Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

G. S. Gun, Dr. Eng., Prof., Rector Advisor, e-mail: g.gun@magtu.ru
E. M. Golubchik, Dr. Eng., Associate Prof., Dept. of Material Processing, e-mail: golubchik@magtu.ru
M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing, e-mail: m.polyakova@magtu.ru

Historic experience of Nosov Magnitogorsk State Technical University for the development of metal processing scientific research area as well as professional personnel training of all levels in the high educational system of the Russian Federation are described in the paper. It allowed the university to be included in the list of Russian superior institutions of high education. Generations of Magnitogorsk scientists who made the significant contribution for the development of the multi-roll pass rolling theory and practice, sheet rolling, and design of modern innovative materials processing methods are presented. Contribution of Magnitogorsk scientists in metallurgy for the victory over fascism is depicted. Modern achievements of Nosov Magnitogorsk State Technical University both in the development of new perspective technological solutions in metal processing and training the personnel of the highest qualification are shown. The typical peculiarity of university activity at present time is the close link of scientists with specialists of leading industrial mining and metallurgical enterprises among which the valuable segment relates to Magnitogorsk Iron and Steel Works.

1. Gun G. S. Innovative methods and solutions in matters of material processing (scientific review). Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2014. No. 4. pp. 99–113.
2. Gun G. S. The system of preparation of scientists for industrial facilities at Magnitogorsk State Technical University (MGTU). Chernye Metally. Special issue. 2011. pp. 10–13.
3. Chukin M. V., Kolokoltsev V. M., Gun G. S., Salganik V. M., Platov S. I. Scientific activity of SEU HPE “MSTU” in the conditions of development of nanotechnologies. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2009. No. 2. pp. 55–59.
4. Gun G. S. Development of the metal forming theory (scientific review). Vestnik Yuzhno-Uralskogo tekhnicheskogo universiteta. 2015. Vol. 15. No. 2. pp. 34–49.
5. Belalov Kh. N., Klekovkina N. A., Gun G. S. Korchunov A. G., Polyakova M. A. Steel wire: monograph. Magnitogorsk: Izdatelstvo Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2011. 689 p.
6. Chukin M. V., Korchunov A. G., Bakshinov V. A., Baryshnikov M. P., Gun G. S., Dolgyi D. K., Efi mova Yu. Yu., Kolokoltsev V. M., Koptseva N. V., Kuranov K. Yu., Lebedev V. N., Mezin I. Yu., Polyakova M. A., Chukin V. V. Production of high-strength steel bars for reinforced concrete sleepers of a new generation: team of authors. Edited by Chukin M. V. Moscow: Metallurgizdat, 2014. 276 p.
7. Rubin G. Sh., Vakhitova F. T., Lebedev V. N. et. al. Methodological approach to quality management of hardware products based on fuzzy sets. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2009. No. 4(28). pp. 50–53.
8. Korchunov A. G., Chukin M. V., Gun G. S., Polyakova M. A. Product quality management in hardware technology: monograph. Moscow: Izdatelsky dom Ruda i Metally, 2012. 164 p.
9. Rubin G. Sh., Chukin M. V., Gun G. S. et. al. Development of qualimetry theory for metalware products. Chernye Metally. 2012. No. 7. pp. 15–21.
10. Rubin G. Sh., Polyakova M. A., Chukin M. V., Gun G. S. Protypology: a New Stage in the Standardization of Metal Products. Steel in Translation. 2013. Vol. 43, No. 10. pp. 666–669.
11. Gun. G. S., Chukin M. V., Gun I. G. et. al. Development of qualimetry theory for metalware products. Works of the IX Congress of Rollermen. Cherepovets, 16–18 April 2013. Vol. 1. pp. 237–244.
12. Rubin G. Sh., Gun G. S., Chukin M. V., Korchunov A. G. Qualimetry in Metallurgy. Quality in production and socio-economic systems: Proceedings of the International scientific and technical conference. Kursk, 2013. pp. 185–189.
13. Rubin G. Sh., Gun G. S., Chukin M. V. et al. Development of the theory of qualimetry in the metallurgical industry. XIV International Scientific conference “New technologies and achievements in metallurgy and materials engineering. A collective monograph edited by Henryk Dyja, Anna Kawałek. Series: monographs. No 31. Częstochowa, 2013. pp. 51–55.
14. Chukin M. V., Gun G. S., Korchunov A. G., Polyakova M. A. Prospects for production of high-strength steel bars for new-generation reinforced concrete sleepers based on thermal deformation nanostructuring. Chernaya metallurgiya: Byulleten Nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2012, Iss. 4. pp. 100–105.
15. Chukin M. V., Gun G. S., Korchunov A. G., Polyakova M. A. Prospects for production of high-strength steel bars for new-generation reinforced concrete sleepers based on thermal deformation nanostructuring. A week of metals in Moscow: Collection of works of the conference. Moscow: VNIIMETMASH, 2012. pp. 79–87.
16. Chukin M. V., Gun G. S., Emaleeva D. G. Production of high-strength nanostructured bars for reinforced-concrete sleepers. XIII International Scientific conference “New technologies and achievements in metallurgy and materials engineering. A collective monograph edited by Henryk Dyja, Anna Kawalek. Series: monographs. No 24. Czestochowa, 2012. pp. 327-332.
17. Pesin A. M., Drigun E. M., Pustovojtov D. O., Lokotunina N. M., Pe sin I. A. Method for rolling parts with curvilinear surface. Patent RF. No. 2644091 B21B 1/00. Applied: 10.03.2016. Published: 07.02.2018. Bulletin No. 4.
18. Pesin A. M., Pustovoitov D. O., Lokotunina N. M. Aluminum alloys thin-sheet rolling method. Patent RF. No. 2615958 B21B 1/28. Applied: 04.02.2016. Published: 11.04.2017. Bulletin No. 11.
19. Chukin M. V., Poletskov P. P., Gushchina M. S., Berezhnaya G. A. Method of manufacture of instrumental high-strength flats. Patent RF. No. 2631063 C21D 8/02. Applied: 23.05.2016. Published: 18.09.2017. Bulletin No. 26.
20. Poletskov P. P., Gushchina M. S., Berezhnaya G. A., Alekseev D. Ju. Method for production of high-hardness wear-resistant sheet products. Patent RF. No. 2603404 C21D 8/02. Applied: 10.06.2015. Published: 27.11.2016. Bulletin No. 33.
21. Poletskov P. P., Gushchina M. S., Berezhnaya G. A., Alekseev D. Yu. Method for production of high-strength steel sheet. Patent RF. No. 2599654 C21D 8/02. Applied: 10.06.2015. Published: 10.10.2016. Bulletin No. 28.
22. Korchunov А.G. Quality management of hardware products based on fuzzy models for describing technological heredity. Metallurg. 2009. No. 5. pp. 50–53.
23. Korchunov A. G., Chukin M. V., Lysenin A. V. Methodology of developing mathematical models with fuzzy logic elements for quality indices control. Applied Mechanics and Materials. 2013. Vol. 436. pp. 374–381.
24. Korchunov, A. G., Lysenin A. V. Quality management of hardware products in the conditions of technological information uncertainty. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2012. No. 3(39). pp. 43–45.
25. Korchunov А. G. To the issue of ensuring product quality in hardware technology. Metallurg. 2008. No. 10. pp. 67–72.
26. Korchunov А. G. Improving the methodology of product quality management in the technological processes of hardware production. Proizvodstvo prokata. 2008. No. 12. pp. 8–13.
27. Golubchik E. М. Adaptive steel product quality management. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2014. No. 1(45). pp. 63–69.
28. Polyakova, M. A., Golubchik E. M. Methodology of technological adaptation applied to powder rolling. Key Engineering Materials. 2018. Vol. 779. pp. 174–180.
29. Polyakova M. A., Gulin A. E., Golubchik E. M. Alternate drawing as the way for improving mechanical properties of medium carbon steel wire. IOP Conference Series: Materials Science and Engineering. 2018. Vol. 411. 012058 paper. 6 p.
30. Polyakova M. A., Chukin M. V., Brunelli K., Efimova Yu. Yu., Golubchik E. M. Study of texture and microstructure formation in medium carbon steel wire submitted to combined deformation by drawing with bending and twisting. Materials Physics and Mechanics. 2018. No. 36. pp. 60–66.
31. Polyakova M. A., Gulin A. E., Golubchik E. M. Effect of combined tensile, bending and torsion deformation on medium carbon steel wire. 2017 International Conference on Electronic Information Technology and Computer Engineering. MATEC Web Conf. 2017. Vol. 128. 05007 paper. 1-5 pp.
32. Polyakova M. A., Gulin A. E., Efimova Yu. Yu., Golubchik E. M. Modern engineering techniques for designing materials with a specified set of properties. Key Engineering Materials. 2017. Vol. 724. pp. 77–83.
33. Golubchik E. М., Polyakova, M. A., Gulin A. E. Apparatus for producing wire with ultrafine-grain structure. Patent RF. No. 170774 В21С 1/00. Applied: 14.07.2016. Published: 10.05.2017. Bulletin No. 13.