Журналы →  Obogashchenie Rud →  2020 →  №3 →  Назад

Название A study on the use of pelletization in the processing of argillaceous gold-bearing ores
DOI 10.17580/or.2020.03.06
Автор Burdonov A. E., Kovalev E. V., Prokhorov K. V., Rasskazova A. V.
Информация об авторе

Irkutsk National Research Technical University (Irkutsk, Russia):

Burdonov A. E., Associate Professor, Candidate of Engineering Sciences, slimbul@inbox.ru


«Svetloye» LLC (Irkutsk, Russia):
Kovalev E. V., Process Engineer


Mining Institute of the Far Eastern Branch of the Russian Academy of Sciences (Khabarovsk, Russia):
Prokhorov K. V., Leading Researcher, Candidate of Engineering Sciences
Rasskazova A. V., Leading Researcher, Candidate of Engineering Sciences


The study covers pelletization of argillaceous gold-bearing ores from one of the deposits in the Russian Federation, as represented by three ore shoots having commercial gold concentrations. Mining of the first and second shoots has been completed; further operations at the deposit will be focused on the argillaceous ores of the third open pit, having low filtration properties. The sample analyzed refers to the oxidized and mixed types of ores and is represented by secondary quartzites, monoquartzites, mudstones, and slightly altered rocks. The rocks are limonitized; the mass fraction of sulfides, oxidized to varying degrees, is 1–3 %. The gold content is 17.3 g/t and the silver content is 7.5 g/t, as established by atomic absorption analysis. Pelletization was carried out under laboratory conditions in a batch drum agglomerator. The optimal process conditions were identified. A compression/filtration unit was developed for the ore percolation leaching experiment. Irrigation was carried out using alkaline solutions of sodium cyanide and peristaltic pumps. It was found that, during leaching, samples with the grain size of 20 and 10 mm demonstrated ore siltation, with the cyanide solution present on the surface. During the experiment using pelletized ore, no siltation or surface puddle formation was observed. Grinding to a fineness of –10 mm allowed additionally recovering 3 % of the metal, which indicates the presence of finely dispersed gold and the need for finer grinding. The recovery indicator for the pelletized sample was 12 % higher than in the basic experiment (at the fineness of –20 mm).
The work was supported by the grant from the President of the Russian Federation No. MK-1739.2020.

Ключевые слова Gold, ore, pelletization, heap leaching, percolation leaching, concentrate, tailings, recovery
Библиографический список

1. Dementyev V. E., Tatarinov А. P., Gudkov S. S. Prospects for gold recovery by heap leaching in cold climate regions of Russia. Kolyma. 2000. No. 3. pp. 33–35.
2. Dementyev V. E., Tatarinov А. P., Gudkov S. S. Main aspects of heap leaching technology for gold-containing raw materials. Gornyi Zhurnal. 2001. No. 5. pp. 53–55.
3. Webb T. The use of HDPE geomembranes in heap leach gold mines. Presented at the Workshop conference on economics and practice of heap leaching gold mining, 3–6 August, 1988, Cairns, Queensland, Australia.
4. Mokmeli M. Pre feasibility study in hydrometallurgical treatment of low-grade chalcopyrite ores from Sarcheshmeh copper mine. Hydrometallurgy. 2020. Vol. 191. DOI: 10.1016/j.hydromet.2019.105215.
5. Thenepalli T., Chilakala R., Habte L., Tuan L. Q., Kim C. S. A brief note on the heap leaching technologies for the recovery of valuable metals. Sustainability. 2019. Vol. 11 (12). DOI: 10.3390/su11123347.
6. Shesternev D. M., Myazin V. P. Gold heap leaching in the permafrost zone of Transbaikalia. Fiziko-tekhnicheskie
Problemy Razrabotki Poleznykh Iskopayemykh. 2010. No. 5. pp. 105–111.
7. Khalezov B. D., Gavrilov A. S., Petrova S. A., Mel’chakov S. Y. Investigation of solid residues obtained after oxidized nickel ore leaching. Metallurgist. 2019. Vol. 63. pp. 860–866.
8. Shi X., Chen H. Contamination and restoration of abandoned pool and heap leaching sites of rare earth mine. Zhongguo Xitu Xuebao. Journal of the Chinese Rare Earth Society. 2019. Vol. 37, Iss. 4. pp. 409–417.
9. Norov Y. D., Borovkov Y. A., Derevyashkin I. V., Yakshibaev T. M. Optimization of grain size for heap leaching of gold ore in multi-level stockpiles. Gorny Informatsionnoanaliticheskiy Byulleten'. 2019. No. 2. pp. 172–180.
10. Chekushina T. V., Vorobyev A. E., Lyashenko V. I., Tcharo Kh. Efficiency of heap leaching of metals from raw ore taking into account the influence of climatic factors. Obogashchenie Rud. 2019. No. 5. pp. 9–12. DOI: 10.17580/or.2019.05.02.
11. Mineev G. G., Vasiliev A. A., Nikitenko A. G. Heap leaching of gold ores. Vestnik Irkutskogo Gosudarstvennogo Tekhnicheskogo Universiteta. 2017. Vol. 21, No. 4. pp. 147–156.
12. Author's certificate SU 250928 A1. USSR.
13. Author's certificate SU 901313 A1. USSR.
14. Author's certificate SU 1392132 A1. USSR.
15. Guo H., Shen F.-M., Jiang X., Gao Q.-J., Ding G.-G. Effects of MgO additive on metallurgical properties of fluxedpellet. Journal of Central South University. 2019. Vol. 26, Iss. 12. pp. 3238–3251.
16. Campos T. M., Bueno G., Barrios G. K. P., Tavares L. M. Pressing iron ore concentrate in a pilot-scale HPGR. Part 1: Experimental results. Minerals Engineering. 2019. Vol. 140. DOI: 10.1016/j.mineng.2019.105875.
17. Guro V. P., Yusupov F. M., Ibragimova M. A., Rakhmatkarieva F. G. The choice of optimal binder for molybdenite concentrate granulation. Tsvetnye Metally. 2016. No. 2. pp. 68–73. DOI: 10.17580/tsm.2016.02.11.
18. Dhawan N., Rashidi S., Rajamani R. K. Population balance model for crushed ore agglomeration for heap leach operations. KONA Powder and Particle Journal. 2014. Vol. 31, Iss. 1. pp. 200–213.

Language of full-text русский
Полный текст статьи Получить