of the concentration of non-ionic collector — allyl ether amylxanthate acid on flotation of copper-molybdenum ores
DOI 10.17580/tsm.2018.11.02
ArticleAuthor Morozov V. V., Pesriak I. V., Erdenezul J.
ArticleAuthorData

NUST MISiS, National University of Science and Technology “MISiS”, Moscow, Russia:

V. V. Morozov, Professor of Department “General and inorganic chemistry”, e-mail: dchmggu@mail.ru
I. V. Pesriak, Assistant Professor of Department “General and inorganic chemistry”, e-mail: spestryak.mail.ru
J. Erdenezul, Aspirant of the Department “General and inorganic chemistry”, e-mail zul479@gmail.com

Abstract

Residual non-ionic collector concentration is often used as an additional parameter of flotation process. In non-ionic collector application, common methods for determining its residual concentration are not effective. The developed spectral method enables measuring the non-ionic collector (allyl ether amylxanthate acid) concentration in aqueous solution — liquid phase of copper-molybdenum flotation pulp. The laboratory study findings have demonstrated the relationship between the residual concentration and the main parameters and indicators of copper-molybdenum flotation. The studies showed increasing the residual concentration with increasing its flow rate and the pulp pH. The increase in metal recovery was found at the collector residual concentrations of 0.25 to 0.5 mg/l for copper and 0.25 to 1 mg/l for molybdenum pyritic iron. The inverse proportion of the residual concentration and the ore fineness number was revealed. The possibility of using the residual concentration of a nonionic collector as a characteristic flotation parameter has been substantiated. The method of determining the optimum copper-molybdenum ore coarseness based on the collector residual concentration in aqueous phase of the pulp, taking into account decreasing the recovery of copper, molybdenum, and pyrite due to decreasing the collector concentration, has been described. Three-parameter regression dependences of metal recovery on yield of –63 mcm ground product grain size and the collector concentration were applied for accounting of the collector concentration effect on the flotation performance. The obtained dependences were used for improving the model for calculating the optimal flotation parameters based on the normalized losses criterion. The developed model was applied to calculate the optimal grain size of coppermolybdenum ore (after grinding) at the Processing Plant of the Erdenet Mining Corporation. The study findings enabled adjusting the value of the optimum finished grain size portion, which proved 1% lower compared with the previously calculated value. This enabled increasing the recovery of copper and molybdenum into the concentrates by 0.7–1.2%, respectively, keeping quality of the concentrates.

keywords Grinding, flotation, copper-molybdenum ores, collector concentration, UV spectrophotometry, modeling, optimization
References

1. Chander S. On the design of a feedback reagent control system for sulphide mineral flotation. Proceedings of 16th International Mineral Processing Congress. Stockholm, 1988. Amsterdam, 1988. Pt. B. pp. 1689–1700.
2. Morozov V. V., Avdokhin V. M. Beneficiation of polymetallic ores optimized through ion control of slurry and recirculation waters. Mining Informational and Analytical Bulletin. 1998. No. 1. pp. 27–32.
3. AZhF-6 photometric fluid analyser. Specification. Available at: http://ptkkip.ru/publics/item/4205
4. Hao F., Davey K. J., Bruckard W. J., Woodcock J. T. Online analysis for xanthate in laboratory flotation pulps with a UV monitor. International Journal of Mineral Processing. 2008. No. 89 (1–4). pp. 71–75. 5. Lalla B., Knights B. D. H., Steenkamp C. J. H. Online Measurement of Xanthate in Flotation Circuits by Means of UV Spectrophotometry. Proceedings of the 48th Annual Conference of Metallurgists COM – 2009. Sudbury, Canada, 2009. pp. 46–48.
6. RD 52.24.390–2009. Mass concentration of xanthates in waters. Extraction photometry procedure. Developed by: L. V. Boeva, E. L. Selyutina. Hydrochemical Institute of the Federal Service for Hydrometeorology and Environmental Monitoring. 2009. 38 p.
7. Sivkova R. I., Voronina L. V., Molodtsova V. I. Method of quantitative determining of esters of xanthogenic acids. Patent USSR, No. 726472. Published: 05.04.1980. Bulletin No. 7.
8. Ganbaatar Z., Zimin A. V., Solovieva L. M., Nazarov Yu. P. Improvement of beneficiation technology for copper-molybdenum ores from Erdenetiyn-Ovoo deposit. Gornyi Zhurnal. 2010. No. 10. pp. 34–36.
9. Siegbahn K., Nordling K., Feldman A. Electron spectroscopy. Moscow : Mir, 1997. 494 p.
10. Kitaeva N. B. Understanding the physical and chemical properties and flotation activity of allyl ethers of alkyl xanthic acids : Dissertation ... of Candidate of Engineering Sciences. Moscow, 1970. 147 p.
11. Bocharov V. A., Khachatryan L. S., Ignatkina V. A., Baatarkhuu Zh. Study of optimized reagent regimes in the flotation of porphyry copper-molybdenum ores. Fiziko-tekhnicheskie problemy razrabotki poleznykh iskopaemykh. 2008. No. 1. pp. 111–117.
12. Zanin M., Ametov I., Grano S., Zhou L., Skinner W. A study of mechanisms affecting molybdenite recovery in a bulk copper/molybdenum flotation circuit. International Journal of Mineral Processing. 2009. Vol. 93. pp. 256–266.
13. Abramov A. A. Flotation. Sulfide minerals : Collected writings. Vol. 8. Moscow : Gornaya kniga, 2013. 704 p.
14. Abramov A. A. Theoretical basis for innovative flotation processes. Part VI. Theoretical basis for enhancing the selective activity of frothing reagents in flotation. Tsvetnye Metally. 2014. No. 1. pp. 41–44.
15. Ganbaatar Z., Sokolov V. I. Optimised grinding and classification process for complex copper-molybdenum ores. Mining Informational and Analytical Bulletin. 2005. No. 7. pp. 320–325.
16. Pestryak I. V. Simulation and study of the physical and chemical processes in recirculation water conditioning. Fiziko-tekhnicheskie problemy razrabotki poleznykh iskopaemykh. 2015. No. 4. pp. 143–150.
17. Morozov V., Ganbaatar Z., Delgerbat L., Bokányi L., Stoliarov V. Advanced System for Control Milling and Flotation Processes Based on an Estimation of Ore Quality Grade. Advanced materials research. 2012. Vol. 651. pp. 981–985.
18. Erdenezul Jargalsaikhan, Khurelchuluun Ishgen. Process optimization of grinding and flotation of copper-molybdenum ores with the use of modelbased criteria. Proceedings of 22nd International Conference on Environment and Mineral Processing. Technical university of Оstrava, 2018. pp. 152–154.

Language of full-text russian
Full content Buy
Back