Журналы →  Eurasian mining →  2021 →  №2 →  Назад

DEVELOPMENT OF DEPOSITS
Название Scientific and technological foundations for groundwater extraction by the injection-forced self-discharge method
DOI 10.17580/em.2021.02.06
Автор Mendebaev T. N., Ismailov Kh. K., Izakov B. K., Smashov N. Zh.
Информация об авторе

Research and Implementation Center Almas, Almaty, Kazakhstan:

Mendebaev T. N., Chief Researcher, Academician, Doctor of Engineering sciences, nvc_almas@mail.ru
Smashov N. Zh., Executive Officer, Candidate of Engineering Sciences

 

Limited Liability Company “Tsentrgeolsemka”, Karaganda, Kazakhstan

Ismailov Kh. K., President of the Company
Izakov B. K., Mining Engineer

Реферат

The problem of developing underground water deposits is particularly relevant at the moment. The existing method of opening aquifers by drilling vertical wells is ineffective in terms of water yield in relation to the amount of drilling activity, material and labor costs. A system for opening and extracting underground water by the injection-forced self-discharge method is proposed, based on the use of internal energy of aquifers and the physical principles of water withdrawal (injection) and lifting to a height (hyd-ram). Structurally, the system consists of an injection and a water-lifting well connected by a smooth bend at depth and oriented towards the attitude of aquifers. The system is equipped with a cascade of a hydrojet device designed to implement the effect of injection and a hyd-ram, as well as a water return tank. The initial hydrogeological prerequisites for extracting underground water by the injectionforced self-discharge method were established, and the conditions and means of creating a system of communicating wells were determined. The design parameters of the hydro-jet device cascade and their purpose were specified. The system technical capabilities test was carried out on a test-setup designed in accordance with the research objectives and the physical principles of modeling hydraulic phenomena. A series of experiments recorded the dependence of the injection coefficient on the gravitational water yield coefficient at different working water flow rates. Information is given about the advantages of the proposed system for extracting underground water by the injection-forced self-discharge method in comparison with the traditional method of exploration and development of underground water deposits.

Ключевые слова Underground water, drilling, wells, aquifers, injection, hyd-ram, hydrojet, selfdischarge
Библиографический список

1. Mendebaev T. N., Smashov N. Zh., Kuatova M. Z. Water jet destruction of rocks in well drilling by diamond tools with independent flushing ports. Eurasian mining. 2019. No. 2. pp. 41–43. DOI: 10.17580/em.2019.02.09
2. Mendebaev T. N., Smashov N. Zh., Ismailov H. K., Izakov B. K. Development of a resourcesaving, smallsized downhole hydraulic machine for well drilling. Eastern-European journal of enterprise technologies. 2019. Vol. 6, No. 1(102). pp. 70–76.
3. Gorbunov A. K., Petrosian O. P., Ryabchenkov D. V. Ejection and injection of reagents in water treatment technology. Collection of articles of the International scientific-practical conference Breakthrough scientific research as an engine of science. Ufa : NIC Aeterna, 2018.
4. Drozdov A. N., Drozdov N. A., Gorbyleva J. A., Gorelkina E. I. The effect of mineralization of the operating fluid on the liquid-gas ejectors performance. Burenie i neft. 2019. No. 7(8). pp. 42–45.
5. Ksenz A. Ya, Kambulov S. I., Kolesnik V. V., Ridny S. D. On calculating the water-air ejector for the serial sprayer. Proceedings of Gorsky State Agrarian University. 2016. Vol. 53, No. 1. pp. 90–97.
6. Ismagilov A. R., Spiridonov E. K., Belkina O. V. Efficiency improvement of liquid jet ejector. International conference on Industrial ingeniring. Chelyabinsk : Prom-Inzhiniring, 2017.
7. Besagni G. Ejectors on the cutting edge: The past, the present and the perspective. Energy. 2019. Vol. 170. pp. 998–1003.
8. Sharma D., Patwardhan A., Ranade V. Effect of turbulent dispersion on hydrodynamic characteristics in a liquid jet ejector. Energy. 2018. Vol. 164(3). pp. 10–20.
9. Ludecke H. J., Kote B., Pauly C. Surge: causes, analysis and prevention methods. Vodosnabzhenie i sanitarnaya tekhnika. 2015. No. 8. pp. 62–69.
10. Viktorova E. P., Fashiev H. A. Hyraulic ram as a way of pumping water without using power supply. XXI International Scientific and Technical Conference of Students and Postgraduates. Moscow : Izdatelstvo MPEI. 2017. pp. 69–72.
11. Diwan P., Patel A., Sahu L. Design and fabrication of hydraulic ram with methods of improving efficiency. International Journal of Current Engineering and Scientific Research. 2016. Vol. 3, No. 4. pp. 5–13.
12. Grygo Da. Effect of the height of the delivery water on performance of water ram. Technical Sciences. 2016. No. 19(2). pp. 139–149.
13. Guo X., Li J., Yang K., Fu H., Wang T. et al. Optimal design and performance analysis of hydraulic ram pump system. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy. 2018. Vol. 232(7). pp. 1–15.

Полный текст статьи Scientific and technological foundations for groundwater extraction by the injection-forced self-discharge method
Назад