Journals →  Obogashchenie Rud →  2022 →  #5 →  Back

SECONDARY RAW MATERIAL PROCESSING
ArticleName Specific features of nickel waste grinding in gaseous media
DOI 10.17580/or.2022.05.08
ArticleAuthor Cherkasova M. V., Kuksov M. P., Samukov A. D., Antonova V. S.
ArticleAuthorData

REC « Mekhanobr-Tekhnika» (St. Petersburg, Russia):

Cherkasova M. V., Leading Researcher, Candidate of Engineering Sciences, cherkasova_mv@mtspb.com
Kuksov M. P., Senior Researcher, Candidate of Engineering Sciences, kuksov_mp@mtspb.com
Samukov A. D., Head of Department, samykov_ad@mtspb.com

 

St. Petersburg Mining University (St. Petersburg, Russia):
Antonova V. S., Student

Abstract

Machining of metal parts generates metal waste in the amount of up to 30 % of the original product mass requiring proper disposal. The main recycling technology in the market involves briquetting, followed by remelting, which is quite energy intensive and has a number of disadvantages. This paper proposes an alternative metal waste recycling method based on mechanical grinding. The data in various studies suggest that gases may be rated as follows in terms of their effect on disintegration of metal powders: hydrogen > helium > argon > nitrogen > air. In terms of the efficiency of removing sorbed gases from metal powders, the sequence is as follows: nitrogen > hydrogen > helium > argon. The results of the study on their effects on nickel chips disintegration suggest the following order: air – nitrogen – helium – argon (for ball mill grinding) and air – helium – argon – nitrogen (for vibration mill grinding). When grinding in air, the metal is actively covered with an oxide film; this prevents the aggregation of particles, which is otherwise observed in inert media as a result of cold welding. The use of inert media in mechanical grinding helps reducing the oxygen content on the surface of particles and prevents oxidation. These materials are applicable in powder metallurgy, in particular, for additive manufacturing and for making various parts by sintering. In terms of preventing metal oxidation, we recommend using helium for high-intensity grinding and nitrogen for traditional ball grinding. It must, however, be taken into account that helium is a more expensive gas.

The authors express their gratitude to the scientific consultant of the work, Doctor of Engineering Sciences V. A. Arsentyev.
The study was carried out under the grant issued by the Russian Science Foundation (project No. 20-79-10125).

keywords Nickel waste recycling, metal powders, grinding, metal chips, gaseous medium
References

1. Oralbai T. K., Zhumasheva A. S., Namangana T. B. Methods for studying the structure and properties of powder materials. Nauka i Tekhnika Kazakhstana. 2020. No. 2. pp. 50–57.
2. DebRoy T., Wei H. L., Zuback J. S., Mukherjee T., Elmer J. W., Milewski J. O., Zhang W. Additive manufacturing of metallic components — Process, structure and properties. Progress in Materials Science. 2018. Vol. 92. pp. 112–224.
3. Chechuga A. O. Use of metal powders in additive production. Izvestiya Tulskogo Gosudarstvennogo Universiteta. Tekhnicheskie Nauki. 2021. Iss. 12. pp. 457–459.
4. Abdelhaffez G. S., Ahmed A. A., Haitham M. A. Effect of grinding media on the milling efficiency of a ball mill. Rudarskogeološko-naftni zbornik. 2022. Vol. 37, No. 2. pp. 171–177.
5. Nguyen Hiep Nguyen, Nguyen Van Minh, Nguyen Thai Ha, Do Thanh Lich. Kinetic parameters of producing nickel metal powder under isothermal conditions. Polzunovskiy Vestnik. 2020. No. 4. pp. 112–116.
6. Fullenwider B., Kiani P., Schoenung J. M., Ma K. From recycled machining waste to useful powders for metal additive manufacturing. REWAS 2019. The Minerals, Metals & Materials Series. Cham: Springer, 2019. pp. 3–7.
7. Samukov A., Cherkasova M., Kuksov M., Dmitriev S. Metal chips preparation for utilization using advanced reagents. IOP Conference Series: Earth and Environmental Science. 2021. Vol. 938. DOI: 10.1088/1755-1315/938/1/012009.
8. Korotkikh A. G., Slyusarskiy K. V., Sorokin I. V. Thermal oxidation kinetics of Al, B, AlB2 and AlB12 powders. Khimicheskaya Fizika i Mezoskopiya. 2020. Vol. 22, No. 2. pp. 164–174.
9. Panova V. O., Ternovoy Yu. F. Obtaining powders with particle shape near to spherical by water atomization of melts. Vestnik Khar'kovskogo Natsionalnogo Avtomobilno-dorozhnogo Universiteta. 2020. Vol. 1, No. 88. pp. 80–85.
10. Li H., He J., Sun Q., Wang S. Effect of the environment on the morphology of Ni powder during high-energy ball milling. Materials Today Communications. 2020. Vol. 25. DOI: 10.1016/j.mtcomm.2020.101288.
11. Sukhov D. I., Nerush S. V., Belyakov S. V., Mazalov P. B. The research of surface roughness parameters and accuracy of additive manufacturing. Izvestiya Vysshikh Uchebnykh Zavedeniy. Mashinostroyenie. 2017. No. 9. pp. 73–84.
12. Alekseev A. V., Rastegaeva G. Yu., Pakhomkina T. N. Determination of oxygen and nitrogen in nickel alloy powders. Trudy VIAM. 2018. No. 8. pp. 112–118.

Language of full-text russian
Full content Buy
Back