Moscow Aviation Institute (National Research University), Moscow, Russia:

S. V. Dobrovolsky, Cand. Eng., Associate Professor, Dept. of Rocket and Space Systems Operation Management, e-mail: dobrovolskiy_s@mail.ru
Yu. I. Glukhovskaya, Assistant, Dept. "HR Management"
A. S. Myakochin, Dr. Eng., Professor, Head of the Dept. of Aerospace Heat Engineering
I. V. Podporin, Cand. Eng., Leading Engineer, Dept. of Aerospace Heat Engineering

The method of obtaining anticorrosive protective coatings by a low-temperature gas-dynamic method from a powder material is a promising area of research for use in various areas of the national economy, including for restoring equipment that has used up its service life. The paper describes the deformation of a material particle upon impact with a substrate during the interaction of a heterogeneous flow with the substrate during the formation of a coating. Upon impact, the particle penetrates into the substrate, the process of deformation of the particle is accompanied by its compression and spreading over the surface. Then the defining mechanical process is the process of spreading, as a result, the formation of pores and discontinuities in the coating. In this paper, we study stainless steel coatings obtained on a sheet of cold-rolled steel 20 by a lowtemperature gas-dynamic method. The appearance of several types of corrosion occurring in the formed coating due to the presence of pores due to the use of powder materials is shown; the influence of the choice of powder material for coating on the protective properties of the resulting coating, a theoretical and practical study of the use of an additional cold pressing operation after coating formation to improve its protective and anticorrosive properties is presented, and own data on the effect of the cold pressing operation after coating formation on the porosity and corrosion properties of the coating obtained from stainless steel powder are presented. Thus, the paper substantiates a method for correcting the properties of protective coatings obtained by the low-temperature gas-dynamic method, using an additional cold rolling operation.

1. Nikitin P. V., Borisov S. А., Dobrovolskiy S. V., Glukhovskaya Yu. I. Study of the mechanism of interaction of a particle with a substrate during the impingement of a supersonic heterogeneous flow onto a flat solid wall. Poverkhnost. Rentgenovskie, sinkhronnye i neytronnye issledovaniya. 2017. No. 3. pp. 100–105.
2. Nikitin P. V., Dobrovolskiy S. V., Glukhovskaya Yu. I., Sotnik Е. V. Heterogeneous high-velocity flows in innovative technologies for the formation of protective coatings. Proceedings of the 9^th All-Russian scientific conference with international participation “Mechanics of composite materials and structures, complex and heterogeneous media”. November 19–21, 2019, Moscow. Moscow: IPRIM RAN, 2019. pp. 190–195.
3. Borisov S. А., Glukhovskaya Yu. I., Dobrovolskiy S. V., Lukerin A. V., Podporin I. V., Prokofyev М. V. Study of properties of materials obtained by the low-temperature gas-dynamic method. Proceedings of the XXVI International Symposium “Dynamic and Technological Problems of Structural Mechanics and Continuous Media”, Vol.1, Vyatichi, March 16–20, 2020. pp. 62–63.
4. Nikitin P. V. Heterogeneous flows in innovative technologies. Moscow: YaNUS-К, 2010. 245 p.
5. Kuznetsov Yu. А., Kulakov К. V., Dobychin А. V. Theoretical estimation of particle deformation in supersonic gas-dynamic spraying. Novye materialy i tekhnologii v mashinostroenii. 2010. No. 12. pp. 72–75.
6. Arkhipov V. Е., Dubravina А. V., Londarskiy А. F., Moskvitin G. V., Pugachev М. S., Khrushchyov М. М. Corrosion properties of coatings applied by gas-dynamic spraying. Korroziya: materialy, zashchita. 2014. No. 4. pp. 33–38.
7. Tarantseva К. R., Pakhomov V. S. Fizikokhimiya poverkhnosti i zashchita materialov. 2010. Vol. 46. No. 3. pp. 1–8.
8. Vasilyev V. Yu., Pustov Yu. А. Corrosion resistance and corrosion protection of metal, powder and composite materials: textbook. Moscow: MISIS, 2005. 130 p.
9. Zamaletdinov I. I. Corrosion and protection of metals. Corrosion of powder materials: textbook. Perm: Izdatelstvo Permskogo gosudarstvennogo tekhnicheskogo universiteta, 2007. 188 p.
10. Dzeneladze Zh. I. Powder metallurgy of steels and alloys. Moscow: Metallurgiya, 1978. 264 p.
11. Leisner P., Leu R. C., Moller P. Electroplating of porous PM compacts. Powder Metallurgy. 1997. Vol. 40, Iss. 3. pp. 207–210.
12. Radomyselskiy I. D., Napara-Volgina S. G., Orlova L. N., Apininskaya L. М., Grabchak А. К., Vergeles N. М. Structure, mechanical and corrosion properties of powder corrosion-resistant steel grade Kh23N18. Poroshkovaya metallurgiya. 1983. No. 1. pp. 43–49.
13. Soltis J. Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review. Corrosion Science. 2015. Vol. 90. pp. 5–22.
14. Yi Y., Cho P., Al Zaabi A., Addad Y., Jang C. Potentiodynamic polarization behaviour of AISI Type 3 stainless steel in NaCl solution. Corrosion Science. 2013. Vol. 74. pp. 92–97.
15. GOST 20018–74. Sintered hardmetals. Determination of density. Introduced: 01.01.1976.
16. GOST 25732–88. Iron and manganese ores, concentrates and pellets. Methods for determination of real, middle, bulk density and porosity. Introduced: 01.07.1990.
17. Kupriyanov G. V., Kobernichenko А. B. Some results of the experimental study of the formation of adhesive bonds in gas-dynamic coatings. Nauka i tekhnika. 2008. No 11. pp. 34–44.
18. Alkhimov А. P., Klinkov S. V., Kosarev V. F., Fomin V. М. Cold gas-dynamic spraying. Teoriya i praktika. Moscow: FIZMATLIT, 2010. 538 p.
19. Arkhipov V. Е., Balashova А. V., Londarskiy А. F., Moskvitin G. V., Pugachev М. S. Improvement of the quality of gas-dynamic coatings. Vestnik mashinostroeniya. 2012. No. 8. pp. 48–51.
20. GOST 9.905–82. Corrosion test methods. General requirements. Introduced: 01.07.1983.
21. Surface roughness (processing cleanness). Main terms and designations on drawing figures. Roughness classes. Available at: https://dpva.ru/Guide/GuideTechnologyDrawings/DrawingsSigns/sherohovatost2/.
22. Fokin М. N., Zhigalova К. А. Methods for corrosion testing of metals. Moscow: Metallurgiya, 1986. 80 p.
23. Loginov P. К., Retyunskiy О. Yu. Methods and technological processes for the restoration of worn parts. Tomsk: Tomskiy politekhnicheskiy universitet, 2010. 217 p.
24. Baboian R. Corrosion test and standards: application and interpretation, ASTM manual, series, MNL 20, Baltimore, 2005. pp. 211–220.