Журналы →  Obogashchenie Rud →  2020 →  №6 →  Назад

Название Application of mechanical activation to obtain target products in fused periclase and slags processing
DOI 10.17580/or.2020.06.06
Автор Garkavi M. S., Orekhova N. N., Gorlova O. E., Kolodezhnaya E. V.
Информация об авторе

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

Garkavi M. S., Professor, Doctor of Engineering Sciences, Professor, mgarkavi@mail.ru
Orekhova N. N., Professor, Doctor of Engineering Sciences, Professor, n_orehova @mail.ru
Gorlova O. E., Associate Professor, Candidate of Engineering Sciences, Associate Professor, gorlova_o_e@mail.ru


Institute of Problems of Integrated Development of Mineral Resources of RAS (Moscow, Russia):
Kolodezhnaya E. V., Leading Researcher, Candidate of Engineering Sciences, kev@uralomega.ru


The article presents the results for obtaining the conditioned target product from metallurgical waste, such as vanadium-containing converter slag, steelmaking slag and magnesium-containing fused periclase, by increasing their particle surface reactivity through mechanical activation at the grinding stage. The paper presents the characteristics of the feed and grinding products and the process flows for the processing of respective technogenic raw materials. The dispersion and reactivity of the finely dispersed product, established by the change in the material wetting heat, and the role of mechanical activation for the subsequent processing and improvement of the resulting product grade are evaluated. Mechanical activation of magnesium oxide powder at the last processing stage for low-grade fused periclase promotes an increase in the energy of surface-active centers of the ground material and an improvement in its electrical insulating properties (as compared with ball grinding). Mechanochemical activation of vanadium slag promotes the formation of homogeneous, well-permeable granules, intensification of redox processes during leaching and obtaining the target product (V2O5 paste) with the mass fraction of vanadium pentoxide of 84–86 %. An increase in the reactivity of the dump steelmaking slag during mechanochemical activation allows obtaining high-activity composite cements with the slag content of up to 20 wt.%.

Ключевые слова Mining and metallurgical waste, mechanical activation, grinding, centrifugal impact mill, reactivity, leaching, commercial product
Библиографический список

1. Kirsever D., Karabulut N. K., Canikoglu N., Toplan H. O. Effect of mechanical аctivation on the synthesis of a magnesium aluminate spinel. Materiali in Tehnologije. 2016. Vol. 50, No. 5. pp. 739–742.
2. Yusupov Т. S., Kazantseva L. K., Shumskaya L. G., Lygina T. Z., Tsyplakov D. S. Studies of cryptocrystalline minerals intergrowth character variations in zeolitic rocks and their dressability with mechanical activation. Obogashchenie Rud. 2014. No. 1. pp. 24–28.
3. Kumar R., Kumar S., Badjena S. K., Mehrotra S. P. Hydration of mechanically activated granulated blast furnace
slag. Metallurgical and Materials Transactions B. 2005. Vol. 36, Iss. 6. pp. 873–883.
4. Singla R., Kumar S., Alex T. C. Reactivity alteration of granulated blast furnace slag by mechanical activation for high volume usage in portland slag cement. Waste and Biomass Valorization. 2020. Vol. 11. pp. 2983–2993.
5. Escalante J. I., Gomez L. Y., Johal K. K., Mendoza G., Mancha H., Mendez J. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions. Cement and Concrete Research. 2001. Vol. 31, Iss. 10. pp. 1403–1409.
6. Kriskova L., Pontikes Y., Cizer Ö., Mertens G., Veulemans W., Geysen D., Blanpain B. Effect of mechanical activation on the hydraulic properties of stainless steel slags. Cement and Concrete Research. 2012. Vol. 42, Iss. 6. pp. 778–788.
7. Bogatyreva E. V., Ermilov A. G. Рrognostication efficiency of the preliminary mechanical activation of scheelite concentrate by X-ray analysis. Tsvetnye Metally. 2013. No. 3. pp. 60–64.
8. Xiang J., Huang Q., Lv X., Bai C. Extraction of vanadium from converter slag by two-step sulfuric acid leaching process. Journal of Cleaner Production. 2018. Vol. 170. pp. 1089–1101.
9. Prokofiev V. Yu., Gordina N. E. Processes of grinding and mechanochemical activation in the technology of oxide
ceramics (review). Steklo i Keramika. 2012. No. 2. pp. 29–34.
10. Medvedev A. S. Leaching and methods of its intensification. Мoscow: MISIS, 2005. 240 p.
11. Mucsi G. A. Review on mechanical activation and mechanical alloying in stirred media mill. Chemical Engineering Research and Design. 2019. Vol. 148. pp. 460–474.
12. Khopunov E. A. Problems of modeling of ore disintegration. Sovremennye Nauchnye Issledovaniya i Innovatsii. 2016. No. 1. pp. 102–112.
13. Fedotov K. V., Dmitriev V. I. Energy capacity and power intensity in ore desintegration processes. Vestnik Irkutskogo Gosudarstvennogo Tekhnicheskogo Universiteta. 2010. No. 2. pp. 202–205.
14. Shadrunova I. V., Gorlova O. E., Kolodezhnaya E. V. Adaptation approach to the separation of deep and complex processing of mineral raw materials as the basis of environmental management and reduction of anthropogenic impact on the environment. Gorny Informatsionno-analiticheskiy Byulleten'. 2016. No. S1. pp. 125–144.
15. Shadrunova I. V., Ozhogina E. G., Kolodezhnaya E. V., Gorlova O. E. Evaluation of metallurgical slags disintegration selectivity. Fiziko-tekhnicheskie Problemy Razrabotki Poleznykh Iskopayemykh. 2013. No. 5. pp. 180–190.
16. Sazhina M. M., Danilov N. F., Starostin A. G. Interaction between vanadium-contaning acid cakes and sodium solutions. Vestnik Permskogo Natsionalnogo Issledovatelskogo Politekhnicheskogo Universiteta. Khimicheskaya Tekhnologiya i Biotekhnologiya. 2017. No. 2. pp. 131–145.
17. Burnashev R. E., Ryabchikov M. Yu., Grebennikova V. V., Ryabchikova E. S. The study of probable approaches to controlling the centrifugal-type crushers manufactured by Ural-Omega CJSC factoring in the product quality. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G. I. Nosova. 2015. No. 1. pp. 82–89.
18. Shadrunova I. V., Gorlova O. E., Kolodezhnaya E. V. Technology for producing high-grade concentrates from waste metallurgical slags. Obogashchenie Rud. 2019. No. 4. pp. 54–60. DOI: 10.17580/or.2019.04.10.

Language of full-text русский
Полный текст статьи Получить