Журналы →  Obogashchenie Rud →  2020 →  №6 →  Назад

Название Mechanochemical technology for obtaining an effective filler based on gaize for cement binders
DOI 10.17580/or.2020.06.02
Автор Shoshin E. A., Strokova V. V.
Информация об авторе

Yuri Gagarin State Technical University of Saratov (Saratov, Russia):
Shoshin E. A., Associate Professor, Candidate of Engineering Sciences, shoshin234@mail.ru


Belgorod State Technological University named after V. G. Shukhov (Belgorod, Russia):
Strokova V. V., Head of Chair, Doctor of Engineering Sciences, Professor, vvstrokova@gmail.com


The article presents a study to establish the possibility of obtaining polymodal silicate dispersions (SCD) based on common natural silicacontaining raw materials (gaize) and of using such dispersions as fillers and additives for cement compositions and assesses their effectiveness. Gaize, construction quicklime, and sucrose were used as modifying carbohydrates and silica-containing raw materials for the mechanochemical synthesis. The SCD technology includes the stages of raw material dosing, combination, and wet grinding in a ball mill, separation of the solid phase of the suspension by filtration (in drum or pressure filters) and its thermolysis in a thermolysis chamber, followed by short-term dry grinding of the thermolysis products in batch or continuous mills. The results are presented for the analysis of silicate-calcium dispersions with various ratios of the initial components. The efficiency of using SCD as a component in a composite binder or a finely dispersed mineral additive in cement-sand composites is demonstrated, which introduces mechanochemical synthesis of calcium silicates as a promising technology for processing gaize into effective fillers and additives for construction purposes.
The study was carried out under the grant issued by the Russian Science Foundation (project No. 19-19-00263).

Ключевые слова Mechanochemical processing, ball mill, wet grinding, thermolysis, gaize, lime, sucrose, silicate-calcium dispersions, granulometry, composite binder activity
Библиографический список

1. Shatalov V. V. Relevance of the creation of artificial breathing atmospheres in terms of air pollution. Stroitelnye Materialy i Izdeliya. 2019. Vol. 2, No. 3. pp. 34–40.
2. Can Bostanci S., Limbachiya M., Kew H. Use of recycled aggregates for low carbon and cost effective concrete construction. Journal of Cleaner Production. 2018. Vol. 189. pp. 176–196.
3. Beppaev Z. U., Astvatsaturova L. Kh., Kolodyazhniy S. A., Vernigora S. А. Prospects for the use of recycling crushed battle of ceramic bricks as aggregates for production of concrete for general construction purpose. Vestnik NITs «Stroitelstvo». 2020. No. 1. pp. 13–22.
4. Sitorus F., Cilliers J. J., Brito-Parada P. R. Multi-criteria decision making for the choice problem in mining and mineral processing: Applications and trends. Expert Systems with Applications. 2019. Vol. 12. pp. 393–417.
5. Vaisberg L. A., Ustinov I. D. Introduction to the technology for the separation of minerals. St. Petersburg: Russkaya Kollektsiya, 2019. 168 p.
6. John V. M., Damineli B. L., Quattrone M., Pileggi R. G. Fillers in cementitious materials — Experience, recent advances and future potential. Cement and Concrete Research. 2018. Vol. 114. pp. 65–78.
7. Kalashnikov V. I., Erofeev V. T., Tarakanov O. V. The suspension-filled concrete mixtures for powder-activated concretes of new generation. Izvestiya Vysshikh Uchebnykh Zavedeniy. Stroitelstvo. 2016. No. 4. pp. 30–37.
8. Kwan A. K. H., Ling S. K. Filler technology for improving robustness and reducing cementitious paste volume of SCC. Construction and Building Materials. 2017. Vol. 153. pp. 875–885.
9. Giergiczny Z. Flyash and slag. Cement and Concrete Research. 2019. Vol. 124. 18 р. Article 105826.
10. Brykov A. S. Metakaolin. Tsement i Yego Primenenie. 2012. No. 4. pp. 36–40.
11. Bily P., Fladr J., Chylik R., Vrablik L., Hrbek V. The effect of cement replacement and homogenization procedure on concrete mechanical properties. Magazine of Civil Engineering. 2019. No. 2. pp. 46–60.
12. Di Salvo Barsi A., Marchetti G., Trezza M. A., Irassar E. F. Carbonate rocks as fillers in blended cements: Physical and mechanical properties. Construction and Building Materials. 2020. Vol. 248. Article 118697.
13. Kara K. A., Suleimanov A. G. Aerated concrete on a composite binder using screenings of crushing limestone. Vestnik Belgorodskogo Gosudarstvennogo Tekhnologicheskogo Universiteta im. V. G. Shukhova. 2013. No. 5. pp. 64–66.
14. Shukla А., Gupta N., Gupta A. Development of green concrete using waste marble dust. Materials Today: Proceedings. 2020. Vol. 26, Pt. 2. pp. 2590–2594.
15. Dvorkin L. I., Zhitkovsky V. V. High-strength finegrained concrete with the use of granite screenings. Tekhnologii Betonov. 2017. No. 5–6. pp. 21–25.
16. Cepuritis R., Jacobsen S., Smeplass S., Mørtsell E., Wigum B. J., Ng S. Influence of crushed aggregate fines with micro-proportioned particle size distributions on rheology of cement paste. Cement and Concrete Composites. 2017. Vol. 80. pp. 64–79.
17. Damineli B. L., John V. M., Lagerblad B., Pileggi R. G. Viscosity prediction of cement-filler suspensions using interference model: a route for binder efficiency enhancement. Cement and Concrete Research. 2016. Vol. 84. pp. 8–19.
18. Shoshin E. A. Silicate filler obtained by the method of thermolysis of modified cement hydrosilicates. Stroitelnye Materialy. 2017. No. 7. pp. 16–19.
19. Kochova K., Schollbach K., Gauvin F., Brouwers H. J. H. Effect of saccharides on the hydration of ordinary Portland cement. Construction and Building Materials. 2017. Vol. 15. pp. 268–275.
20. Elistratkin M. Yu., Minakov S. V., Shatalova S. V. Composite binding mineral additive influence on the plasticizer efficiency. Stroitelnye Materialy i Izdeliya. 2019. Vol. 2, No. 2. pp. 10–16.
21. Veksler M. V. Increasing the efficiency of cement compositions, the introduction of mineral fillers. Tekhnologii Betonov. 2010. No. 7–8. pp. 32–34.
22. Belyakova E. A., Moskvin R. N., Yurova V. S. Rheologically-active disperse fillers of modern cement con-crete. Obrazovanie i Nauka v Sovremennom Mire. Innovatsii. 2018. No. 4. pp. 182–188.
23. Fedyuk R. S. The properties of composite binders based on applying technogenic industrial waste in the Far East. Vestnik Grazhdanskikh Inzhenerov. 2016. No. 2. pp. 132–136.
24. Endzhievskaya I. G., Vasilovskaya N. G., Gofman O. V., Kozmin A. D., Grigoreva V. A. Fine-grained shotcreteconcrete with complex modifiers. Sistemy. Metody. Tekhnologii. 2018. No. 2. pp. 164–169.

Language of full-text русский
Полный текст статьи Получить