ArticleName |
Production of zirconium dioxide from zircon concentrate using environmentally friendly technology |
ArticleAuthorData |
National University of Science and Technology MISiS, Moscow, Russia:
V. A. Sokolov, Professor, Doctor of Technical Sciences, e-mail: va235-sokolov@yandex.ru S. S. Kirov, Associate Professor, Candidate of Technical Sciences, e-mail: kirovss@list.ru E. V. Bogatyreva, Professor, Doctor of Technical Sciences, e-mail: helen_bogatureva@mail.ru
D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia: M. D. Gasparyan, Professor, Doctor of Technical Sciences, e-mail: migas56@yandex.ru |
Abstract |
This paper analyzes the current status of zirconium dioxide industry. In particular, the paper examines two sites: Vilnohirsk Mining and Metallurgical Works in Ukraine and Chepetsky Mechanical Plant in Russia, which produce commercially pure zirconium dioxide from zircon concentrate. The paper shows that the current commercial production of zirconium dioxide is based on zircon chlorination or zircon sintering with potassium fluosilicate, the processes that involve multiple stages and are environmentally unsafe as they generate large quantities of hazardous liquid waste. The prospective commercial production of zircon concentrate in Russia creates the need in an efficient, environmentally friendly processing technology to produce zirconium dioxide in the first place. The paper considers the outcomes of research conducted by MISiS and aimed at developing environmentally friendly processes to obtain zirconium dioxide from zircon concentrate. The authors established that a process of carbothermic decomposition of zircon by melting it in a heavyduty electric arc furnace could potentially be applied. A series of trial heats conducted with zircon-carbon burdens showed a triple reduction in silica content in the molten product. The paper also describes the results of trials that involved zircon decomposition in an electric arc furnace, gravity concentration of the molten product and production of commercial zirconium dioxide. The paper demonstrates the efficiency of using an electric arc furnace for zircon concentrate melting. The structures of molten baddeleyite-silica materials are described that were obtained in different production conditions. It is shown that, for efficient separation of baddeleyite from the glass phase, the baddeleyite crystal size should be at least 50 μm. The paper describes some potentially practicable production schemes for obtaining commercial zirconium dioxide with the maximum concentration of SiO2 not exceeding 1 %. Key research objectives have been defined aimed at setting up a pilot production of zirconium dioxide from zircon concentrate using the carbothermic process. |
References |
1. Decree No. 2914-r by the Government of the Russian Federation On the Strategy for the Development of the Mineral Resource Base of the Russian Federation till 2035, dated 22.12.2018. 2. Decree No. 2473-r by the Government of the Russian Federation On the Approval of the List of Main Strategic Types of Mineral Raw Materials, dated 30.08.2022. 3. State Report On the Status and Use of Mineral Raw Materials of the Russian Federation in 2020. Moscow, 2021. 567 p. 4. Rutman D. S., Toropov Yu. S., Pliner S. Yu. et al. Highly refractory zirconium dioxide materials. Moscow : Metallurgiya, 1985. 293 p. 5. Pilipenko N. N. Production of nuclear quality zirconium. Voprosy atomnoy nauki i tekhniki. 2008. No. 2. pp. 66–72. 6. Shikov A. D., Nikulin V. A., Arzhakova V. M. et al. Production of zirconium and zirconium alloys and parts made of it: Current status and prospects. Fizika i khimiya obrabotki materialov. 2001. No. 6. pp. 5–14. 7. Bykhovskiy L. Z., Tigunov L. P., Kalish E. A. et al. Russia’s zirconium and hafnium: Current status and prospective development and exploitation of the mineral resource base. Moscow : Izdatelstvo VIMS, 2007. 127 p. 8. Zagaynov S. V., Reynbakh O. E. Zircon: Current status and prospects of the Russian market. Social-Economic Phenomena and Processes. 2016. Vol. 11, No. 12. pp. 44–50. 9. Magayumova O. N., Looze V. V., Mineeva N. S. Zirconium as a mineral resource base of the global and Russian market. Innovative production of tangibles for government needs. International research papers. 2021. Iss. 9. pp. 120–131. 10. Sokolov V. A., Gasparyan M. D., Kirov S. S. Quality assessment of zirconium dioxide for refractories production. Novye ogneupory. 2022. No. 11. pp. 9–12. 11. Baryshnikov N. V., Geger E. V., Denisova N. D. et al. Metallurgy of zirconium and hafnium. Moscow : Metallurgiya, 1979. 208 p. 12. Fundamentals of metallurgy. Vol. 4. Rare metals. Ed. by N. S. Greyver, N. P. Sazhin, I. A. Strigin. Moscow : Metallurgiya, 1967. 651 p. 13. Sazhin N. P. The history of the USSR metallurgy of rare metals and semiconductor materials. Moscow : Ministerstvo tsvetnoy metallurgii SSSR, 1967. 136 p. 14. Zelikman A. N., Meerson G. A. Metallurgy of rare metals. Moscow : Metal lurgiya, 1973. 607 p. 15. Modifikator Research Centre. Available at: http://www.modificator.ru/news/091028_hmf.html (Accessed: 14.02.2023). 16. The practices of Verkhnedneprovsky Mining and Metallurgical Works (VDGMK) in raising the recovery of valuable components and comprehensive use of ores. Moscow : NII “Giredmet”, 1973. 91 p. 17. Vilnohirsk State Mining and Metallurgical Plant. Mineral titanium and zirconium products. 34 p. 18. Kritskiy A. A. Developing a process for comprehensive processing of zircon to produce zirconium and silicon dioxides: Candidate of Technical Sciences dissertation. Yekaterinburg, 2011. 110 p. 19. Nekhamkin L. G., Tsylov Yu. A. On environmental impact assessment of zircon processing circuits. Tsvetnye Metally. 1989. No. 9. pp. 81–83. 20. Thorpe M. L. Wieks Ph. H. Electric-arc furnace turns zircon sand to zirconia. Chemical Engineering. 1971. Vol. 15. pp. 117–119. 21. Wong Ai., McPherson R. The structure of plasma dissociated zircon. Journal of Materials Science. 1981. Vol. 16. pp. 1732–1735. 22. Funahashi T., Ueda K., Uchimura R., Oguchi Y. High-purity zirconia powder from zircon by carbothermic reduction under reduced pressure. Kawasaki Steel Report. 1988. No. 18. pp. 73–80. 23. Sokolov V. A., Gorbanenko M. A., Lisafin A. B., Gasparyan M. D. Selecting a melting unit for making molten zirconium dioxide. Novye ogneupory. 2020. No. 12. pp. 3–9. 24. Sokolov V. A. Zircon decomposition as a result of electric arc melting. Tsvetnye Metally. 2006. No. 7. pp. 59–63. 25. Sokolov A. N., Ashimov U. B., Bolotov A. V. et al. Molten refractory oxides. Moscow : Metallurgiya, 1988. 232 p. 26. Sokolov V. A., Bogatyreva E. V. Use of eco-friendly processes to produce zirconium dioxide from zircon concentrate. Rare Metals and Materials on Their Basis: Technology, Properties, Application: Conference proceedings. 2021. Moscow, Giredmet, 8–10 December. pp. 126–127. 27. Popov O. N., Rybalkin P. P., Sokolov V. A. et al. Production and application of molten cast refractories. Moscow : Metallurgiya, 1985. 256 p. 28. Poletaev I. F., Krasnenkova L. V., Smurova T. V. Production of zirconium dioxide for molten cast refractories and abrasives. Tsvetnye Metally. 1988. No. 12. pp. 56–58. 29. Belyavskaya V. V., Nekhamkin L. G., Safronov E. K. Obtaining primary materials for the production of Bacor refractories by partial loosening of zircon with calcium carbonate. Research papers. Vol. 126. Moscow : Izdatelstvo Giredmeta, 1976. pp. 106–108. 30. GOST 5100–85. Technical soda ash. Specifications. Introduced: 01.01.1986. |