Journals →  CIS Iron and Steel Review →  2023 →  #2 →  Back

Rolling
ArticleName Experience of putting into practice and development prospects of digital twins in section rolling technological systems
DOI 10.17580/cisisr.2023.02.10
ArticleAuthor S. A. Levandovskiy, A. B. Moller, O. N. Tulupov, N. A. Baranov.
ArticleAuthorData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia)

S. A. Levandovskiy, Cand. Eng., Associate Prof., Dept. of Metal Processing Technologies, e-mail: levandovskiy@mail.ru
A. B. Moller, Dr. Eng., Prof., Head of Dept. of Metal Processing Technologies, e-mail: amoller@mail.ru
O. N. Tulupov, Dr. Eng., Prof., Vice-Rector for Research and Innovations
N. A. Baranov, Post-Graduate, Dept. of Metal Processing Technologies

Abstract

The authors consider the problem of creation, development and putting into practice digital twins for technological processes. Use of digital technologies in metallurgy allows to cut the expenses of manufacturing process, to improve quality of metal products and to widen their grade and dimension ranges. The leadership of Magnitogorsk Iron and Steel Works (MMK) formulates the ambitious aim to create a digital twin for a full-scale technological site, with consequent distribution of a digital platform to the whole enterprise. As soon as production stage is the main part of each metallurgical company, providing receiving of the required profit, stage-by-stage achievement of the formulated goal is starting from the industrial component. Step-by-step process of creation of a digital twin is considered for the section rolling mill 170 at Magnitogorsk Iron and Steel Works. This technological process is also combined and can be presented as separate conditional blocks, such as metal heating, rolling and cooling. Based on the positive result of the successfully realized project of the digital twin for the air cooling lines, it was decided to use this practice to the whole technology of manufacture of section products at MMK 170 rolling mill. The main aims and tasks for the examined project are formulated, it will allow to obtain the first Russian experience of creation of the full-scale digital twin of an industrial object. The features of operation of up-to-date digital twins are considered and the functional restrictions are defined. Structural scheme of the created complex dynamic mathematical model was designed as the base for operation of the ready solution. Expected industrial effects were formed in narrow cooperation with MMK specialists. Taking into account the technical and technological risks, the restrictions for implementation of the digital twin are determined: operation in the advising conditions, use of the complete data spectrum about the object for full-range possibility of digital copy simulation, industrial testing in the real operating conditions of the rolling mill until achievement of preset authenticity. When considering the prospects of creation of similar solutions for other technological objects (rolling mills or other technological stages), up-to-date features of their further development and integration within the company range are revealed. They testify that created digital twin can be a universal testing field, promoting appearance of domestic integration platform for digital twins. Import substitution in this industry is critically important for Russia, because there no such technical solutions at the national market.

keywords Section rolling production, section mill, digital twin of the technological process, modeling of the technological process, section rolling technological system, industry 4.0, digitalization
References

1. Schwab K. The Fourth Industrial Revolution. World Economic Forum. 2016. p. 172.
2. Lu Y., Xu X. Resource virtualization: A core technology for developing cyber-physical production systems. Journal of Manufacturing Systems. 2018. Vol. 47. pp. 128–140.
3. Tarasov I. V. Industry 4.0: comprehension, concept, development tendencies. Strategii biznesa. 2018. No. 6 (50).
4. Tsarev M. V., Andreev Yu. S. Digital twins in the industry: development history, classification, technologies, application scenarios. Priborostroenie. 2023. No. 7.
5. Romanova O. A., Sirotin D. V. Digitalization of production processes in metallurgy: tendencies and measuring methods. Izvestiya UGGU. 2021. No. 3 (63).
6. Weyer S., Meyer T., Ohmer M., Gorecky D., Zuhke D. Future modeling and simulation of CPS-based factories: An example from the automotive industry. IFAC PapersOnLine. 2016. Vol. 49. No. 31. pp. 97-102. DOI: 10.1016/j.ifacol.2016.12.168
7. Vachalek J., Bartalsky L., Rovny O., Sismisova D., Morhac M., Loksik M. The digital twin of an industrial production line within the industry 4.0 concept. Proc. of the 21st Intern. Conf. Process Control, Strbske Pleso, Slovakia. 2017. pp. 258-262. DOI: 10.1109/PC.2017.7976223
8. Grieves M., Vickers J. Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems. In book: Transdisciplinary Perspectives on Complex Systems. Cham: Springer, 2017. pp. 85-113. DOI: 10.1007/978-3-319-38756-7_4
9. Tulupov O. N., Moller A. B., Sarancha S. Y. Increasing of long products rolling efficiency: modernization of Stelmor air cooling line to obtain sorbitized wire rod. Solid State Phenomena. 2017. Vol. 265 SSP. pp. 1116-1122.
10. Moller A. B., Tulupov O. N., Levandovskiy S. A., Nazarov D. A. Providing steel with an approximate application of the mechanical properties of wire rod 5.5-6.5 mm from steel grades 70-75 based on a conventional twin of the Stelmor process. CIS Iron and Steel Review. 2022. Vol. 23. pp. 28-32.
11. Abdullin V. V., Shnayder D. A., Khasanov A. R., Tselikanov D. F. IIoT-Based Approach to Industrial Equipment Condition Monitoring: Wireless Technology and Use Cases. Proceedings - 2020 Global Smart Industry Conference, GloSIC 2020. 2020. pp. 399–406. 9267842.
12. Wollschlaeger M., Sauter T., Jasperneite J. The Future of Industrial Communication: Automation Networks in the Era of the Internet of Things and Industry 4.0. Institute of Electrical and Electronics Engineers Industrial Electronics Magazine. 2017. No. 11. pp. 17–27.
13. Sarancha S. Y., Levandovskii S. A., Moller A. B., Kinzin D. I., Tulupov O. N. Cost-saving reconstruction of the air-cooling line in a small-bar mill. Steel in Translation. 2017. Vol. 47 (5). pp. 334-338.
14. Gorbanev A. A., Kolosov B. N., Evteev E. A. et al. The new technology of two-stage cooling of rolled products on mill 150 after reconstruction. Stal. 1997. No. 10. pp. 56–59.
15. Filippov V. V., Tishchenko V. A., Zhuchkov S. M. et al. Reconstruction of a small-grade wire mill of the Belarusian Metallurgical Plant and quality improvement of wire rod from high-carbon steels. Proizvodstvo prokata. 2002. No. 7. pp. 20–26.
16. Gorbanev A. A., Filippov V. V., Zhuchkov S. M. et al. Increasing the uniformity of cooling of the wire rod coils on the roller conveyor of a modern wire mill. Metallurgicheskaya i gornorudnaya promyshlennost. 2002. No. 3. pp. 44–47.
17. Evteev E. A., Klekovkin A. A., Podolskii B. G. Reconstruction of section for air cooling of wire rod in the 150 mill. Steel in Translation. 2010. Vol. 40 (3). pp. 273–276.
18. Schroeder G. et al. Visualizing the digital twin using web services and augmented reality. Proc. 14th IEEE Intern. Conf. Ind. Informat, Poitiers, France. 2016. pp. 522-527. DOI: 10.1109/INDIN.2016.7819217
19. Havard V., Jeanne B., Lacomblez M., Baudry D. Digital twin and virtual reality: a co-simulation environment for design and assessment of industrial workstation. Production & Manufactuging Research. 2019. Vol. 7:1. pp. 472-489. DOI: 10.1080/21693277.2019.1660283

Full content Experience of putting into practice and development prospects of digital twins in section rolling technological systems
Back