Журналы →  Non-ferrous Metals →  2022 →  №2 →  Назад

COMPOSITES AND MULTIPURPOSE COATINGS
Название Structure and strength of biocompatible coatings for titanium nickelide obtained in different reaction atmospheres
DOI 10.17580/nfm.2022.02.08
Автор Dubovikov K. M., Garin A. S., Shishelova A. A., Kovaleva M. A.
Информация об авторе

National Research Tomsk State University, Tomsk, Russia:

K. M. Dubovikov, Post-Graduate Student, Research Engineer, e-mail: kirill_dubovikov@mail.ru
A. S. Garin, Post-Graduate Student, Research Engineer
A. A. Shishelova, Student, Laboratory Assistant
M. A. Kovaleva, Student, Laboratory Assistant

Реферат

The three layers Ti/Ni/Ti amorphous nanolaminate was applied to the TiNi substrate by magnetron sputtering. But subsequent synthesis provided in nitrogen and argon-nitrogen-carbonium dioxide atmospheres changed their phase composition and structure. The coating synthesized in nitrogen atmosphere consists mostly of the titanium nitrides but not from titanium oxides which were formed during synthesis in argon-nitrogen-carbonium dioxide atmosphere. Despite the fact that the nitrides have great hardness the scratch tests showed the coating synthesized in argon-nitrogencarbonium dioxide atmosphere has better adhesion to the substrate. The load of 30 N is not enough for complete delamination of the coating. The results obtained with the aid of tensile tests demonstrated that the coating thickness less than 250 nm does not affect significantly on martensitic deformation of the TiNi phase.

The authors express their gratitude to the Doctor of Physical and Mathematical Sciences, Marchenko E. S., and the Candidate of Physical and Mathematical Sciences, Baigonakova G. A., NR TSU, for their assistance in writing the manuscript. “The research was conducted at the expense of the grant of the Russian Science Foundation, No. 19-72-10105, https://rscf.ru/project/19-72-10105/”.

Ключевые слова Titanium nickelide, magnetron sputtering, coating, SHS, adhesion, structure, tensile
Библиографический список

1. Kuchumov А. G., Lokhov V. А., Slovikov S. V., Wildemann V. E., Straube G. I., Sutorihin D. A. Experimental Investigation of Shape Memory Alloys Utilized in Medicine. Russian Journal of Biomechanics. 2009. Vol. 13, Iss. 3. pp. 7–19.
2. Wever D. J., Veldhuizen A. G., Sanders M. M., Schakenraad J. M., van Horn J. R. Cytotoxic, Allergic and Genotoxic Activity of a Nickel-Titanium Alloy. Biomaterials. 1997. Vol. 18, Iss. 16. pp. 1115–1120.
3. Kokorev O. V., Khodorenko V. N., Baigonakova G. A., Marchenko E. S., Yasenchuk Yu. F., Gunther V. E., Anikeev S. G., Barashkova G. A. Metal-Glass-Ceramic Phases on the Surface of Porous TiNi-Based SHS-Material for Carriers of Cells. Russian Physics Journal. 2019. Vol. 61, Iss. 9. pp. 1734–1740.
4. Witkowska J., Sowinska A., Czarnowska E., Plocinski T., Rajchel B., Tarnowski M., Wierzchon T. Structure and Properties of Composite Surface Layers Produced on NiTi Shape Memory Alloy by a Hybrid Method. Journal of Materials Science: Materials in Medicine. 2018. Vol. 29, Iss. 8. 110.
5. Olier P., Barcelo F., Béchade J., Brachet J., Lefevre E., Guenin G. Effects of Impurities Content (Oxygen, Carbon, Nitrogen) on Microstructure and Phase Transformation Tempe ratures of Near Equiatomic TiNi Shape Memory Alloys. Journal de Physique IV (Proceedings). 1997. Vol. 7, Iss. C5. pp. 143–148.
6. Potekaev A. I., Klopotov A. A., Matyunin A. N., Marchenko E. S., Gyunter V. E., Dzhalolov Sh. A. The Influence
of Phase Hardening on Premartensitic States and on Martensitic Transformation in Multicomponent Alloys Ti(Ni, Co, Mo) with Shape Memory Effects. Inorganic Materials: Applied Research. 2011. Vol. 2, Iss. 4. pp. 387–394.
7. Medical Materials and Implants with Shape Memory. In 14 vols. Vol. 1. Medical Materials with Shape Memory. Ed. by Gyunter V. E. Tomsk: NII meditsinskikh materialov i implantov s pamyatyu formy SFTI pri TGU, 2011. 533 p.
8. Mocnik P. A., Kosec T. Critical Appraisal of the Use and Properties of Nickel–Titanium Dental Alloys. Materials. 2021. Vol. 14, Iss. 24. 7859.
9. Ohtsu N., Yamasaki K., Taniho H., Konaka Y., Tate K. Pulsed Anodization of TiNi Alloy to Form a Biofunctional Ni-Free Oxide Layer for Corrosion Protection and Hydro philicity. Surface and Coatings Technology. 2021. Vol. 412. 127039.
10. Gunther V., Radkevich A., Kang S., Chekalkin T., Marchenko E., Gyunter S., Pulikov A., Sinuk I., Kaunietis S., Podgorniy V., Chang M. J., Kang J. H. Study of the Knitted TiNi Mesh Graft in a Rabbit Cranioplasty Model. Biomedical Physics & Engineering Express. 2019. Vol. 5, Iss. 2. 027005.
11. Gyunter V., Marchenko E., Chekalkin T., Baigonako va G., Kim Ji-soon, Kang Ji-hoon, Klopotov A. Study of Structural Phase Transitions in Quinary TiNi(MoFeAg)-Based Alloys. Materials Research Express. 2017. Vol. 4, Iss. 10. 105702.
12. Chang H. I., Wang Y. Cell Responses to Surface and Architecture of Tissue Engineering Scaffolds. In: Regenerative Medicine and Tissue Engineering – Cells and Biomaterials (Ed. by D. Eberli). London: IntechOpen, 2011. pp. 569–588.
13. Ponsonnet L., Reybier K., Jaffrezic N., Comte V., Lagneau C., Lissac M., Martelet C. Relationship Between Surface Properties (Roughness, Wettability) of Titanium and Titanium Alloys and Cell Behavior. Materials Science and Engineering: C. 2003. Vol. 23, Iss. 4. pp. 551–560.

14. Shanaghi A., Souri A., Saedi H., Chu P.K. Effects of the Tantalum Intermediate Layer on the Nanomechanical Properties and Biocompatibility of Nanostructured Tantalum/Tantalum Nitride Bilayer Coating Deposited By Magnetron Sputtering on the Nickel Titanium Alloy. Applied Nanoscience. 2021. Vol. 11, Iss. 6. pp. 1867–1880.
15. Motazedian F., Zhang J., Wu Z., Jiang D., Sarkar S., Martyniuk M., Yan C., Liu Y., Yang H. Achieving Ultra-Large Elastic Strains in Nb Thin Films on TiNi Phase-Transforming Substrate by the Principle of Lattice Strain Matching. Materials & Design. 2021. Vol. 197. 109257.
16. Wang X., Liu F., Song Y. Enhanced Corrosion Resistance and in vitro Bioactivity of NiTi Alloys Modified with Pydroxyapatite-Containing Al2O3 Coatings. Surface and Coatings Technology. 2018. Vol. 344. pp. 288–294.
17. Yesildal R., Karabudak F., Süküroglu E. E., Süküroglu S., Zamanlou H., Bay nd r F., Sen S., Totik Y. Differential Scanning Calorimetry (DSC) and Ni+2 Release Analysis of NiTi-Shape-Memory Dental Alloys Coated by Micro-Arc Oxidation (MAO) Method. Applied Physics A. 2018. Vol. 124. 572.
18. Mahmud A., Wu Z., Zhang J., Liu Y., Yang H. Surface Oxidation of TiNi and Its Effects on Thermal and Mechanical Properties. Intermetallics. 2018. Vol. 103. pp. 52–62.
19. Zhang K., Zhang H., Liu P., Zhang C., Li W., Chen X., Ma F. Electrophoretic Deposition of Graphene Oxide on NiTi Alloy for Corrosion Prevention. Vacuum. 2019. Vol. 161. pp. 276–282.
20. Horandghadim N., Khalil-Allaf J., Urgen M. Influence of Tantalum Pentoxide Secondary Phase on Surface Features and Mechanical Properties of Hydroxyapatite Coating on NiTi Alloy Produced by Electrophoretic Deposition. Surface & Coatings Technology. 2020. Vol. 386. 125458.
21. Rahimipour S., Salahinejad E., Sharifi E., Nosrati H., Tayebi L. Structure, Wettability, Corrosion and Biocompatibility of Nitinol Treated by Alkaline Hydrothermal and Hydrophobic Functionalization for Cardiovascular Applications. Applied Surface Science. 2020. Vol. 506. 144657.
22. Shanaghi A., Mehrjou B., Ahmadian Z., Souri A. R., Chu P. K. Enhanced Corrosion Resistance, Antibacterial Properties, and Biocompatibility by Hierarchical Hydroxyapatite/Ciprofloxacin-Calcium Phosphate Coating on Nitrided NiTi Alloy. Materials Science & Engineering: C. 2021. Vol. 118. 111524.

Полный текст статьи Structure and strength of biocompatible coatings for titanium nickelide obtained in different reaction atmospheres
Назад