Journals →  Obogashchenie Rud →  2023 →  #2 →  Back

SECONDARY RAW MATERIAL PROCESSING
ArticleName Specific features in the processing of phosphogypsum to obtain an inorganic dye
DOI 10.17580/or.2023.02.04
ArticleAuthor Shabelskaya N. P., Medennikov O. A., Khliyan Z. D., Ulyanova V. A.
ArticleAuthorData

Platov South-Russian State Polytechnic University (NPI) (Novocherkassk, Russia):

Shabelskaya N. P., Head of Chair, Doctor of Engineering Sciences, Associate Professor, nina_shabelskaya@mail.ru
Medennikov O. A., Postgraduate Student
Khliyan Z. D., Postgraduate Student
Ulyanova V. A., Student

Abstract

This paper presents the results of a comprehensive study on the possibility of processing the large-tonnage phosphogypsum waste generated in the manufacture of orthophosphoric acid to obtain an inorganic luminescent material. The main process parameters for the thermal reduction of phosphogypsum into the target product are analyzed. It is shown that heat treatment in the presence of a reducing agent generates a composite material containing a phase of anhydrous calcium sulfate and calcium sulfide and is accompanied by partial destruction of the structure; the boundaries of lamellar crystals become less clear and clusters of reduced material form on their surface; when heat-treated in the presence of a number of reducing agents, such as activated carbon, vegetable oil, citric acid, starch, and sucrose, phosphogypsum becomes luminescent due to the presence of calcium sulfide. The luminescence is observed under ultraviolet irradiation; the samples emit light in the yellow-orange part of the spectrum. The luminescence of the material changes with variations in the processing methods. The best process conditions include heat treatment temperatures of 800–900 °C, the treatment time of 60 minutes, and the amount of reducing agent introduced at 7–14 wt%. Sucrose in the amount of 7 wt% was the most effective reducing agent under the conditions studied. It has been suggested that the relatively low luminosity of the samples obtained using coal as a reducing agent may be due to the kinetics of the reduction process as the process is solid-phase in the case of coal and involves a liquid phase of oxygen-containing reducing agents at elevated temperatures. The research conducted opens up wide possibilities for the comprehensive use of mineral raw materials with the manufacture of a high-demand inorganic product.

keywords Phosphogypsum, luminescent materials, inorganic dye, waste recycling, calcium sulfide, calcium sulfate, phosphogypsum processing
References

1. Abdulvaliev R. A., Gladyshev S. V., Kenzhaliev B. K., Imangalieva L. A. Complex processing of the iron-bearing fraction of bauxites with the manufacture of bloomery iron. Obogashchenie Rud. 2020. No. 2. pp. 41–45. DOI: 10.17580/or.2020.02.07
2. Rimkevich V. S., Pushkin A. A., Girenko I. V. Complex processing of alkaline aluminosilicates by the fluorideammonium method. Obogashchenie Rud. 2020. No. 4. pp. 27–34. DOI: 10.17580/or.2020.04.05
3. Lokshin E. P., Tareeva O. A., Sedneva T. A., Elizarova I. R. Method of phosphoric acid production by sorption conversion of apatite concetrate in presence of sulphocationite in sodium or potassium forms. ChemChemTech. 2020. Vol. 63, No. 1. pp. 78–85.
4. Chernyi S. A. Secondary resources of rare еarth мetals. Ekologiya i Promyshlennost' Rossii. 2020. Vol. 24, No. 9. pp. 44–50.
5. Golovneva V. V., Kulemina A. E., Pochitalkina I. A., Shubabko O. E. Modern sectors of phosphogypsum recycling. Uspekhi v Khimii i Khimicheskoy Tekhnologii. 2020. Vol. 34, No. 4. pp. 65–67.
6. Petropavlovskaya V. B., Zavadko M. Yu., Novichenkova T. B., Petropavlovskii K. S., Buryanov A. F. Design of compositions of gypsum raw mixtures modified with additives of man-made origin on the basis of local raw material base. Khimiya, Fizika i Mekhanika Materialov. 2022. No. 1. pp. 76–90.
7. Likhosherst A. E., Pochitalkina I. A., Filenko I. A. Extraction of rare earth elements from phosphate raw. Uspekhi v Khimii i Khimicheskoy Tekhnologii. 2022. Vol. 36, No. 4. pp. 46–48.
8. Adinaev Kh. A., Shamadinova N. A., Atakuziev T. A., Yusupova N. F. Experimental and industrial testing to obtain and study the properties of activated monomineral white cement. Khimicheskaya Promyshlennost'. 2019. Vol. 96, No. 1. pp. 26–29.
9. Temirov U. S. Organomineral fertilizers based on cattle manure and phosphogypsum. Journal of Advances in Engineering Technology. 2020. Vol. 1. pp. 75–81. (In Uzbek)
10. Zverkov M. S., Komissarov M. A., Ogura Sh.-I. Erosion control by application of soil conditioners: Scientific review. Ekologiya i Stroitelstvo. 2020. No. 2. pp. 41–48.
11. Wang Y., Wang Z., Wei G., Yang Y., He S., Li J., Shi Y., Li R., Zhang J., Li P. Highly efficient and stable near-infrared broadband garnet phosphor for multifunctional phosphorconverted light-emitting diodes. Advanced Optical Materials. 2022. Vol. 10, Iss. 11. DOI: 10.1002/adom.202200415
12. Wang H., Chen M., Mou Y., Lei Z., Wang Q., Peng Y. Enhanced color quality of phosphor-converted white laser diodes through bicolor phosphor-in-glass. IEEE Transactions on Electron Devices. 2021. Vol. 68, Iss. 11. pp. 5652–5655.
13. Rubalajyothi P., Rajendran A. Thermoluminescence charcteristics studies of phosphor material with anti-bacterial activity. Journal of Critical Reviews. 2020. Vol. 7, Iss. 1. pp. 538–545.
14. Lahariya V., Dhoble S. J. Development and advancement of undoped and doped zinc sulfide for phosphor application. Displays. 2022. Vol. 74. DOI: 10.1016/j.displa.2022.102186
15. Wang X., He J., Qiu Z., Zhou W., Lian S., Mi Q., Xu J., Ai S., Liu Y. CaS:Eu2+@CaZnOS:Mn2+: A dual-UV/green-excited and dual-red-emitting spectral conversion with all-weather resistance. Ceramics International. 2020. Vol. 46, Iss. 7. pp. 9734–9740.
16. Rosa J., Lahtinen J., Julin J., Sun Z., Lipsanen H. Tuning of emission wavelength of CaS:Eu by addition of oxygen using atomic layer deposition. Materials. 2021. Vol. 14, Iss. 20. DOI: 10.3390/ma14205966
17. Arai M., Fujimoto Y., Koshimizu M., Kawamura I., Nakauchi D., Yanagida T., Asai K. Development of rare earth doped CaS phosphors for radiation detection. Journal of the Ceramic Society of Japan. 2020. Vol. 128, Iss. 8. pp. 523–531.
18. Tong X. B., Yang J. X., Wu P. P., Zhang X. M., Seo Y. J. Color tunable emission from CaS:Cu+, Mn2+ rare-earth-free phosphors prepared by a simple carbon-thermal reduction method. Journal of Alloys and Compounds. 2018. Vol. 779. pp. 399–403.
19. Sharma R., Bhatti H. S., Kyhm K. Enhanced transition probabilities and trapping state emission of quencher impurities doped CaS:Mn phosphors. Journal of Optoelectronics and Advanced Materials. 2009. Vol. 11, Iss. 1. pp. 62–69.
20. Shabelskaya N. P., Medvedev R. P. Obtaining a luminescent inorganic dye from phosphogypsum. Obogashchenie Rud. 2019. No. 5. pp. 36–40. DOI: 10.17580/or.2019.05.07
21. Fedotov P. K., Senchenko A. E., Fedotov K. V., Burdonov A. E. Influence of the ore reduction method on the percolation leaching efficiency. Obogashchenie Rud. 2021. No. 2. pp. 15–20. DOI: 10.17580/or.2021.02.03

Language of full-text russian
Full content Buy
Back