Journals →  Obogashchenie Rud →  2023 →  #4 →  Back

BENEFICIATION PROCESSES
ArticleName Prospects for improving copper ore flotation performance using a modified reagent
DOI 10.17580/or.2023.04.03
ArticleAuthor Semushkina L. V., Abdykirova G. Zh., Turysbekov D. K., Narbekova S. М.
ArticleAuthorData

JSC Institute of Metallurgy and Ore Bebefication, Satbayev University (Almaty, Kazakhstan):

Semushkina L. V., Leading Researcher, Candidate of Engineering Sciences, syomushkina.lara@mail.ru
Abdykirova G. Zh., Leading Researcher, Candidate of Engineering Sciences, abdgul@mail.ru
Turysbekov D. K., Leading Researcher, Candidate of Engineering Sciences, dula80@mail.ru
Narbekova S. М., Researcher, s.narbekova@mail.ru

Abstract

Special attention in improving reagent usage regimes and flotation reagent selectivity is paid to the development of modified collectors based on xanthates, dithiophosphates, and dithiocarbamates, as these lower the total collector consumption and ensure higher collecting capacity. This work covers the studies on the potential use of a modified reagent in flotation processing of non-ferrous metal ores. The studies were conducted using copper ore samples from a deposit in Kazakhstan. According to the chemical assay data, the sample contained 0.45 wt% of copper. In order to improve metal recovery into the concentrate, the basic collector of sodium butyl xanthate was replaced in the rougher and scavenger copper flotation stages with a modified reagent, a dispersed 1 : 1 mixture of sodium butyl xanthate and thionocarbamate. With an optimal dispersion time of 1 minute, 99.5 % of the emulsion droplets reached a particle size of less than 1.6 μm. It has been shown that a dispersed modified flotation reagent emulsion interacts more effectively with the surfaces of sulfide copper minerals. A contact angle study using a chalcopyrite section has shown that the reagent mix has the highest adsorption on chalcopyrite, as compared with butyl xanthate and thionocarbamate. Flotation with the basic collector yielded a copper concentrate with a copper grade of 21.5 wt% and recovery of 83.3 %; the use of a modified collector allowed improving copper recovery into the copper concentrate by 5.1 % and isolating a copper concentrate with a copper grade of 21.8 wt% and a recovery of 88.4 %.
The research was carried out with the financial support of the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan under grants No. AR08855565 and No. AR09259372.

keywords Processing, flotation, ore, recovery, modified reagent, dispersion, concentrate.
References

1. Аhmadi A., Rezaei M., Sadeghieh S. M. Interaction effects of flotation reagents for SAG mill reject of copper sulphide ore using response surface methodology. Transactions of Nonferrous Metals Society of China. 2021. Vol. 31, No. 3. pp. 792–806.
2. Boteroad Y. L., Serna-Guerrerob R., López-Valdiviesoc A., Benzaazouad M., Cisternasa L. A. New insights related to the flotation of covellite in porphyry ores. Minerals Engineering. 2021. Vol. 174, Iss. 1. DOI: 10.1016/j.mineng.2021.107242
3. Zou S., Wang Sh., Ma X., Zhong H. Underlying synergistic collection mechanism of an emerging mixed reagent
scheme in chalcopyrite flotation. Journal of Molecular Liquids. 2022. Vol. 364. DOI: 10.1016/j.molliq.2022.119948
4. Chen Y., Truong V. N. T., Bu X., Xie G. A review of effects and applications of ultrasound in mineral flotation. Ultrasonics Sonochemistry. 2020. Vol. 60. DOI: 10.1016/j.ultsonch.2019.104739
5. Xiea H., Liua Y., Raoa B., Wua J., Gaoa L., Chena L., Tianb X. Selective passivation behavior of galena surface by sulfuric acid and a novel flotation separation method for copper-lead sulfide ore without collector and inhibitor. Separation and Purification Technology. 2021. Vol. 267. DOI: 10.1016/j.seppur.2021.118621
6. Chanturia V. A., Nedosekina T. V. Features of the effect of dimethyldithiocarbamate on the flotation properties of copper sulfides. Tsvetnye Metally. 2006. No. 1. pp. 4–6.
7. Chanturia V. A., Nedosekina T. V. The mechanism of action of dimethyldithiocarbamate during flotation of pyrrhotite with xanthogenate. Tsvetnye Metally. 2004. No. 10. pp. 25–27.
8. Chanturia V. A., Nedosekina T. V., Panina Yu. S. Physical and technical problems of mineral development. Tsvetnye Metally. 2005. No. 1. pp. 91–95.
9. Peng J., Sun W., Han H., Ou L., Chen J., Luo Y. Adsorption of a new reagent scheme on chalcopyrite and molybdenite surfaces causing an efficiency flotation separation: Insights from first-principles calculations. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2022. Vol. 654, Iss. 5. DOI: 10.1016/j.colsurfa.2022.130092
10. Xu H., Ye T., Zhang X., Lu L., Xiong W., Zhu Y. Insights into the adsorption mechanism of N-thiourea-maleamic acid on chalcopyrite surface in the flotation separation of Cu-Mo sulfide ores. Journal of Molecular Liquids. 2022. Vol. 350. DOI: 10.1016/j.molliq.2022.118554
11. Ignatkina V. A., Aksenova D. D., Kayumov A. A., Ergesheva N. D. Hydrogen peroxide in reagent regimes in copper sulphide ore flotation. Journal of Mining Science. 2022. Vol. 58. pp. 123–134.
12. Sherembaeva R. T., Omarova N. K., Akimbekova B. B., Katkeeva G. L. Usage of new flotation agent «P» during sulfide copper ores flotation. Tsvetnye Metally. 2014. No. 6. pp. 12–16.
13. Gizatullina D. R., Akubaeva M. A., Zhunussov A. M., Makasheva A. M. About the use of R-66 reagent in the technology of flotation enrichment of mixed copper. Metalurgija. 2023. Vol. 62, Iss. 3–4. pp. 451–454.
14. Yessengaziyev A., Mukhanova A., Tussupbayev N., Barmenshinova M. The usage of basic and ultramicroheterogenic flotation reagents in the processing of technogenic copper-containing raw materials. Journal of Chemical Technology and Metallurgy. 2022. Vol. 57, Iss. 6. pp. 1235–1242.
15. Ignatkina V. A., Makavetskas A. R., Kayumov A. А., Aksenova D. D. Causes of degradation of production data in flotation of copper-bearing sulfide ore extracted from cupriferous pyrite deposit by open stoping. Gornyi Informatsionno-analiticheskiy Byulleten′. 2021. No. 9. pp. 5–22.
16. Zhao G., Peng J., Zhong H., Wang Sh., Liu G. Synthesis of novel ether thionocarbamates and study on their flotation performance for chalcopyrite. Minerals. 2016. Vol. 6. DOI: 10.3390/min6030097
17. Liu S., Liu G. Y., Huang Y. G., Zhong H. Hydrophobic intensification flotation: Comparison of collector containing two minerophilic groups with conventional collectors. Transactions of Nonferrous Metals Society of China. 2020. Vol. 30, No. 9. pp. 2536–2546.
18. Maree W., Kloppers L., Hangone G., Oyekola O. The effects of mixtures of potassium amyl xanthate (PAX) and isopropyl ethyl thionocarbamate (IPETC) collectors on grade and recovery in the froth flotation of a nickel sulfide ore South African. Journal of Chemical Engineering. 2017. Vol. 24. pp. 116–121.
19. Semushkina L. V., Tusupbaev N. K., Turysbekov D. K., Narbekova S. М. Prospects for the processing of technogenic gold-bearing raw materials using a microemulsion of a composite flotation reagent. Obogashchenie Rud. 2021. No. 5. pp. 40–45.
20. Semushkina L. V., Abdykirova G. Zh., Turysbekov D. K., Narbekova S. M., Kaldybayeva Zh. A. On the possibility to processing of copper-molybdenum ore using a combined flotation reagent. Kompleksnoye Ispolzovanie Mineralnogo Syrya. 2021. No. 4. pp. 57–64.
21. Semushkina L. V., Tusupbayev N. K., Turysbekov D. K., Narbekova S. M., Kaldybayeva Zh. A. Flotation processing of copper-containing technogenic raw materials using a composite flotation reagent. Kompleksnoye Ispolzovanie Mineralnogo Syrya. 2023. No. 1. pp. 34–42.

Language of full-text russian
Full content Buy
Back