Journals →  Gornyi Zhurnal →  2023 →  #12 →  Back

EQUIPMENT AND MATERIALS
ArticleName Influence of working fluid on operating efficiency of hydraulic systems of open pit mining machines
DOI 10.17580/gzh.2023.12.14
ArticleAuthor Abduazizov N. A., Raikhanova G. E., Vinogradov A. V., Zhuraev A. Sh.
ArticleAuthorData

Navoi State University of Mining and Technologies, Navoi, Republic of Uzbekistan

N. A. Abduazizov, Vice-Principal of Education, Doctor of Engineering Sciences

A. Sh. Zhuraev, Acting Associate Professor, Candidate of Engineering Sciences

 

NUST MISIS, Division in Almalyk, Almalyk, Republic of Uzbekistan
G. E. Raikhanova, Deputy Director, Candidate of Engineering Sciences, galiya82@inbox.ru

 

Moscow State Technological University, Moscow, Russia
A. V. Vinogradov, Deputy Director of Center for Automated Machine Building Supervision

Abstract

Mining enterprises of the Republic of Uzbekistan pay great attention to the improvement of quality indicators of the main excavation and loading equipment operation. The growing depth of open pit mining in difficult geological conditions and the increased requirements for reliability and efficiency of excavators lead to the expansion of application fields of hydraulic machines and to the increase of their capacity. Modern hydraulic excavators are the expensive high-tech equipment, and their operation and maintenance require strict adherence to technical regulations and specialized training of personnel. Efficiency of an excavator depends on many factors and largely on technical state of its hydraulic system. When hydraulic excavators operate in difficult climatic conditions, the number of failures of hydraulic equipment increases, and therefore issues connected with reducing the operating cost of hydraulic systems of mining excavators and with their trouble-free operation are highly relevant. Reliability and efficiency of hydraulic system components depends greatly on the purity of the hydraulic fluid used. The decrease in the service life of assemblies and parts of the hydraulic system of a hydraulic excavator occurs due to the following reasons: high concentration of solid mechanical impurities, which leads to adhesion, abrasion and erosion damage; high concentration of liquid impurities, including water and bitumen, which causes corrosion and siltation; excess concentration of air (gas), which conditions cavitation erosion. The article presents the research results on the impact exerted by the concentration of working fluid impurities on the service life of the hydraulic system of excavators. The graphical pattern of durability of hydraulic systems with respect to the level of contamination is plotted; the composition of hydraulic fluids is analyzed in terms of dust and contaminating elements, and their impact on the system is assessed; the dependence of contamination of the working fluid of the hydraulic system on the time of its use is proposed to predict the degree of contamination and to determine the optimum level of contamination of the hydraulic system.

keywords Hydraulic system, hydraulic excavator, reliability, efficiency, purity, fluid contamination, parts corrosion, abrasiveness
References

1. Zhuravlev A. Sh. Improvement of operating efficiency of hydraulic excavators in open pit mines through hydraulics upgrading : Dissertation of Candidate of Engineering Sciences. Navoi, 2021.
2. Abduazizov N. A. Methods to improve efficiency of hydraulic excavators in open pit mines through optimization of hydraulics : Dissertation of Doctor of Engineering Sciences. Almalyk, 2020. 200 p.
3. Abduazizov N. A., Muzaffarov A., Toshow J. B., Juraev R. U., Zhuraev A. Sh. A complex of methods for analyzing the working fluid of a hydrostatic power plant for hydraulic mining machines. International Journal of Advanced Science and Technology. 2020. Vol. 29, No. 5s. pp. 852–855.
4. Poderni R. Y., Koelsh H. R. Adaptation of hydraulic shovels for Arctic temperature of jakutia Region. Mine Planning and Equipment Selection : Proceedings of the 19th International Symposium. Fremantle, 2010. pp. 749–802.
5. Slesarev B. V. Substantiation of parameters and development of means to enhance efficiency of hydraulic excavators in open pit mines : Theses of Dissertation of Candidate of Engineering Sciences. Moscow, 2005. 24 p.
6. Slesarev B. V., Shteyntsayg V. M., Dautov R. R., Brodskiy G. S. Improvement of operating efficiency of heavy-duty hydraulic excavators in open pit mines in Yakutia. Kimberlite Mining—Present-Day Situation and Prospects : Proceedings of International Conference Mirny–2001. Moscow : Ruda i Metally, 2002. pp. 93–97.
7. Abduazizov N. A., Zhuraev A. Sh. The contemporary state and prospects of development of power equipment of mining machine. Advanced Engineering Science. 2022. Vol. 54, Iss. 2.
8. Bules P. A. Reliability of hydraulic excavators in open pit mining in Russia : Dissertation of Candidate of Engineering Sciences. Moscow, 2016. 163 p.
9. Krivenko A. E., Zhang Kuok Khanh. Influence of power fluid temperature in hydraulics on operating efficiency of hydraulic mining excavators. Gornyi Zhurnal. 2020. No. 12. pp. 78–81.
10. Hidayat H., Aviva D., Muis A., Halik A., Sudarsono S. et al. Failure analysis of excavator hydraulic pump. IOP Conference Series: Materials Science and Engineering. 2022. Vol. 1212. 012052. DOI: 10.1088/1757-899X/1212/1/012052
11. Lukashuk O. A., Komissarov A. P., Letnev K. Y. Increasing power efficiency of open-pit excavators. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709, No. 2. 022083. DOI: 10.1088/1757-899X/709/2/022083
12. Doroshenko V. A. Positive-displacement pneumatic and hydraulic drives : Tutorial. Yekaterinburg : Izdatelstvo Uralskogo universiteta, 2019. 196 p.
13. Goldbukh A. E. Analysis and choice of optimal parameters for hydrostatic loading units of rotary–plunger hydraulic motors of mining machines : Theses of Dissertation of Candidate of Engineering Sciences. Moscow, 1971. 15 p.
14. Abramov S. V., Perlov A. S. et al. Analytical calculation of kinematic and force parameters for working mechanisms of hydraulic excavators. Stroitelnye i dorozhnye mashiny. 1971. No. 1. pp. 3–8.
15. Mizhibrada I. Efficiency evaluation model of maintenance and repair control for single-bucket hydraulic excavators for open pit mines : Theses of Dissertation of Candidate of Engineering Sciences. Moscow, 2018. 20 p.
16. Giang Quoc Khanh, Krivenko A. E., Pudov E. Yu., Kuzin E. G. Performance evaluation model for power fluid cooling system of hydraulic excavators. Gornyi Zhurnal. 2021. No. 12. pp. 64–69.
17. Kujundžić T., Klanfar M., Korman T., Briševac Z. Influence of crushed rock properties on the productivity of a hydraulic excavator. Applied Sciences. 2021. Vol. 11, Iss. 5. DOI: 10.3390/app11052345

Language of full-text russian
Full content Buy
Back