Journals →  Chernye Metally →  2020 →  #2

Chernye Metally


The February issue is opened by the «Steel Production and Foundry» Section. The SALCOS technology of smooth decarburization of steel, aimed at the gradual use of renewable energy sources in steel production, is presented. In the 2nd part of the article devoted to the raw material base of ferroalloys, microalloying ferroalloys are considered. Authors from Siberian University and the Chuvash State. University studied the dependence of properties of non-stick coatings on the mode of mechanical activation of graphite.

The “Rolling and other metal forming processes” section includes the 2nd part of the article on main trends in the development of rolled products, pipes and hardware, covering issues of pipe production, metal trade and standardization. Mathematical models of the stress-strain state of a metal during plastic forming of a sheet blank and welding of large diameter pipes are described, which allow to choose rational parameters for forming a pipe profile. The results of the study of the contact interaction of the strip with work rolls during continuous forming of welded pipes in the pipe electric welding line showed that the values of the pulling forces found experimentally are significantly lower than the calculated ones. Studies by authors from the Volgograd Technical University make it possible to recommend replacing a double heat refining with a double thermal cycling and tempering in order to reduce the cost and time of heat treatment while maintaining the required toughness and strength of thick-walled pipes. The publication of authors from Yekaterinburg is of practical interest: a simplified model of the process of roll briquetting of finely dispersed materials is proposed, which allows to determine the geometry parameters of the deformation zone during roll briquetting.


The Metallurgical equipment section presents a modernized version of the VDN-18 fan. Its use will reduce the labour-intensity of maintenance and repair of the fan and increase the reliability of air supply to the process equipment. A team of authors from Russia and Ukraine presents a vibrodiagnostic system for rolling production equipment, which automatically provides complete information about its technical condition, etc.


The "Personnel Policy" section is devoted to employee motivation formation.


Materials of the “From the History of Metallurgy” section are of particular interest. Research of Georgian damask weapons of the 19th century from the collection of the Mining Museum of the Mining University regarding its chemical and phase composition is presented, the carbon content in the studied samples was determined. The article is presented in color with photographs of samples of blades.


The February issue of the journal includes a color insert dedicated to the 65th anniversary of Ural Steel.


Please find more details below, or order your printed or electronic version of the Journal.

Steel making and foundry production
ArticleName SALCOS technology for smooth decarburization of steel
ArticleAuthors V. Hille, A. Redenius

Salzgitter AG (Salzgitter, Germany):

V. Hille, Dr. Eng., Dipl. Phys., Head of Corporate Technology, e-mail:


Salzgitter Mannesmann Forschung GmbH (Salzgitter, Germany):
A. Redenius, Dr. Eng., Head of Resource Effi cience and R&D Dept.

ArticleName Modeling of the valve steel production chain
ArticleAuthors H.-P. Jung, D. Leuverink, U. Grafe, M. Honig, U. Plociennik, M. Reifferscheid

Deutsche Edelstahlwerke (Siegen, Germany)

H.-P. Jung, Head of the Process Engineering and ESR
D. Leuverink, Product quality management


SMS group GmbH (Düsseldorf, Germany)

U. Grafe, Dr. Eng., Head of Materials Technology
M. Hönig, Dr. Nat. Sci., Dept. for Basics/Modeling of Continuous Casting Process
U. Plociennik, Head of Dept. for Basics/Modeling of Continuous Casting Process, e-mail:
M. Reifferscheid, Dr. Eng., Head of Development Department

ArticleName The raw material base of ferroalloys and features of development of their production in Russia. Part 2. Microalloying ferroalloys
ArticleAuthors G. Yu. Boyarko, B. N. Matveev

Tomsk Polytechnic University (Tomsk, Russia):

G. Yu. Boyarko, Dr. Eng., Prof., Natural Resources Engineering School, e-mail:


All-Russian Institute of Scientific and Technical Information RAS (Moscow, Russia):
B. N. Matveev, Dr. Eng., Prof, head of Dept. of Scientific Information on Metallurgy, e-mail:

ArticleName Study of the dependence of non-stick coatings properties on the mode of mechanical activation of graphites
ArticleAuthors T. R. Gilmanshina, I. E. Illarionov, N. S. Perfilyeva, E. N. Zhirkov

Siberian Federal University (Krasnoyarsk, Ruissia):

T. R. Gilmanshina, Cand Eng., Associate Prof., e-mail:
N. S. Perfilyeva, Cand Eng., Associate Prof.


I. N. Ulyanov Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof, Head of the Dept. “Materials science and metallurgical processes”, e-mail:
E. N. Zhirkov, Post-graduate, Dept. “Materials science and metallurgical processes”

Rolling and other Metal forming processes
ArticleName The main trends in the development of production of rolled products, pipes and hardware in 2017–2019. Part 2. Pipe production, metal trading and standardization
ArticleAuthor N. N. Gugis

“Chermet” Corporation (Moscow, Russia):

N. N. Gugis, President, e-mail:

ArticleName Modeling of the stress-strain state of a metal during plastic forming of a sheet blank and welding of large diameter pipes. Report 1
ArticleAuthors A. P. Kolikov, D. Yu. Zvonarev, M. I. Taupek

National University of Science and Technology “MISiS” (Moscow, Russia):

A. P. Kolikov, Dr. Eng., Prof., Metal Forming Dept., e-mail:


All-Russian Scientific and Research Institute of Tube Industry — RosNITI (Chelyabinsk, Russia):
D. Yu. Zvonarev, Cand. Eng., Head of Helical Rolling Lab., e-mail:


Moscow Polytechnic University (Elektrostal, Russia):
I. M. Taupek, Cand. Eng., Associate Prof., Head of Metal Forming Dept. in Elektrostal affiliate

ArticleName Study of the contact interaction of a strip with work rolls during continuous scelping of welded pipes in a TESA line
ArticleAuthors S. V. Samusev, V. A. Fadeev

National University of Science and Technology “MISiS” (Moscow, Russia):

S. V. Samusev, Dr. Eng., Prof., Metal Forming Dept.
V. A. Fadeev, Post-graduate, Metal Forming Dept., e-mail:

ArticleName Study of the eff ect of the 13KhFA steel microstructure on impact toughness of thick-walled seamless pipes
ArticleAuthors V. F. Petrova, A. A. Guseva

Volgograd State Technical University (Volgograd, Russia):

V. F. Petrova, Cand. Eng., Associate Prof., “Materials Technology” Dept., e-mail:
A. A. Guseva, Student, “Materials Technology” Dept., e-mail:

ArticleName Determination of the angle of bite during roll briquetting of finely dispersed materials
ArticleAuthors N. A. Babailov, Yu. N. Loginov, L. I. Polyanskiy

Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences (Ekaterinburg, Russia):

N. A. Babailov, Cand Eng., Senior Researcher, e-mail:


Ural Federal University (Ekaterinburg, Russia):

Yu. N. Loginov, Dr. Eng., Prof., Dept. of Metal Forming


“Spaidermash” JSC (Ekaterinburg, Russia):

L. I. Polyanskiy, General Director

Metallurgical Equipment
ArticleName Reengineering of a fan drive of the JSC Ural Steel electric steelmaking workshop
ArticleAuthors N. A. Chichenev, V. S. Shkitov

National University of Science and Technology “MISiS” (Moscow, Russia):

N. A. Chichenev, Dr. Eng., Prof., Technological Equipment Engineering Dept., e-mail:


Ural Steel (Novotroitsk, Russia):
V. S. Shkitov, Head of Mechanical Shop Section, e-mail:

ArticleName Vibrodiagnostics system for rolling mill equipment
ArticleAuthors V. Baglay, V. V. Vorobiev, A. N. Guzeev, M. M. Kipin

«Diamech-Ukraine» (Kharkov, Ukraine):

A. V. Baglay, Director
M. M. Kipin, specialist in vibration analysis of machines III, e-mail:


Kremenchuk Mykhailo Ostrohradskyi National University (Kremenchug, Ukraine):
V. V. Vorobyov, Dr. Eng., Prof., Engineering Technology Dept.


Diamech 2000 Ltd. (Moscow, Russia):
A. N. Guzeev, Chief Engineer

HR Policy
ArticleName Consistently and persistently implementing strategies
ArticleAuthor D. Kudernatsch

Kudernatsch Consalting Solutions (Strasslach, Germany):

D. Kudernatsch, Dr., Owner of a business consulting company, e-mail:

ArticleName Employee motivation is an important factor in the company`s development
ArticleAuthor M. Schwartz

Institute for Integral and Labor Practices (Esslingen near Stattgart, Germany):

M. Schwartz, Director, e-mail:

Metallurgical history
ArticleName The study of Georgian damask weapons of the XIX century from the collection of the Mining University`s Mining Museum
ArticleAuthors K. V. Tumanova, V. Yu. Bazhin, O. A. Dubovikov, A. V. Sundurov, V. G. Povarov

St. Petersburg Mining University (St. Petersburg, Russia):

K. V. Tumanova, Cand. Eng., Senior Researcher of the Mining museum, e-mail:
V. Yu. Bazhin, Dr. Eng., Prof., Vice-rector for scientific and innovation activities
O. A. Dubovikov, Dr. Eng., Prof., Chemical Technologies and Energy Processing Dept., e-mail:
A. V. Sundurov, Post-graduate, Metallurgical Dept., e-mail:
V. G. Povarov, Dr. Eng., Head of Analytical Research Dept., Center for Collective Use

Journals →  Chernye Metally →  2020 →  #2