Journals →  Tsvetnye Metally →  2018 →  #11 →  Back

LIGHT METALS, CARBON MATERIALS
ArticleName Production of high-purity alumina through processing of ammonia alum extracted from nepheline
DOI 10.17580/tsm.2018.11.06
ArticleAuthor Matveev V. A., Mayorov D. V.
ArticleAuthorData

Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of the Russian Academy of Sciences Kola Science Center, Apatity, Murmansk Region, Russia:
V. A. Matveev, Head of Laboratory, e-mail: matveev@chemy.kolasc.net.ru
D. V. Mayorov, Senior Research Associate, e-mail: mayorov@chemy.kolasc.net.ru

Abstract

This paper describes the results of a study that looked at the processing of ammonia alum extracted from nepheline to produce high-purity aluminium oxides. It is shown that the alkaline impurities in the inter-crystalline regions, which are a part of the aluminium hydroxide formed during the ammonation of ammonia alum, can be successfully removed when the hydroxide is transformed into a compound of different class, e.g. aluminium and ammonium bicarbonate NH4AlCO3(OH)2. Moreover, such compound has a great potential to become a source of finely dispersed aluminium oxides. Initial ammonia alum was extracted from the sulfuric acid solutions of nepheline concentrate by crystallization at 15 оC, followed by recrystallization aimed at reducing the impurities. The ammonia alum with the following composition (on a dry matter basis), weight %: 0.05–0.06 K2O and 0.06–0.07 Na2O, was hydrolyzed with gaseous ammonia. The ammonation product, which is a mixture of aluminium hydroxide and ammonium sulfate, was leached with water. The resultant suspension was filtered, and the aluminium hydroxide precipitate – thoroughly washed. The aluminium hydroxide was then autoclaved with ammonium carbonate solutions at various concentrations, processing times and temperatures. The reaction product was subjected to IR spectroscopic, differential thermal and X-ray phase analysis, which showed that NH4AlCO3(OH)2 was formed in all cases. А γ-form of aluminium oxide with less than 0.02 wt.% of K2O and Na2O was obtained through heat treatment of the NH4AlCO3(OH)2 samples at 550 оC. The specific surface area and porosity of the γ-Al2O3 samples were estimated. They were 374–406 m2/g and 0.72–0.81 cm3/g, respectively. Based on their characteristics, such γ-Al2O3 samples can be used for the production of catalysts, adsorbents and desiccants. An X-ray phase analysis of the products resultant from the heat treatment of γ-Al2O3 at 1100–1250 оC for 1 hour showed that even at 1150 оC it almost completely transforms into corundum, which indicates a high sintering activity of the resulting alumina and predetermines the possibility of using it in alumina ceramics production. Using the data from the conducted research, the authors demonstrate how to obtain high-purity aluminum oxides through processing of ammonia alum extracted from nepheline. A process flow diagram is also included.

keywords Potassium alum, ammonia alum, hydrated aluminium oxide, alkaline impurities, ammonium carbonate, aluminium bicarbonate, ammonium bicarbonate, ammonia, aluminium oxide
References

1. Ivanova A. S. Aluminium oxide: Application, production, structure and acid-base properties. Promyshlennyi kataliz v lektsiyakh. 2009. No. 8. pp. 7–61.
2. Gavrilova N. N., Kruglaya T. I., Myachina M. A., Nazarov V. V., Skudin V. V. γ-Al2O3-based structured carrier for catalytic membranes. Steklo i keramika. 2018. No. 1. pp. 29–35.
3. Hiaofu Hu, Yunqi Liu, Chenguang Liu. Facile Synthesis of Ammonium Aluminum Carbonate Hydroxide Multilayered Nanofiber by Using Solid State Reaction. Advanced Materials Research. 2012. Vols. 415–417. pp. 580–584. DOI: 10.4028/www.scientific.net/AMR.415-417.580
4. GOST 30559–98. Alumina, nonmetallurgical. Revised: 01.01.2002. Revised: 10.04.2018.
5. Korchuganova E. N. Leaching of soluble impurities coming from industrial aluminium hydroxide. Vestnik vostochnoukrainskogo natsionalnogo universiteta im. Vladimira Dalya. 2014. No. 9 (216). pp. 15–18.
6. Khanamirova A. A. Effect of aluminium hydroxides and oxides production conditions on the sintering process and the properties of ceramics. Khimicheskiy zhurnal Armenii. 2007. Vol. 60. No. 4. pp. 664–673.
7. Khanamirova A. A., Apresyan L. P., Adimosyan A. R. Production of highly dispersed aluminium hydroxide during carbonization of partially disilicated solutions. Khimicheskiy zhurnal Armenii. 2007. Vol. 55, No. 3. pp. 51–61.
8. Kuznetsova T. F., Sobolenko N. M., Barkatina E. N. Method to produce aluminium hydroxide. Certificate of Authorship USSR, No. 1705237. Applied: 09.01.90. Published: 15.01.92. Bulletin No. 2.
9. Popov V. V. Dispersed hydrated oxide systems: Formation regularities. Zhurnal neorganicheskoy khimii. 2015. Vol. 60, No. 4. pp. 478–486.
10. Panasyuk G. P., Azarova L. A., Belan V. N., Semenov E. A., Danchevskaya M. N., Voroshilov I. L., Kozerozhets I. V., Pershikov S. A., Kharatyan S. Yu. Methods to produce high-purity aluminium oxides for growing leucosapphire crystals (overview). Khimicheskaya tekhnologiya. 2017. No. 9. pp. 393–400.
11. Khanamirova A. A. Alumina and ways to reduce impurities in it. Erevan : Izdatelstvo Akademii nauk Armyanskoy SSR, 1983. 244 p.
12. Kazantseva E. L., Tolchev A. V., Larin D. D. Localisation of impurities in aluminium oxides. Neorganicheskie materialy. 2011. Vol. 47, No. 11. pp. 1384–1387.
13. Panasyuk G. P., Belan V. N., Voroshilov I. L., Kozerozhets I. V. Hydrargillite to boehmite transformation. Neorganicheskie materialy. 2010. Vol. 46, No. 7. pp. 831–837.
14. Kozerozhets I. V. Development of the production method for and study of submicron and nanoparticles of high-purity aluminium oxides: thesis of Dissertation ... of Candidate of Chemical Sciences. Moscow : IONKh, 2011. 23 p.
15. Robin L., Mathieu D., Fabien S., Malika B., Didier Colson, et al. Ammonium aluminium carbonate hydroxide NH4Al(OH)2CO3 as an alternative route for alumina preparation: Comparison with the classical boehmite precursor. Powder Technology. 2017. Vol. 320. pp. 565–573.
16. V. A. Matveev, D. V. Mayorov. Method of producing aluminium oxide. Patent RF, No. 2632437. Applied: 21.10.16. Published: 04.10.17. Bulletin No. 28.
17. Zakharov V. I., Matveev V. A., Mayorov D. V. Understanding the effect of the nepheline acid processing parameters on the filterability of silica precipitates. Zhurnal prikladnoy khimii. 1996. Vol. 69, Iss. 3. pp. 365–369.
18. Rabinovich V. A., Khavin Z. Ya. Quick reference book on chemistry. Leningrad : Khimiya, 1977. 375 p.
19. Matveev V. A., Zakharov V. I., Mayorov D. V. A study into the production of aluminium hydroxide with a pseudoboehmite structure. Tsvetnye Metally. 2012. No. 4. pp. 46–49.
20. Guang-Gi Li, Yun-Qi Liu, Li-Li Guan, Xiao-Fu Hu, Chen-Guang Liu. Meso/macroporous γ-Al2O3 fabricated by thermal decomposition of nanorods ammonium aluminium carbonate hydroxide. Materials Research Bulletin. 2012. No. 47. pp. 1073–1079.
21. Ali A. A., Hasan M. A., Zaki M. I. Dawsonite-Type Precursors for Catalytic Al, Cr and Fe Oxides: Synthesis and Characterization. Chemistry of Materials. 2005. Vol. 17. pp. 6797–6804.
22. XueHui Li, Zhe Tang, YongMing Chai, RuiYu Zhao, Chenguang Liu. Hydrothermal Sinthesis of Ammonium Aluminum Carbonate Hydroxide (AACH) Nanoplatelets and Nanofibers pH-controlled Morpfologies. Proceedings of 2012 International Conference on Mechanical Engineering and Material Science (MEMS 2012). 2012. pp. 601–603.
23. Dubert D. C., Perez-Ramirez J., Garcia-Valls R. Continuous Synthesis of Ammonium Dawsonite Within a New Microstructured System. Chemical Engineering Transactions. 2011. Vol. 25. pp. 231–236.

Language of full-text russian
Full content Buy
Back