Научный центр геомеханики и проблем горного производства, Санкт-Петербургский горный университет, Санкт-Петербург, Россия:

Сучилин А. В., главный инженер проектов
Андреев А. А., ведущий инженер, andreev_aa@pers.spmi.ru
Васильев Д. А., ведущий инженер

Заполярный филиал ПАО «ГМК «Норильский никель», Норильск, Россия:
Раков И. В., руководитель проектного офиса

В работе принимал участие сотрудник ЗФ ПАО «ГМК «Норильский никель» В. Н. Лебедев.

Выполнен сравнительный анализ применяемой в настоящее время технологии отбойки буровзрывным способом с альтернативным механическим способом с использованием комбайнов на шахте «Ангидрит». Установлено, что существующая технология добычи полезного ископаемого является оптимальной по ряду технологических и экономических показателей.

1. Marysyuk V. P., Darbinyan T. P., Andreev A. A., Noskov V. A. Efficiency of modification of the copper–nickel sulfide ore mining system in the Oktyabrsky mine. Gornyi Zhurnal. 2019. No. 11. pp. 19–23. DOI: 10.17580/gzh.2019.11.02
2. Kuranov A. Mining sector advance : Digital technologies and mineral mining. 2021. Available at: https://habr.com/ru/companies/ds/articles/564250/ (accessed: 15.04.2022).
3. Darbinyan T. P., Lozitsky V. A., Gogolev D. V., Balandin V. V. Backfill improvement in underground mines of NorNickel’s Polar Division: Current situation and prospects. Gornyi Zhurnal. 2022. No. 1. pp. 80–84. DOI: 10.17580/gzh.2022.01.14
4. Bondarenko S. A., Trofimov B . Ya. Physicochemical processes of manmade anhydrate binder curing. Current Challenges in Construction : The 65^th All-Russian Conference Proceedings. Novosibirsk, 2008.
5. Golik V. I., Dmitrak Yu. V., Komashchenko V. I., Kachurin N. M. Management of hardening mixtures properties when stowing mining sites of ore deposits. Journal of Mining Institute. 2020. Vol. 243. pp. 285–292.
6. Akhmadeev Yu. G., Lebed O . B., Van-Chan V. Yu., Ilin V. B. History of development and increase of mineral assets in the Norilsk Industrial Area. Gornyi Zhurnal. 2020. No. 6. pp. 5–9.
7. Kovalskiy E. R., Gromtsev K. V., Petrov D. N. Modeling deformation of rib pillars during backfill. GIAB. 2020. No. 9. pp. 87–101.
8. Sidorenko A. A., Meshkov S. A. Justification of technologie s parameters for intensive mining of prone to spontaneous combustion thick coal seams. GIAB. 2022. No. 6-1. pp. 83–99.
9. Fomin S. I., Lelen A. N. Substantiation of the operational block parameters during the development of cement raw mat erial deposits by mining combines of layer-wise milling. Ratsionalnoe osvoenie nedr. 2022. No. 3(65). pp. 20–25.
10. Small mining sites—Innovation in exploitation and processing. Dubrovnik International ESEE Mining School–DIM ESEE 2020. Croatia, 2020.
11. Bondarenko A. A., Sharipov R. Kh. Experience and comparative analysis of operating efficiency of diesel and electric loading and delivery machines. Izvestiya Tulskogo gosudarstvennogo universiteta. Nauki o Zemle. 2021. No. 4. pp. 246–257.
12. Grafe B., Shepel T., Drebenstedt C. Innovations in mechanical rock excavation at TU Bergakademie Freiberg. Scientific and Practical Studies of Raw Material Issues : Proceedings of the Russian–German Raw Materials Dialogue : A Collection of Young Scientists Papers and Discussion. Leiden : CRC Press/Balkema, 2019. pp. 34–45.
13. Burt C. N., Caccetta L. Equipment Selection for Mining: With Case Studies. Cham : Springer International Publishing, 2018. 155 р.
14. Komlenovich D. Multi-criterion approach to selection of mining equipment. Gornoe delo. 2017. No. 2(12). pp. 10–19.
15. Shabarov A., Kuranov A., Popov A., Tsirel S. Geodynamic risks of mining in highly stressed rock mass. Problems in Geomechanics of Highly Compressed Rock and Rock Massifs : Proceedings of the 1st International Scientific Conference. E3S Web of Conferences. 2019. Vol. 129. 01011. DOI: 10.1051/e3sconf/201912901011
16. Yakubovskiy M. M., Mikhaylova E. A., Bazhukov A. A. Reasons of efficiency of surface miners in selective coal cutting under low temperatures. GIAB. 2021. No. 10. pp. 42–57.
17. Shishlyannikov D. I., Trifanov M. G., Trifanov G. D. “Ural-20R ” combines loading drives evaluation in two-stage development of the face. Journal of Mining Institute. 2020. Vol. 242. pp. 234–241.
18. Kholmskiy A. V., Fomin S. I. The prospect s of blastless ore breaking with hydraulic hammers when mining North Uralian Bauxite mine deposits by underground method. Izvestiya vuzov. Gornyi zhurnal. 2022. No. 4. pp. 26–37.
19. Dimitraki L. S., Christaras B. G., Arampelos N. D. Investigation of blasti ng impact on limestone of varying quality using FEA. Geomechanics and Engineering. 2021. Vol. 25, No. 2. pp. 111–121.
20. Sinegubov V. Yu., Popov M. G., Vilner M. A., Sotnikov R. O. Influence of stoping on formation of damaged rock zones at boundaries of large cross-section excavations in apatite–nepheline mining. Gornyi Zhurnal. 2021. No. 8. pp. 26–30. DOI: 10.17580/gzh.2021.08.04
21. Uvarov I. I., Garaev I. F., Lozitskiy V. A., Andreev V. N. Self-propelled electric traction mining equipment. Gornyi Zhurnal. 2022. No. 8. pp. 11–16.
22. Kurchin G. S., Ananenko K. E., Prokopev I. V., Kirsanov A. K. Methodical b ases for normalization of losses and impoverishment during production with the account of their impact on technological data during treatment. Marksheyderiya i nedro polzovanie. 2017. No. 6(92). pp. 55–59.
23. Fomin S. I., Rodionov A. O. Determination of mineral losses taking into account the angle of inclination of an ore body and the type of mining equipment used. Marksheyderiya i nedropolzovanie. 2020. No. 3(107). pp. 48–50.
24. Nguyen V. S., Nguyen K. L., Lykov Yu. V. Increasing the yield of coarse coal fractions in shearing. Gornyi Zhurnal. 2021. No. 2. pp. 97–100. DOI: 10.17580/gzh.2021.02.13
25. Rostamsowlat I., Richard T., Evans B. An experimental study of the effect of back rake angle in rock cutting. International Journal of Rock Mechanics and Mining Sciences. 2018. Vol. 107. pp. 224–232.
26. Verbilo P. E., Vilner M. A. Study of the jointed rock mass uniaxial compre ssion strength anisotropy and scale effect. GIAB. 2022. No. 6-2. pp. 47–59.
27. Zuev B. Yu., Zubov V. P., Smychnik A. D. Determination of static and dynamic stresses in physical models of layered and block rock masses. Gornyi Zhurnal. 2019. No. 7. pp. 61–66. DOI: 10.17580/gzh.2019.07.02
28. Zhabin A. B., Polyakov A. V., Averin E. A., Linnik Yu. N., Linnik V. Yu. Estimation of abrasiveness impact on the parameters of rock-cutting equipment. Journal of Mining Institute. 2019. Vol. 240. pp. 621–627.
29. Gendler S. G., Tumanov M. V., Levin L. Yu. Principles for selecting, training and maintaining skills for safe work of personnel for mining industry enterprises. Nauchnyi vestnik Natsionalnogo gornogo universiteta. 2021. No. 2. pp. 156–162.
30. Gendler S. G., Rudakov M. L., Falova E. S. Analysis of the risk structure of injuries and occupational diseases in the mining industry of the Far North of the Russian Federation. Nauchnyi vestnik Natsionalnogo gornogo universiteta. 2020. No. 3. pp. 81–85.
31. Morozov K. V. Creation of rock mass monitoring deformations systems on rock burst hazardous mineral deposits. Rock Mechanics for Natural Resources and Infrastructure Development—Full Papers : Proceedings of the 14^th International Congress on Rock Mechanics and Rock Engineering. Leiden : CRC Press/Balkema, 2020. Vol. 6. pp. 1318–1323.
32. Morozov K. V., Demekhin D. N., Bakhtin E. V. Multicomponent strain gauges for assessing the stress-strain state of a rock mass. GIAB. 2022. No. 6-2. pp. 80–97.
33. Whittle G., Stange W., Hans on N. Optimising Project Value and Robustness. Project Evaluation : Conference Proceedings. Melbourne, 2007.
34. Borisovich V. T., Kurbanov N. Kh., Zaernyuk V. M., Seifullaev B. M. Practical risk management at gold mining companies. Gornyi Zhurnal. 2018. No. 11. pp. 70–75. DOI: 10.17580/gzh.2018.11.13
35. Tsirel S. V., Noskov V. A., Korchak P. A., Zhukova S. A. Evaluation of economic efficiency of rock mass geodynamics prediction and control. Gornyi Zhurnal. 2017. No. 3. pp. 26–31. DOI: 10.17580/gzh.2017.03.05