Journals →  Gornyi Zhurnal →  2024 →  #5 →  Back

PROCESSING AND COMPLEX USAGE OF MINERAL RAW MATERIALS
ArticleName Potential increase in volumes of magnetite– apatite ore processing
DOI 10.17580/gzh.2024.05.05
ArticleAuthor Opalev A. S., Alekseeva S. A., Barmin I. S., Smirnova N. A.
ArticleAuthorData

Mining Institute, Kola Science Center, Russian Academy of Sciences, Apatity, Russia

A. S. Opalev, Deputy Director of Science, Candidate of Engineering Sciences
S. A. Alekseeva, Senior Researcher, s.alekseeva@ksc.ru

 

EuroChem Mineral and Chemical Company, Moscow, Russia
I. S. Barmin, Head of School, Candidate of Engineering Sciences

 

Kovdor Mining and Processing Plant, Kovdor, Russia
N. A. Smirnova, Chief Dresser

Abstract

The article presents the studies on the potential increase in the volume of processing of magnetite–apatite ore from the Kovdor deposit. To solve this task, improvement of ore pretreatment through the preliminary screening before the first stage rod milling is discussed. The analysis of an actual dressing plant operation finds out that the feed of the first stage rod milling contains more than 30% of the finished class of -2 mm, which can be taken out of the mill feed and sent directly to magnetic separation. The study focused on the effect of the pre-screening operation on the indicators of milling and subsequent magnetic separation. The studies determined the coefficient of relative grindability of different-size ore, analyzed the influence of the pre-screening coarseness on the amount of the pay class in the milled product and on the dynamics of dissociation of magnetite and apatite, and estimated the magnetic separation efficiency after the milling in the improved regime. The implemented research shows that processing circuit reaches the largest increment in productivity by 22% at the pre-screening output coarseness of 0.56 mm. The economic efficiency of the new pretreatment technology introduced at the first stage of ore processing lies in the higher productivity and, accordingly, in the larger volume of marketable products at a processing factory. Since the technology implementation needs no growth in number of milling equipment, which is most energy-intensive in mineral beneficiation process, it is expected that economic performance of the whole mining and processing plant also improves.

keywords Milling, rod mill, screening, magnetic separation, pay class, magnetite, apatite, dissociation rate
References

1. Baranov V. F., Patkovskaya N. А., Tasina Т. I. Current trends in magnetite iron ores processing technology. Basic trends. Obogashchenie Rud. 2013. No. 3. pp. 10–17.
2. Gzogyan T. N., Gzogyan S. R., Grishkina E. V. Deep concentration of high-grade iron ore in the Belgorod Region of the Kursk Magnetic Anomaly. Eurasian Mining. 2019. No. 2. pp. 44–48.
3. Pelevin A. E., Kornilkov S. V., Dmitri ev A. N., Bagazeev V. K. Quality improvement of magnetite concentrate in separate processing of different iron ore types and varieties. MIAB. 2021. No. 11-1. pp. 306–317.
4. Lee D., Je J., Kim K., Kwon J., Cho H. Prediction of iron ore mineral liberation behavior using the Andrews–Mika diagram and beta distribution. Advanced Powder Technology. 2022. Vol. 33, Iss. 5. ID 103558.
5. Ismagilov R. I., Kozub A. V., Gridasov I. N., Shelepov E. V. Case study: Advanced solutions applied by JSC Andrei Varichev Mikhailovsky GOK to improve ferruginous quartzite concentration performance. Gornaya promyshlennost. 2020. No. 4. pp. 98–103.
6. Pattanaik A., Rayasam V. Analysis of reverse cationic iron ore fines flotation using RSM-D-optimal design–An approach towards sustainability. Advanced Powder Technology. 2018. Vol. 29, Iss. 12. pp. 3404–3414.
7. Zhang X., Gu X., Han Y., Parra-Álvarez N., Claremboux V. et al. Flotation of iron ores: A review. Mineral Proceeding and Extractive Metallurgy Review. 2021. Vol. 42, Iss. 3. pp. 184–212.
8. Matiolo E., Couto H. J. B., Lima N., Silva K., De Freitas A. S. Improving recovery of iron using column flotation of iron ore slimes. Minerals Engineering. 2020. Vol. 158. ID 106608.
9. Yin W., Wang J., Xu L. N reagents in the reverse flotation of carbonate-containing iron ores. Proceedings of the 11th International Congress for Applied Mineralogy. Cham : Springer, 2015. pp. 459–470.
10. Pelevin A. E. Increasing the efficiency of iron-ore dressing by separation in an alternative magnetic field. Chernye Metally. 2021. No. 5. pp. 4–9.
11. Jiang W., Zhang Y., Liang G. Q., Xia X. W. Development and application of complex flashing-field magnetic cleaner. Advanced Materials Research. 2014. Vol. 1073-1076. pp. 2177–2188.
12. Rosario P. P. Technical and economic assessment of a non-onventional HPGR circuit. Minerals Engineering. 2017. Vol. 103-104. pp. 102–111.
13. Prokopyev S. A., Pelevin A. E., Napolskikh S. A., Gelbing R. A. Staged screw separation of magnetite concentrate. Obogashchenie Rud. 2018. No. 4. pp. 28–33.
14. Sadeghi M., Bazin C., Devin P.-O., Lavoie F., Hodouin D. et al. Control of spiral concentrators for the concentration of iron ore. Proceedings of XXVIII International Mineral Processing Congress. Quebec, 2016. Vol. 7. pp. 4534–4545.
15. Kuskov V., Kuskova Ya., Udovitsky V. Effective Processing of the Iron Ores. Proceedings of II International Innovative Mining Symposium (Devoted to Russian Federation Year of Environment). 2017. E3S Web of Conferences. 2017. Vol. 21. ID 02010.
16. Vaisberg L. А., Kuskova Ya. V. Improvement of circular concentrating tables as development of gravity concentration methods. Obogashchenie Rud. 2017. No. 4. pp. 54–60.
17. Agrawal P., Bacchuwar S., Rao G., Sharma S. Optimization of process parameters of spiral concentrator for beneficiation of iron ore stacked slimes from Kirandul, Chattisgarh, India. Proceedings of XXVIII International Mineral Processing Congress. Quebec, 2016. Vol. 6. pp. 3914–3923.
18. Opalev A. S., Khokhulya M. S., Fomin A. V., Karpov I. V. Creation of innovative technologies for production of high-quality iron concentrate production in the North West of Russia. Gornyi Zhurnal. 2019. No. 6. pp. 56–61.
19. Opalev A. S., Karpov I. V., Krivovichev S. V. Enhancing magnetite quartzite processing efficiency at Karelsky Okatysh. Gornyi Zhurnal. 2021. No. 11. pp. 66–74.
20. Grinenko V. I., Opalev A. S., Maevsky P. V., Karpov I. V. Improvement of iron ore concentrate quality by gravity and magnetic separation at SSGPO JSC. Gornyi Zhurnal. 2021. No. 10. pp. 81–86.
21. Gzogyan S. R., Scherbakov A. V. Improving the quality of concentrates of Stoilensky GOK JSC with the use of magneticAgravity separation. Obogashchenie Rud. 2020. No. 6. pp. 3–8.
22. Gzogyan T. N., Opalev A. S., Gzogyan S. R., Shcherbakov A. V. Application of magnetic–gravitational separation to produce high quality concentrates from ferruginous quartzite in KMA. Proceedings of XII Congress of Dressers from CIS Countries. Moscow, 2019. pp. 182–186.
23. Yushina T. I., Chanturia E. L., Dumov A. M., Myaskov A. V. Modern trends of technological advancement in iron ore processing. Gornyi Zhurnal. 2021. No. 11. pp. 75–83.
24. Jankovic A., Valery W. Reducing grinding energy and cost—Magnetite iron ore design case study. Obogashchenie Rud. 2012. No. 5. pp. 3–8.
25. Baranov V. F. Projects which push the limits of efficient performance concepts of highpressure grinding rollers. Gornyi Zhurnal. 2021. No. 11. pp. 33–38.
26. Maksimov I. I., Sentemova V. A., Akkerman Yu. E. Studies and development of energysaving technology for high-grade concentrates production from oxidized iron ores. Obogashchenie Rud. 2011. No. 6. pp. 3–7.
27. Mezenin A. O., Paykov A. A. Prospects of import substitution in mining and processing sector. Modern Problems of Integrated and Deep Processing of Natural and Technogenic Mineral Raw Materials (Plaksinsky Readings–2022) : Proceedings of International Conference. Vladivostok : Izdatelstvo DVFU, 2022. pp. 78–82.
28. Aleksandrova T. N., Chanturiya A. V., Kuznetsov V. V. Mineralogical and technological features and patterns of selective disintegration of ferruginous quartzites of the Mikhailovskoye deposit. Journal of Mining Institute. 2022. Vol. 256. pp. 517–526.
29. Taranov V. A., Aleksandrova T. N. Estimate of the strength properties of the ore as a factor improvement of the effectiveness of the grinding process. MIAB. 2015. No. 4. pp. 119–123.
30. Moseykin V. V., Absatarov S. Kh. Mineral composition of ferruginous quartzite from Lebedinskoe deposit and the connection with rock fracture processes. MIAB. 2008. No. 2. pp. 97–103.
31. Khramov A. N. Research algorithm of valuable components detection and its application technological possibilities at ore reduction. Vestnik Chitinskogo gosudarstvennogo universiteta. 2012. No. 2(81). pp. 36–41.
32. Postolatieva A. V., Tverdov A. A., Nikishichev S. B. Special aspects of iron ore disintegration processes and terms of reference for the selection of the optimal ore dressing flow sheet. Gornaya promyshlennost. 2013. No. 6. pp. 82–86.
33. Bilenko L. F. Laws of drum milling. Moscow : Nedra, 1984. 200 p.
34. Rakaev A. I. Optimization of ore pretreatment in gravitational separation. Leningrad : Nauka, 1989. 184 p.
35. Bogdanov O. S., Olevskiy V. A., Akinshina I. K. et al. (Eds.). Reference book in ore beneficiation. Vol. 1. Preparation. 2nd revised and enlarged edition. Moscow : Nedra, 1982. 367 p.

Language of full-text russian
Full content Buy
Back