Журналы →  Gornyi Zhurnal →  2023 →  №8 →  Назад

KOLA MINING & METALLURGICAL COMPANY
Название Improvement of blasting technology with emulsion explosives in Severny Mine, Kola GMK
DOI 10.17580/gzh.2023.08.01
Автор Kozyrev S. A., Safonov N. V., Matveenko V. A.
Информация об авторе

Mining Institute, Kola Science Center, Russian Academy of Sciences, Apatity, Russia:

S. A. Kozyrev, Head of Laboratory, Doctor of Engineering Sciences

 

Mineral Mining and Processing Management, Kola GMK, Zapolyarny, Russia:

N. V. Safonov, Head of Mining Department, SafonovNV@kolagmk.ru
V. A. Matveenko, Head of Geological Information System and Mining Planning Department

Реферат

Severny Mine is a main mineral mining division of Kola Mining and Metallurgical Company (Kola GMK), located in the Pechenga district of the Murmansk Region. This division includes Severny, Severny-Gluboky and Kaula-Kotselvaara mines. Mining operations use different extraction systems. Development of Zhdanovskoe and Zapolyarnoe deposits is carried out using three systems of mining: caving with single-end ore drawing, sublevel caving with room-and-pillar, and room-and-pillar. At Kotselvaara-Kammikivi and Semiletka deposits, blasting in sublevel drifts and sublevel caving are in use. The largest output (up to 90 %) is produced by the systems of sublevel caving with single-end ore drawing using powerful self-propelling machinery. The main factors which influence ore fragmentation quality at Severeny-Gluboky Mine, Kola GMK are described. The blasting-induced damage in the form of cracks, indents and cascading in boreholes is revealed. The detonation and energy parameters of an emulsion explosive being used are determined on a full scale and on a testing site. On this basis, the actual explosive properties of different explosives are calculated, and the rational blasting parameters are found for boreholes with a diameter of 89 and 102 mm. For the rhomb-shaped extraction panels adopted in the mine, the patterns of drilling, charging and blasting are proposed with regard to the specified rates of drilling-and-blasting. It is shown that for the integrity of boreholes and their reduced deviation from the design variants, the vertical drilling pattern is preferable. This pattern ensures high drawing performance and better rock fragmentation quality.

Ключевые слова Mining system, borehole blasting, explosive, drilling-and-blasting parameters, detonation velocity, charging density, blasting-induced seismic effect
Библиографический список

1. Freidin A. M., Neverov A. A., Neverov S. A., Filippov P. A. Modern methods of development of the ore deposits with gash on the deep levels. Novosibirsk : Izdatelstvo SO RAN, 2008. 150 p.
2. Rusin E. P., Stazhevsky S. B. Swedish version of sublevel caving ore mining system: State-of-the-art and prospects. InterExpo Geo-Sibir. 2017. Vol. 2, No. 2. pp. 112–116.
3. Savich I. N., Mustafin V. I. Perspectives of use and rationale design solutions of block (level) and sublevel face draw. GIAB. 2015. Special issue 1. Proceedings of International Scientific Symposium Miner’s Week-2015. pp. 419–429.
4. Bashkov V. I., Kopytov A. I. Calculation of parameters and constructive design options of developing sublevel caving with mechanical release of ore. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta. 2015. No. 2(108). pp. 75–77.
5. Petrov D. N., Neobutov G. P. Experience and prospects of sublevel caving mining of ore deposits in Yakutia. GIAB. 2017. Special issue 24. Problems of Geomechanics and Geotechnology in Mineral Mining in the North. pp. 211–219.
6. Pepelev R. G., Nesterov Yu. I. Optimization of parameters of sublevel ore drawing with diamond shape. Marksheyderiya i nedropolzovanie. 2018. No. 5(97). pp. 38–41.
7. Kozyrev S. A. Zvonar A. Yu. Increase of efficiency and safety for explosive breaking in the underground mines of the Khibiny deposits when using emulsive explosives. Vzryvnoe delo. 2011. No. 106/63. pp. 72–91.
8. Lovitt M. Evolution of Sub Level Caving – Safety Improvement through Technology. The AusIMM Bulletin. 2016. April. pp. 82–85.
9. Lapčević V., Torbica S. Numerical Investigation of Caved Rock Mass Friction and Fragmentation Change Influence on Gravity Flow Formation in Sublevel Caving. Minerals. 2017. Vol. 7, Iss. 4. 56. DOI: 10.3390/min7040056
10. Mohanty B., Zwaan D., Malek F. Diagnostics of Production Blasts in a Deep Underground Mine. Engineering and Mining Journal. 2013. Vol. 214, No. 8. pp. 52–57.
11. Wimmer M., Nordqvist A., Righetti E., Petropoulos N., Thurley M. Analysis of Rock Fragmentation and its Effect on Gravity Flow at the Kiruna Sublevel Caving Mine. Proceedings of the 11th International Symposium on Rock Fragmentation by Blasting. Sydney, 2015. pp. 775–792.
12. Shekhar G., Gustafson A., Boeg-Jensen P., Malmgren L., Schunnesson H. Draw control strategies in sublevel caving mines – A baseline mapping of LKAB’s Malmberget and Kiirunavaara mines. The Journal of the Southern African Institute of Mining and Metallurgy. 2018. Vol. 118. pp. 723–733.
13. Nordqvist A., Wimmer М. Holistic Approach to Study Gravity Flow at the Kiruna Sublevel Caving Mine. Proceedings of the 17th International Conference & Exhibition on Mass Mining. Sydney, 2016. pp. 401–414.
14. Artemev E. P., Tryastsin A. V. Validation of optimal delay intervals for bulk blasting in open pit mines. Izvestiya vuzov. Gornyi zhurnal. 2013. No. 2. pp. 84–87.
15. Ermolaev A. I., Tokmakov V. V., Teterev N. A., Shtrek A. S. Rock breakage mechanisms under shortdelay blasting and delay interval calculation. Innovation Mining Technologies for Metalliferous and Nonmetalliferous Deposits : III International Conference Proceedings. Yekaterinburg, 2014. pp. 75–79.
16. Kushnerov P. I., Shumskiy A. I. Optimal delay intervals between neighbor holes in shortdelay blasting. Vzryvnoe delo. 2008. No. 99/56. pp. 69–79.
17. Kozyrev S. A., Kamyansky V. N., Alenichev I. A. Estimation of interaction borehole charges at different delay time between them. Vzryvnoe delo. 2017. No. 117/74. pp. 60–75.
18. Qinghua Lei, Ke Gao. A numerical study of stress variability in heterogeneous fractured rocks. International Journal of Rock Mechanics and Mining Sciences. 2019. Vol. 113. pp. 121–133.
19. Li-Yun Yang, Chen-Xi Ding. Fracture mechanism due to blast-imposed loading under high static stress conditions. International Journal of Rock Mechanics and Mining Sciences. 2018. Vol. 107. pp. 150–158.
20. Zuev B. Yu. Methodology of modeling nonlinear geomechanical processes in blocky and layered rock masses on models made of equivalent materials. Journal of Mining Institute. 2021. Vol. 250. pp. 542–552.
21. Trofimov A. V., Kirkin A. P., Rumyantsev A. E., Yavarov A. V. Use of numerical modelling to determine optimum overcoring parameters in rock stress-strain state analysis. Tsvetnye Metally. 2020. No. 12. pp. 22–27.
22. Kulkova M. S., Zemtsovsky A. V. Optimizing parameters of stopes and pillars for the Zhdanov deposit mining. Eurasian Mining. 2019. No. 1. pp. 13–15.
23. Kaizong Xia, Congxin Chen, Yangyang Deng, Guofeng Xiao, Yun Zheng et al. In situ monitoring and analysis of the mining-induced deep ground movement in a metal mine. International Journal of Rock Mechanics and Mining Sciences. 2018. Vol. 109. pp. 32–51.
24. Trushko V. L., Protosenya A. G. Prospects of geomechanics development in the context of new technological paradigm. Journal of Mining Institute. 2019. Vol. 236. pp. 162–166.

Language of full-text русский
Полный текст статьи Получить
Назад