Journals →  Obogashchenie Rud →  2022 →  #5 →  Back

BENEFICIATION TECHNOLOGY
ArticleName Studies on the processing of natural quartz from raw material sources with different amounts of fluid inclusions
DOI 10.17580/or.2022.05.01
ArticleAuthor Savichev A. N., Krasilnikov P. A.
ArticleAuthorData

South Urals Research Center of Mineralogy and Geoecology of the Urals Branch of the Russian Academy of Sciences (Miass, Russia):
Savichev A. N., Senior Researcher, Candidate of Geological and Mineralogical Sciences, ansavichev@mail.ru


Kyshtym Mining and Processing Plant (Kyshtym, Russia):
Krasilnikov P. A., Chief Geologist

Abstract

This article presents the results of experimental processing of quartz obtained from sources of different genetic types that may potentially be used to generate high-purity quartz raw materials. A combined process was used that included: dry processing of quartz using visual sorting, crushing, screening, and magnetic separation, followed by quartz concentrate processing by flotation, wet magnetic separation, chemical milling, high-temperature calcination, and washing with deionized water. Quartz processing was monitored using inductively coupled plasma (ICP-OES) and quantitative mineralogical analyzes. The amount of fluid inclusions in the quartz was established by the light transmission coefficient in the visible region of the spectrum. The processing technology used allowed achieving a total content of impurity elements (Na, K, Li, Al, Ca, Fe, Ti, B, and P) in the quartz concentrates of 8–22 ppm. The processing did not change the amount of fluid inclusions in the quartz. The processing experiments conducted for quartz from 21 quartz deposits of different genetic types have demonstrated that the quartz concentrates obtained from six granulated quartz sources were suitable in terms of their grade characteristics for direct melting of transparent quartz glass. Additional process solutions are required for the remaining sources, aimed at reducing the amount of fluid and non-structural impurities in the quartz product. Three sources were rejected.
The study was carried out under state assignment No. 122062100023-5, with the financial support of the Russian Science Foundation and the Chelyabinsk Region within the framework of scientific project No. 22-27-20077.

keywords Quartz raw materials, processing, fluid inclusions, extra pure quartz, ICP-OES, light transmission coefficient
References

1. Musafronov V. M. Raw material base of highly pure quartz raw materials, ways of its development and strengthening. Razvedka i Okhrana Nedr. 1999. No. 3. pp. 2–4.
2. Müller A., Wanvik J. E., Ihlen P. M. Petrological and chemical characterisation of high-purity quartz deposits with examples from Norway quartz. Deposits, mineralogy and analytics. Eds. J. Götze, R. Möckel. Berlin: Springer-Verlag, 2012. pp. 71–118.
3. TU 5726-002-11496665-97. Quartz concentrates from natural quartz raw materials for fusing quartz glasses. Мoscow, 1997. 24 p.
4. URL: https://www.sibelco.com/en/materials/highpurity-quartz (accessed: 05.09.2022).
5. Aksenov E. M., Bydtaeva N. G., Bur'an Yu. I., Kolmogorov Yu. G., Nepryakhin A. E., Nigmatov I. N. Prospects for the use of quartz raw materials in Russia in high technologies. Razvedka i Okhrana Nedr. 2015. No. 9. pp. 57–66.
6. Minerallurgy of vein quartz. Ed. V. G. Kuzmin, B. N. Kravets. Мoscow: Nedra, 1990. 294 p.
7. Vertushkov G. N., Emlin E. F., Sinkevich G. A., Sokolov Yu. A., Yakushin V. I. Vein quartz of the eastern slope  of the Urals. Part 1. Research methods. Trudy Sverdlovskogo Gornogo Instituta. 1969. Iss. 58. 100 p.

8. URL: http://russianquartz.com/produktsiya/ (accessed: 05.04.2022).
9. Savichev A. N., Krasilnikov P. A. Statistical characteristics of trace elements of high purity quartz of the Uralian type (Ufaley quartz vein area, South Urals). Mineralogiya. 2019. Vol. 5, No. 1. pp. 49–57.
10. Deikun L. I., Bazurin A. Z. Technological and biotechnological methods for studying quartz raw materials. Abstracts of the VII All-Union scientific and technical conference on quartz glass. Мoscow: VNIIEMS, 1991. pp. 4–7.
11. Svetova E. N., Shanina S. N., Bubnova T. P. Development of a processing technology for low-grade vein quartz. Obogashchenie Rud. 2020. No. 3. pp. 25–30. DOI: 10.17580/or.2020.03.05.
12. Koryakina M. A. Evaluation of the possibility of using milky-white quartz from the Novotroitskoye deposit to produce high-purity quartz. Izvestiya Tomskogo Politekhnicheskogo Universiteta. Inzhiniring Georesursov. 2021. Vol. 332, No. 8. pp. 99–108.
13. Buttress A., Rodriguez J., Ure A., Ferrari R., Dodds Ch., Kingman S. Production of high purity silica by microfluidicinclusion fracture using microwave pre-treatment. Minerals Engineering. 2019. Vol. 131. pp. 407–419.
14. Götze J., Pan Y., Müller A., Kotova E. L., Cerin D. Trace element compositions and defect structures of highpurity quartz from the Southern Ural Region, Russia. Minerals. 2017. Vol. 7. DOI: 10.3390/min7100189.
15. Müller A., Ihlen P. M., Snook B., Flem B., Bingen B., Larsen R. B., Williamson B. J. The chemistry of quartz in granitic pegmatites of Southern Norway: Petrogenetic and economic implications. Economic Geology. 2015. Vol. 110, Iss. 7. pp. 1737–1757.
16. Müller A., Keyser W., Simmons W. B., Webber K., Wise M., Beurlen H., Garate-Olave I., Roda-Robles E., Galliski M. Á. Quartz chemistry of granitic pegmatites: Implications for classification, genesis and exploration. Chemical Geology. 2021. Vol. 584. DOI: 10.1016/J.CHEMGEO.2021.120507.

Language of full-text russian
Full content Buy
Back