Журналы →  Obogashchenie Rud →  2020 →  №4 →  Назад

Название Complex processing of alkaline aluminosilicates by the fluorideammonium method
DOI 10.17580/or.2020.04.05
Автор Rimkevich V. S., Pushkin A. A., Girenko I. V.
Информация об авторе

Institute of Geology and Natural Management of Far Eastern Branch of RAS (Blagoveshchensk, Russia):

Rimkevich V. S., Head of Laboratory, Candidate of Geological & Mineralogical Sciences, Senior Researcher, vrimk@yandex.ru (corresponding author)
Pushkin A. A., Researcher, Candidate of Physical and Mathematical Sciences
Girenko I. V., Leading Engineer


Alkaline aluminosilicate rocks and their concentrates serve as a valuable source of raw materials for the manufacture of alumina, aluminum, and various commercial products. Pioneering studies of thermochemical ammonium-fluoride processing of nepheline concentrates of the Kola Peninsula and of the synnyrites of the Sakun massif (Chita region) have been carried out, with preliminary chemical stripping of the amorphous silica contained in the volatile ammonium hexafluorosilicate ((NH4)2SiF6). The complex processing was performed using specifically designed heat treatment, leaching, calcination and regeneration devices, made of teflon and stainless steel. The process included the following main operations: sintering of the feed material with ammonium hydrodifluoride (NH4HF2) at 50–200 °C with the holding time of 0.5 to 4.5 hours; powdered cake sublimation to produce volatile ammonium hexafluorosilicate in the temperature range of 350 to 550 °C with the holding time of 0.25 to 1 hours, with the formation of a non-volatile residue consisting of (hexafluoroaluminate ((NH4)AlF6), ammonium hexafluoroferrate ((NH4)FeF6) and other substances; pyrohydrolysis to obtain iron oxide at temperatures above 600 °C with the holding time of over three hours and its further hydrochloric acid leaching with the recovery of an iron chloride solution (FeCl3). The water-alkaline treatment of soluble fluoride-ammonium salts of silicon, aluminum, and iron chloride was carried out with the formation of amorphous silica (SiO2), aluminum hydroxide (Al(OH)3) and red iron oxide pigment (Fe2O3) in the temperature range of 25 to 90 °C, with pH = 7–9 and holding times of over one hour. The output data for the conditioned metallurgical alumina (Al2O3) and the conditions for the formation of calcium fluoride (CaF2) are presented. Additional reagents are also recovered and supplied to the respective stages of the low-waste process. As a result of the studies, an effective innovative method for processing alkaline aluminosilicates with the integrated recovery of various components was developed.

Ключевые слова Alkaline aluminosilicates, ammonium fluoride processing, effective method, complex processing, amorphous silica, alumina, useful components
Библиографический список

1. Antropova I. G., Alekseeva E. N., Budaeva A. D., Dorzhieva O. U. Thermochemical concentration of ultrapotassium aluminosilicate raw materials (synnyrite) using magnesium-containing additives of natural origin. Obogashchenie Rud. 2018. No. 6. pp. 14–19. DOI: 10.17580/or.2018.06.03.
2. Sizyakov V. M., Shmorgunenko N. S., Smirnov M. N., Dantsig S. Ya. Methods of aluminosilicate rocks complex processing for the production of alumina and other products. Nepheline raw materials. Moscow: Nauka, 1981. pp. 289–309.
3. Zakharov V. I., Kalinnikov V. T., Matveev V. A. Mayorov D. V. Chemical and technological bases and development of new directions for complex processing and use of alkaline aluminosilicates. Apatity: KSC RAS, 1995. 182 p.
4. Matveev V. A. On the prospects of using the sulfuric acid-sulfite method for complex processing of nepheline. Tsvetnye Metally. 2008. No. 9. pp. 47–50.
5. Balmaev B. G., Kirov S. S., Ivanov M. A., Pak V. I. Filtration process modeling for aluminium-bearing hydrochloric acid pulp. Tsvetnye Metally. 2017. No. 10. pp. 63–68. DOI: 10.17580/tsm.2017.10.07.
6. Matveev V. A., Mayorov D. V. Production of highpurity alumina through processing of ammonia alum extracted from nepheline. Tsvetnye Metally. 2018. No. 11. pp. 45–50. DOI: 10.17580/tsm.2018.11.06.
7. Kovzalenko V. А., Sadykov N. M.-K., Abdulvaliev R. A., Rimkevich V. S. A combination technology for high-silica raw material treatment by means of fluoride method. Obogashchenie Rud. 2015. No. 5. pp. 54–59. DOI: 10.17580/or.2015.05.09.
8. Wang W., Lu P., Han L., Zhang C., Su R., Yang C., Chen J. Diffusion behavior of ammonium group and its interaction mechanisms with intrinsic defects in fused silica. Applied Physics A: Materials Science & Processing. 2016. Vol. 122, No. 10. pp. 929–937.
9. Shimizu K., Driver G. W., Lusas M., Sparrman T., Shchukarev A., Boily J.-F. Bifluoride ([HF2]) formation at the fluoridated aluminium hydroxide/water interface. Dalton Transactions. 2016. Vol. 45, No. 22. pp. 9045–9050.
10. Rimkevich V. S., Sorokin A. P., Pushkin A. A., Girenko I. V. Integrated processing technology for calciumbearing alumosilicate raw material. Fiziko-tekhnicheskie Problemy Razrabotki Poleznykh Iskopayemykh. 2017. No. 4. pp. 165–174.
11. O'Hara M. J., Kellogg C. M., Parker C. M., Morrison S. S., Corbey J. F., Grate J. W. Decomposition of diverse solid inorganic matrices with molten ammonium bifluoride salt for constituent elemental analysis. Chemical Geology. 2017. Vol. 466. pp. 341–351.
12. Krysenko G. F., Epov D. G., Medkov M. A., Sitnik P. V., Avramenko V. A. Extraction of rare-earth elements in hydrofluoride decomposition of loparite concentrate. Zhurnal Prikladnoy Khimii. 2018. Vol. 91, Iss. 10. pp. 1473–1479.
13. Melentyev G. B., Delitsyn L. M. Nepheline is a unique mineral and chemical raw material of the XXI century: resource and environmental problems and priorities for their solution. Ekologiya Promyshlennogo Proizvodstva. 2004. No. 2. pp. 51–68.
14. Cherkasov G. N., Prusevich A. M., Sukharina A. M. Non-bauxite aluminum raw materials of Siberia. Moscow: Nedra, 1988. 167 p.
15. Stromberg A. G., Semchenko D. P. Physical chemistry. Moscow: Khimiya, 1999. 528 p.
16. Fedin A. S., Voroshilov F. A., Kantayev A. S., Ozherel'yev O. A. The research of ammonium hexafluorosilicate sublimation. Izvestiya Tomskogo Politekhnicheskogo Universiteta. Inzhiniring Georesursov. 2013. Vol. 323, No. 3. pp. 23–27.
17. Demyanova L. P., Rimkevich V. S., Buynovskiy A. S. Elaboration of nanometric amorphous silica from quartz-based minerals using the fluorination method. Journal of Fluorine Chemistry. 2011. Vol. 132, No. 12, pp. 1067–1071.
18. Arunmtha S., Karthik A., Srither S., Vinoth M., Suriyaprabha R., Manivasakan P., Rajendran V. Sizedependent physicochemical properties of mesoporous nanosilica produced from natural quartz sand using three different methods. RSC Advances. 2015. Vol. 5, No. 59. pp. 47390–47397.
19. D'yachenko A. N., Kraydenko R. I. Separation of siliconiron-copper-nickel concentrate by the fluoroammonium method into individual oxides. Izvestiya Tomskogo Politekhnicheskogo Universiteta. 2007. Vol. 311, No. 3. pp. 38–41.

Language of full-text русский
Полный текст статьи Получить