National University of Science and Technology MISiS, Moscow, Russia:

V. V. Morozov, Professor at the Department of Organic and Inorganic Chemistry, Doctor of Technical Sciences, e-mail: dchmggu@mail.ru

Erdenet Mining Corporation, Erdenet, Mongolia:
Khurelchuluun Ishgen, Lead Specialist in Automatic Process Control Systems at the Engineering Department, Candidate of Technical Sciences, e-mail: khurelchulun@erdenetmc.mn
Delgerbat Lodoy, Adviser, Doctor of Technical Sciences, e-mail: delgerbat@erdenetmc.mn

The developed method of visiometric analysis of particle size distribution of crushed ore uses the procedures of histogram image processing, thresholding of halftone areas, spatial image filtering, contour extraction, visualization of segmentation results, and calculation of particle size distribution histograms using the gamma function. This method allows to determine quite accurately the mass fraction of the specified sizes in crushed ore. Relationships were determined between the main output parameters of the process — i.e. the output of the final product and the screening efficiency — and the main input parameters, such as the crusher capacity, the open side setting, and the energy consumed for crushing. The obtained dependences are described by second-order multiparametric regression equations, which were used to establish the coefficients of proportionality between the deviations of the control signal (the open side setting and the throughput) and the deviations of the measured parameters (the output of the oversize product, screening efficiency, energy consumption). The developed system to control crushing and screening processes comprises scales and visiometric ore size analyzers installed on the conveyors, a meter that measures the power draw of the crusher motor, a control unit, an open side setting regulator and an ore flow regulator. The following criteria were used for optimized control of the crushing and screening processes: the screening efficiency for the –12+10 mm product and the yield of +2–10 mm size in the crushed ore. A fuzzy logic technique was used for automatic control. This technique determines the direction and the change of the controlled parameter as a function of the changing values of the measured process parameters. The results of industrial tests show that the developed optimization technique allows to obtain a crushed product of a given size (95% of the –12 mm product), increase the throughput by 5.7% and reduce the total energy consumed by the ore conditioning circuit by 2.8%.

1. Gazaleeva G. I., Tsypin E. F., Chervyakov S. A. Ore conditioning. Crushing, screening, concentration. Yekaterinburg : OAO “Uralmekhanobr”, 2014. 912 p.
2. Vaisberg L. А., Demidov I. V., Ivanov K. S. Mechanics of granular media under vibration action: the methods of description and mathematical modeling. Obogashchenie Rud. 2015. No. 4. pp. 21–31.
3. Sbárbaro D., Villar R. Advanced control and supervision of mineral processing plants. London : Springer-Verlag London Limited, 2010. 332 p.
4. Guyot O., Monredon T., LaRosa D., Broussaud A. Visiorock, an integrated vision technology for advanced control of comminution circuits. Minerals Engineering. 2012. Vol. 17. pp. 1227–1235.
5. Jayson T., Carl D., Gianni B. A machine vision approach to on-line estimation of run-of-mine ore composition on conveyor belts. Minerals Engineering. 2011. Vol. 20. pp. 1129–1144.
6. Korniienko V. I., Matsiuk S. M., Udovyk I. M. Adaptive optimal control system of ore large crushing process. Radio Electronics, Computer Science, Control. 2018. No. 1. pp. 159–165.
7. Maiti Abhik, Chakravarty Debashish, Biswas Kousik, Halder Arpan. Development of a mass model in estimating weight-wise particle size distribution using digital image processing. International Journal of Mining Science and Technology. 2017. Vol. 27. pp. 435–443.
8. Kruglov V. N., Lisienko V. G. Analyzing the industrial tests conducted for the contactless grain measurement computer system Size Indicator. Mezhdunarodnyy zhurnal eksperimentalnogo obrazovaniya. 2010. No. 1. pp. 90–94.
9. Khurlchuluun Ishgen, Morozov V. V. Investigation and optimization of a closed loop copper-molybdenum ore crushing circuit. Gornye nauki i tekhnologii. 2018. No. 4. pp. 18–24.
10. Favorskaya M. N., Jain L. C. Computer vision in advanced control systems-5: advanced decisions in technical and medical applications. Springer, 2020. 329 p.
11. Lukianitsa A. A., Shishkin A. G. Digital processing of video images. Moscow : “Ay-Es-Es Press”, 2009. 518 p.
12. Samoylova T. A., Strunin I. M. Image segmentation by marker divide method. Systemy kompyuternoy matematiki i ikh prilozheniya. 2019. No. 1. pp. 250–255.
13. Morozov V. V., Ulitenko K. Ya., Ganbaatar Z., Delgerbat L. Development and application of mineral dressing process control systems. Moscow : “Ore and Metals” Publishing House, 2013. 512 p.
14. Pelevin А. Ye. Screen separation characteristic. Obogashchenie Rud. 2011. No. 2. pp. 45–48.
15. Zhang Z., Yang J., Dou D. A surface probability model for estimation of size distribution on a conveyor belt. Physicochemical Problems of Mineral Processing. 2014. Vol. 50, Iss. 2. pp. 591–605.
16. Morozov V. V., Rapshis V. V., Delgerbat L., Khurelchuluun Ishgen. Developing the techniques of visiometric analysis of ore at the Erdenet Mining and Processing Site. Gornyy informatsionno-analiticheskiy byulleten. 2016. No. 12. pp. 279–292.
17. Suetina T. A., Kochetkov A. V., Tolmachev A. G., Li Joy, Peng Ling. Automatic control of primary crushers. Naukovedenie. 2015. Vol. 7, No. 5. pp. 2–11.