Название |
Study of the eff ect of the 13KhFA steel microstructure on impact toughness of thick-walled seamless pipes |
Информация об авторе |
Volgograd State Technical University (Volgograd, Russia):
V. F. Petrova, Cand. Eng., Associate Prof., “Materials Technology” Dept., e-mail: val.petrova7@mail.ru A. A. Guseva, Student, “Materials Technology” Dept., e-mail: aguseva20@yandex.ru |
Реферат |
In the study of thick-walled seamless pipes, instability of toughness and heterogeneity of the microstructure and microhardness were revealed after a single hardening and after high tempering. The effect of repeated heat treatment of thick-walled oil and gas pipelines on their structure and impact strength is studied. It was revealed that double thermal treatment leads to a more uniform distribution of structural components and a decrease in grain size. More dispersed than in the initial state, the ferrite-cementite mixture with a more uniform distribution of carbon increases the stability of supercooled austenite during quenching and allows for a more uniform tempering sorbitol. The formation of a fine-grained structure provides the required toughness. |
Библиографический список |
1. Solntsev Yu. P. Cold resistant steels and alloys: tutorial for universities. Saint Petersburg: Khimizdat, 2017. 480 p. 2. Sang Y. Sh., Byoungchul H., Sunghak L. Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels. Materials Science and Engineering: A. 2007. Vol. 458. No. 1-2. pp. 281–289. 3. Chukin M. V., Poletskov P. P., Nikitenko O. A. Study of microstructure of rolled heavy plates made of low-alloyed pipe steel with increased strength and cold resistance. CIS Iron and Steel Review. 2017. Vol. 13. pp. 29–33. 4. Lewei Tong, LichaoNiu, Shuang Jing. Low temperature impact toughness of high strength structural steel. Thin-Walled Structures. 2018. Vol. 132. pp. 410–420. 5. Technical Specification 1317-006.1-593377520–2003. Seamless, oil and gas steel pipes of high operational reliability for development of OJSC TNK-BP Management fields. Introduced: 26.01.05. 6. GOST 2999–75. Metals and alloys. Vickers hardness test by diamond pyramid. Introduced: 01.07.1976. 7. GOST 5639–82. Steel and alloys. Methods for detection and determination of grain size. Introduced: 01.01.1983. 8. Sergeeva К. I. The processes for formation of the structure and complex properties of low-alloy pipe steel of high resistance: thesis of inauguration of Dissertation … of Candidate of Engineering Sciences. Yekaterinburg, 2012. 9. Chuan-you Zhang, Qing-feng Wang, Jin-li Kong. Effect of Martensite Morphology on Impact Toughness of Ultra-High Strength 25CrMo48V Steel Seamless Tube Quenched at Different Temperatures. Journal of Iron and Steel Research International. 2013. Vol. 20, Iss. 2. pp. 62–67. 10. Pyshmintsev I. Yu., Struin А. О., Kvashnin V. D., Gervasyev А. V., Petrov R. Kh. Strength and toughness properties of steel for longdistance pipelines in the direction of tube wall thickness. Chernye Metally. 2016. No. 8. pp. 36–42. 11. Regulation of grain size by thermal cycling [electronic resource]. Available at: http://metal-archive.ru/sverhmelkoe-zerno/810-regulirovanierazmera-zerna-termociklirovaniem.html (accessed: 15.01.2020). 12. Nazmul Huda, Abdelbaset R. H. Midawia, James Gianetto et al. Influence of martensite-austenite (MA) on impact toughness of X80 line pipe steels. Materials Science and Engineering: A. 2016. Vol. 266. pp. 481–491. 13. Krapivina P. А., Gervasyev А. V. The effect of heat treatment of cold rolling mills rolls on their microstructure and properties. Proceedings of the XVIII International scientific and technical Ural school-seminar of metal experts. (21–23 November 2017, Ekaterinburg). Ekaterinburg: UrFU, 2017. pp. 242–246. 14. Simochkin V. V. The effect of thermal cycling on mechanical properties of cast structural steels. Liteynoe proizvodstvo. 1986. No. 10. pp. 11–12. 15. Fedyukin V. К., Smagorinsky М. Е. Thermocyclic processing of metals and machine parts. Leningrad: Mashinostroenie, 1989. 254 p. 16. Zholdoshov B. М., Muratov V. S. Study of the fine structure of alloys during thermal cycling. Izvestiya vuzov Kyrgyzstana. 2018. No. 2. pp. 8–10. 17. Solntsev Yu. P., Andreev А. К., Grechin R. I. Mould cold-resistant steels. Moscow: Metallurgiya, 1991. 175 p. |