Журналы →  Chernye Metally →  2019 →  №5 →  Назад

New developments of Tula State University
Название Error analysis of evolvent worm milling cutters with carbide-tipped multi-faceted inserts
Автор O. I. Boriskin, N. G. Stakhanov, I. V. Gorynina
Информация об авторе

Tula State University (Tula, Russia):

O. I. Boriskin, Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute
N. G. Stakhanov, Cand. Eng., Prof.
I. V. Gorynina, Post-Graduate, E-mail: goriv1356@gmail.com

Реферат

The increase in hardness of working surface of gear wheels is an effective way of improvement of load capacity and durability of gears. However the requirements for rigidity of gear-cutting equipment and for stability of cutting tools are significantly increase. Actually carbide-tipped worm cutters are widely employed to process small-pitch wheels of steel, cast iron, non-metallic materials as well as to cut tempered cylindrical wheels with big gear module. Suchlike cutters are made from several parts with removable multifaceted cutting plates due to deficiency of hard alloys. However, the problems of shaping such cutters have not been solved enough. In the design and manufacture there are deviations in the profile of the tooth-plate, which can then be transferred to the workpiece. In the article the main sources of arising errors are identified, techniques and methods are developed that allow them to be minimized. In particular, a theoretically exact calculation of worm cutters is proposed, which excludes deviations that depend on the profiling method. The analysis of geometrical accuracy of such cutters has shown that if the front corners are present, the profile of the lateral sides of the tooth will be asymmetric. This complicates the use of double-sided plates, since when they rotate around the longitudinal axis by 180° new cutting edges come into operation that do not coincide with the original ones. To avoid this phenomenon, the authors of the article proposed two variants of using such plates with the preservation of a theoretically correct profile. The first of these is to make a helical back surface of the involute worm mills. In this case, when the plate-tooth is rotated relative to the longitudinal axis, the profile angles will be required. The second option is to use two working enclosures with different thread directions. The recommendations proposed in the article will allow to increase the accuracy of worm gear cutters and economically use the scarce solid alloy.

Ключевые слова Worm cutters, tempered cylindrical wheel, profile, profiling method, accuracy, error, profile angle
Библиографический список

1. Grechishnikov V. А., Domnin P. V., Kosarev V. А. et. al. Modern methods for solving the tasks of shaping a complex cutting tool. Stanki i instrument. 2013. No. 12. pp. 6–11.

2. Kalashnikov А. S., Morgunov Yu. А., Kalashnikov P. А. Modern methods for machining gears. Moscow: Izdatelsky dom «Spektr», 2012. 238 p.
3. Chemborisov N. А., Devzheeva Т. G. Overview of methods for worm mill profiling gear rings. Metalloobrabotka. 2010. No. 4. pp. 2–6.
4. Fetvaci M. C. Determination of effective involute parameter limit in generation simulation of gears manufactured by rack-type cutters. Mechanics & Industry. 2017. Vol. 18. No. 4. 7 p.
5. Mate M., Hollanda D. About the profile accuracy of the involute gear hob. Electrical and Mechanical Engineering. 2017. Vol. 9. pp. 5–18.
6. Radzevich S. P. A novel design of cylindrical hob for machining of precision involute gears. ASME Journal of Mechanical Design. 2007. Vol. 129. No. 3. pp. 334–345.
7. Simon V. Computer aided loaded tooth contact analysis in cylindrical worm gears. ASME Journal of Mechanical Design. 2005. Vol. 127. No. 5. pp. 973–981.
8. Tseng J. T., Tsay C. B. Mathematical modeling and surface deviation of cylindrical gears with curvilinear shaped teeth cut by a hob cutter. ASME Journal of Mechanical Design. 2005. Vol. 127. No. 5. pp. 982–987.
9. Yamnikov A. S., Yamnikova O. A., Boriskin O. I., Troitsky D. I. Physical modeling of cast iron radiator nipple oppositely directed thread turn milling. CIS Iron and Steel Review. 2017. Vol. 14. pp. 40–44.
10. Yong Hu, Mingjun Xiang, Xing Qiu, Pengfei Song, Jingan Song, Fuhua Peng. An improved design of inserted tooth finishing hob for involute gears. Journal of Mechanical Science and Technology. 2014. Vol. 28. No. 8. pp. 3203–3208.
11. Gorynina I. V. Method for worm mill profiling for machining cylindrical gear parts. Izvestiya TulGU. Seriya. Tekhnicheskie nauki. 2017. Iss. 8. Part. 1. pp. 101–104.
12. Boriskin О. I., Stakhanov N. G., Yakushenkov А. V., Khludov S. Ya., Gorynina I. V. Analysis of accuracy of the profile of involute worm milling cutters with carbide multi-faceted inserts. Izvestiya TulGU. Seriya: Tekhnicheskie nauki. 2016. Iss. 3. pp. 143–146.
13. GOST 9324-80. Finishing single-start hobbing cutters for cylindrical involute gears. Specifications. Introduced: 01.01.1982.
14. Boriskin О. I., Stakhanov N. G., Yakushenkov А. V., Khludov S. Ya., Gorynina I. V. The use of multi-faceted inserts for worm gear milling cutters. Izvestiya TulGU. Seriya: Tekhnicheskie nauki. 2018. Iss. 2. pp. 310–314.

Language of full-text русский
Полный текст статьи Получить
Назад