| ArticleName |
Innovative engineering solutions in the foundry and metallurgical industry |
| ArticleAuthorData |
Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia):
L. I. Leushina, Cand. Eng., Associate Prof., Dept. “Metallurgical technologies and equipment”, e-mail: kafmto@mail.ru |
| Abstract |
Scientific-practical seminar on innovations in metallurgical and casting processes that has been conducted in Nizhniy Novgorod State Technical University named after R. E. Alekseev 31 May 2019. This year it was dedicated to the 110th anniversary of the birth of one of the founders of the Nizhny Novgorod Scientific-Pedagogical School of Metallurgy and Foundry A.A. Ryzhikov. The seminar was attended by representatives of more than 30 organizations, industrial enterprises, research and production firms, research organizations and universities. The venue of such a seminar was not chosen by chance. The department «Metallurgical technologies and equipment» is the successor and successor of the glorious traditions of the metallurgical faculty, performs the functions of producing in the direction of «Metallurgy», being the base for the Nizhny Novgorod regional branch of the Russian Foundry Association. An exchange of views took place, discussions were held on the problems of modernizing production, using modern equipment, improving product quality, developing and introducing innovations, and adapting new technical solutions to the conditions of specific enterprises. |
| References |
1. STELEX* ZR ULTRA — a new generation of ceramic foam filters. Liteynoe proizvodstvo. 2015. No. 11. pp. 38–40.
2. Levkov L. Ya., Shurygin D. А., Dub V. S., Klochay V. V. Control and management of chemical homogeneity of the ingots at electroslag remelting. Chernye Metally. 2018. No. 11. pp. 75–80.
3. Mercurelli G., Zani М., Svanera М., Biebricher U., Franz H. Manufacture of large-size forged ingots via electric slag remelting. Chernye Metally. 2016. No. 5. pp. 23–30.
4. Levkov L. Ya., Kiselman М. А., Shurygin D. А. et. al. Features of the process of cyclic electroslag remelting of steel ChS-82 (04Kh14T3R1F). Metallurg. 2018. No. 2. pp. 35–41.
5. Treninkov I. А., Filonova Е. V., Medvedev P. N., Lukina Е. А. Regularity of the texture and microstructure formation in a heat-resistant nickel alloy during selective laser melting. Novosti materialovedeniya. Nauka i tekhnika. 2018. No. 1-2 (29), p. 2.
6. Shrayder А. V., Dardesov А. А., Motov S. N. New technological possibilities for production of rolling rolls of the NKMZ brand. Stal. 2014. No. 12, pp. 72–73.
7. Shakhmatov А. V., Kolpishon E. Yu., Kazakov А. А. Study of the morphology of δ-ferrite over the cross section of an ingot of cast highnitrogen steel. Tyazheloe mashinostroenie. 2016. No. 7-8. pp. 9–11.
8. Khaydorov А. D., Yunusov F. А. Heat treatment technology for high alloy steels in vacuum furnaces. Zagotovitelnye proizvodstva v mashinostroenii. 2017. Vol. 15. No. 6, pp. 271–276.
9. Yashkova S. S. Laser surface hardening. Molodoy uchenyi. 2017. No. 1, pp. 99–101.
10. Patent RF, No. 2116358. Electric furnace bath for hot-dip galvanizing. B. N. Shustov, V. V. Arsenev, B. V. Michurin, G. G. Evdokimov, V. N. Korolev, V. V. Kalegov / Applied: 03.11.1997; Published: 27.07.1997.
11. Golubtsov V. A., Ryabchikov I. V. Improvement of steel quality in wide grade range by modifying. Chernye Metally. 2015. No. 7, pp. 21–30.
12. Tursunov N. K., Semin А. Е., Sanokulov E. А. Study of dephosphoration and desulphurization processes in the smelting of 20GL steel in the induction crucible furnace with consequent ladle treatment using rare earth metals. Chernye Metally. 2017. No. 1. pp. 33–40.
13. Quirmbach P. Actual trends in the refractories industry. Chernye Metally. 2013. No. 2, pp. 59–61.
14. Abdrakhmanov R. I., Igonin А. Yu., Shaigulin I. R., Bosyakov N. А., Stepanova E. V. Increase of resistance and lowering of specific consumption of refractories in the electric steelmelting shop of Magnitogorsk Iron & Steel Works. Chernye Metally. 2013. No. 6. pp. 24–27. |
