Journals →  CIS Iron and Steel Review →  2020 →  #1 →  Back

Casting
ArticleName Choice of the optimal composition of non-stick coatings according to the conditional criterion of filling mass activation
DOI 10.17580/cisisr.2020.01.05
ArticleAuthor T. R. Gilmanshina, S. A. Khudonogov, S. I. Lytkina, N. S. Perfilyeva
ArticleAuthorData

Siberian Federal University (Krasnoyarsk, Russia):

T. R. Gilmanshina, Cand. Eng., Associate Prof., E-mail: gtr1977@mail.ru
S. A. Khudonogov, Senior Lecturer
S. I. Lytkina, Cand. Eng., Associate Prof.
N. S. Perfilyeva, Cand. Eng., Associate Prof.

 

Dr. Eng., Prof. I. E. Illarionov participated in this work.

Abstract

Development of the technique for choice of the optimal composition of non-stick coatings based on the filling mass quality evaluation (taking into account the results of differential scanning calorimetry) is the aim of this research. Non-stick coating for iron casting based on filling mass and polyvinyl butyral lacquer was taken for investigations with the following relation – filling mass : polymer composition (2% polyvinyl butyral lacquer) = 1:1. The mixture of natural and mechanically activated graphite with their different correlation was used as a filling mass. Calculation of the conditional activation criterion displayed that the most optimal relation between selfdrying coatings of natural and mechanically activated graphite in a filling mass is 50:50. It was established in this case that increase of activated graphite in a filling mass of non-stick coatings leads to increase of density, toughness and reduced strength. The most essential improvement of the properties is observed if the content of activated graphite in a filling mass increased up to 50%. Additional increase of GLS-2A graphite content does not lead to substantial improvement of the properties. The developed non-stick coatings were tested during fabrication of the casting “Centrifugal soil pump. Internal pump shell” with mass 70 kg and size 510×615×128 mm, made of 320Kh20N (320Х20Н) iron. Use of non-stick coating on the base of the mixture of natural and mechanically activated graphite (with their relation 50:50) is characterized by decrease of burning-on thickness by 1.8 times (on the bottom surface of a casting) and by 1.9 times (on the side surface of a casting) in comparison with thickness values for non-painted castings. The obtained results can be explained in the following way: if we apply the coating containing 50% GLS-2 (ГЛС-2) and 50% GLS-2A (ГЛС-2А), large particles of natural graphite don’t penetrate in mould pores and remain on the surface, what leads to decrease of burning-on on the casting surface.

keywords Graphite, conditional activation criterion, mechanical activation, thermal analysis, non-stick coatings, density, toughness, reduced strength, iron, burningon
References

1. Ovcharenko P. G., Kuzminykh E. V., Lad’yanov V. I. Interaction of a Nonstick Corundum Coating with Iron–Carbon Melts under Lost-Foam Casting Conditions. Russian Metallurgy (Metally). 2020. No. 2. pp. 115–120.
2. Sklovskiy M. I., Smolentseva N. T., Valisovskiy I. V., Romashkin V. N. Self-drying non-stick paints. Liteinoe proizvodstvo. 2001. No. 3. pp. 23–24.
3. Illarionov I. E., Strelnikov I. A., Molyakov A. A. Et al. Coldhardening metal-phosphate mixtures and non-stick coatings. Modern technologies in machine-building and casting production: Materials of the 1st International scientific-practical conference. Volgograd. Volgograd State Technical University. 2015. pp. 112–121.
4. Kemmochi K., Baer L., Hagstrom C. Metal and graphite mold and method of making a crucible. Application number: 20130025319. Type: Application. Filed: July 25, 2011. Issued: January 31, 2013. Assignee: Heraeus Shin-Etsu America, Inc.
5. Nwaogu U. C., Tiedje N. S. Foundry Coating Technology: A Review. Materials Sciences and Application. 2011. No. 2. рр. 1143–1160.
6. Kirichenko V. G. The formation of topological defects on graphite surface. East Eur. J. Phys. 2015. Vol. 2. No. 1. pp. 71–76.
7. Yu Wei., Xie Huaqing, Chen Lifei. Nanofluids [Electronic resource]. Available at: http://cdn.intechopen.com/pdfswm/35437.pdf.
8. Amelchenko V. N., Illarionov I. E., Gilmanshina T. R., Borisyuk V. A. Graphite as a prospective material for metallurgical application. CIS Iron and Steel Review. 2018. Vol. 16. pp. 29–32.
9. Illarionov I. E., Kaftannikov A. S., Nuraliev F. A., Gilmanshina T. R. Evaluation of burn value on the surface of iron castings. Chernye Metally. 2018. No. 8. pp. 23–28.
10. Leushin I. O., Grachev A. N. Development of efficient nonstick coatings based on alumoslag filling mass for casting moulds. Liteinoe proizvodstvo. 2002. No. 4. pp. 13–14.
11. Kukuy D. M., Nikolaichik Yu. A., Skvortsov V. A. Et al. Nonstick coating for manufacture steel and iron castings. Lityo i metallurgiya. 2008. No. 3(47). pp. 162–165.
12. Bataichuk A. V., Mudryi V. V. Efficiency rise for nonstick coatings of casting moulds. Lityo i metallurgiya. 2014. No. 4(77). pp. 138–143.
13. Skvortsov V. A., Shipilova I. V. Graphite-free non-stick coatings. Lityo i metallurgiya. 2006. No. 2 (38). pp. 55–57.
14. De Andrade M. J. Study of electrical properties of 2- and 3-dimensional carbon nanotubes networks. Thesis to obtain the title of Doctor in Engineering. Porto Alegre, 2010. 209 p.
15. Planetary grinding mill RETSCH РМ 400 МА [Electronic resource]. Available at: https://labreaktiv.ru/catalog/obshhelaboratornoe-oborudovanie/melnitsy/planetarnaya-sharovayamelnitsa-retsch-pm-400-ma/
16. Mamina L. I., Gilmanshina T. R., Koroleva G. A. Promising methods of graphite enrichment. Liteinoe proizvodstvo. 2003. No. 2. pp. 16–18.
17. Mamina L. I., Gilmanshina T. R., Anikina V. I. et al. Influence of the activation time on parameters of a graphite structure. Russian Journal of Non-Ferrous Metals. 2016. Vol. 57(1). pp. 52–56.
18. Gilmanshina T. R., Illarionov I. E., Lytkina S. I., Khudonogov S. A. Development of the conditional activation criterion to evaluate graphite activity. CIS Iron and Steel Review. 2019. Vol. 18. pp. 27–29.
19. Thermal analyzer SDT Q600 [Electronic resource]. Available at: http://specord.ru/termoanaliz-derivatografy/16-termoanalizator-sdt-q600

Full content Choice of the optimal composition of non-stick coatings according to the conditional criterion of filling mass activation
Back