Журналы →  CIS Iron and Steel Review →  2020 →  №1 →  Назад

Raw Materials and Mineral Processing
Название Assessment of possibility of obtaining alloying components in the process of desalting of heavy hydrocarbon raw materials. Part 1
DOI 10.17580/cisisr.2020.01.02
Автор I. Bashar, V. Yu. Bazhin, T. A. Aleksandrova, V. G. Povarov
Информация об авторе

St. Petersburg Mining University (St. Petersburg, Russia):

B. Issa, Post-graduate, Dept. of Metallurgy, e-mail: basharissashtain@gmail.com; basharissa3@gmail.com
V. Yu. Bazhin, Dr. Eng., Associate Prof., Head of the Department of Automation of Technological Processes and Production, e-mail: bazhin-alfoil@mail.ru
T. A. Aleksandrova, Cand. Eng., Leading engineer of the Quality Control Dept., e-mail: alexandrova_tatyana@mail.ru
V. G. Povarov, Dr. Chem., Head of the Dept. of Analytical Research of Core Facilities Center, e-mail: povarov_vg@pers.spmi.ru

Реферат

In the current situation of the mineral resources with a general depletion of ferrous and non-ferrous ores, it becomes necessary to search for new and alternative resources for obtaining metals and their compounds from available resources. Taking into account that ferrous and non-ferrous ores are practically lacking in some foreign countries, especially in Central Asia this problem becomes more actual. Thus, a high share of exports of ferrous and non-ferrous metals products remains due to lack of self resources, which increases the additional load on the countries, especially that suffer from wars like Syria. There is a wide range of hydrocarbon metal-containing raw materials (metal-bearing oils, oil sands, coal ash, shale, etc.) in Syrian resources, which may become an alternative source for production of ferrous and non-ferrous metals and their alloys; they also have a strategic interest for the Russian and foreign metallurgical industry. The concentration of impurities of ferrous and non-ferrous metals (such as Fe, Mn, Cr, V and Ni) in heavy crude oil is quite high, what in its turn leads to negative effects on operation of some equipment components, resulting in the need for emergency stops and downtimes of equipment and consequent repairs and technical maintenance. Development of alternative technologies for extraction of these metals at the desalination’s process of metal-bearing heavy crude oils can be characterized by interdisciplinary character, which simultaneously solves the problem of extracting ferrous and non-ferrous metal components in order to improve the properties of heavy oil as well as the oil products quality. Extraction of ferrous and heavy non-ferrous metals (iron, manganese, chromium, vanadium and nickel, copper) from the heavy metal-bearing Syrian crude oils makes a great interest, due to deteriorating economic situation in this country and lack of mineral ores. This study describes the hydrometallurgical technology based on combination of extraction-sorption processes for ferrous and non-ferrous metal extraction from heavy crude oil. The extraction is based on processing the emulsion of crude oil with aqueous solution of naphthenic acid, followed by centrifugal separation; them hydrocarbon metal-containing concentrate (acidified by HCl) is subjected to sorption process using a mixture of two Syrian natural sorbents, The following desorption process allows to recover vanadium and nickel from sorbent and to regenerate the sorbents with desorption efficiency 89.6 and 95.8% consecutively.

Ключевые слова Metal, extraction, centrifugal separation, crude oil, naphthenic acid, concentrate, hydrocarbon
Библиографический список

1. Issa B., Aleksandrova T. A. Processes of Extraction of Non-Ferrous and Precious Metals from Alternative Sources of Raw Materials. IOP Conference Series Materials Science and Engineering. 2019. Vol. 582. pp. 234–243.
2. Kuzin E. N., Kruchinina N. E. Purification of circulating and waste water in metallurgical industry using complex coagulants. CIS Iron and Steel Review. 2019. Vol. 18. pp. 72–75. DOI : 10.17580/cisisr.2019.02.15.
3. Kolokoltsev V. M., Vdovin K. N., Mayorova T. V., Ponomareva O. S. Ecological indicators in the system of non-financial reporting at industrial enterprises. CIS Iron and Steel Review. 2017. Vol. 13. pp. 4-10. DOI : 10.17580/cisisr.2017.01.01.
4. Kumolo S. T., Yulizar Y., Haerudin H., Kurniawaty I., Apriandanu D. O. B. Identification of metal porphyrins in Duri crude oil. IOP Conference Series Materials Science and Engineering, 2019. Vol. 496. pp. 1-6. DOI: 10.1088/1757-899X/496/1/012038.
5. Kondrasheva N. K., Povarov V. G., Rudko V. A. Determination of Sulfur and Trace Elements in Petroleum Coke by X-Ray Fluorescent Spectrometry. Coke and Chemistry. 2017. Vol. 60. No. 6. pp. 247–253.
6. Vzorodov S. A., Klyushnikov A. M. Development of technology for processing of copper wastes that contain precious metals. Tsvetnye metally. 2019. No. 8. pp. 90-96. DOI: 10.17580/tsm.2019.08.10.
7. Sayadova Yu. B., Chernousov P. I., Golubev O. V. Econometric modeling of secondary resources of iron. CIS Iron and Steel Review. 2019. Vol. 18. pp. 69-71. DOI: 10.17580/cisisr.2019.02.14.
8. Molchanov A. A., Ageev P. G. Implementation of new technology is a reliable method of extracting reserves remaining in hydrocarbon deposits. Zapiski gornogo instituta. 2017. Vol. 227. pp. 530–539.
9. Kondrasheva N. K., Anchita J. Effect of chemical composition and quality of heavy yarega oil on selection of appropriate Processing Technology. Zapiski gornogo instituta. 2016. Vol. 222. p. 833–838.
10. Yang Ch., Zhang G., Serhan M., Koivu G., Yang Z., Hollebone B., Lambert P., Brown C. E. Characterization of naphthenic acids in crude oils and refined petroleum products. Fuel. 2019. Vol. 255. pp. 833–838.
11. Shadrunova I. V., Gorlova O. E., Kolodezhnaya E. V. Technology for producing high-grade concentrates from waste metallurgical slags. Obogashchenie rud. 2019. Vol. 4. pp. 54–60. DOI: 10.17580/or.2019.04.10.
12. Qundan Zh., Jiliang W., Songbai T., Chunsheng Xu. Naphthenic acid distribution and transmission in acidic crude processing. Petroleum processing and petrochemicals. 2016. Vol. 12. pp. 97–102.
13. Bertheussen Ar., Simon S., Sjöblom J. Equilibrium partitioning of naphthenic acid mixture, Part 1: commercial naphthenic acid mixture. Energy & Fuels. 2018. Vol. 32. pp. 32–35. DOI: 10.1021/acs.energyfuels.8b01494.
14. Bertheussen Ar., Simon S., Sjöblom J. Equilibrium partitioning of naphthenic acid mixture Part 2: crude oil-extracted naphthenic acids: commercial naphthenic acid mixture. Energy & Fuels. 2018. Vol. 32. pp. 65–71. DOI: 10.1021/acs.energyfuels.8b01870.
15. Raez-Villanueva S., Jamshed L., Ratnayake G., Cheng L., Thomas Ph. J., Holloway A. Adverse effects of naphthenic acids on reproductive health: A focus on placental trophoblast cells. Reproductive toxicology. 2019. Vol. 90. pp. 126–133.
16. Samanipour S., Hooshyari M., Lomba J. A., Reid M., Casale M., Thomas K.V. The effect of extraction methodology on the recovery and distribution of naphthenic acids of oilfield produced water. Science of the total environment. 2019. Vol. 652. pp. 1416–1423.
17. Peng Hu, Guozhong Wu, Mucong Zi, Lei Li, Daoyi Chen. Corrigendum to “Effects of modified metal surface on the formation of methane hydrate”. Elsevier. 2019. Vol. 225. p. 263.

Полный текст статьи Assessment of possibility of obtaining alloying components in the process of desalting of heavy hydrocarbon raw materials. Part 1
Назад