Journals →  Tsvetnye Metally →  2024 →  #6 →  Back

METAL PROCESSING
ArticleName High-speed face milling features of deformable aluminum alloys
DOI 10.17580/tsm.2024.06.10
ArticleAuthor Khalimonenko A. D., Shmakova Yu. R., Admakina O. N., Kufaev V. G.
ArticleAuthorData

Saint Petersburg Mining University, Saint Petersburg, Russia

A. D. Khalimonenko, Associate Professor of the Mechanical Engineering Department, Candidate of Technical Sciences, e-mail: Khalimonenko_AD@pers.spmi.ru

V. G. Kufaev, postgraduate student of the Mechanical Engineering Department, e-mail: kufaev1999@mail.ru

 

JSC Diakont, Saint Petersburg, Russia
Yu. R. Shmakova, Process Engineer, e-mail: shmakova.1999@list.ru

 

Saint Petersburg University of the Humanities and Social Sciences, Saint Petersburg, Russia
O. N. Admakina, Senior Lecturer of the Department of Computer Science and Mathematics, e-mail: spszk1@yandex.ru

Abstract

The article describes the studied opportunity of high-speed milling of deformable aluminum alloys. It reveals the features of high-speed milling in comparison with conventional milling methods. The first set of experiments during high-speed milling of deformable aluminum alloys revealed regularities between cutting force and cutting speed, when milling at constant feed per tooth of a milling cutter, milling width and depth. The second set of experiences revealed regularities between cutting force and cutting speed, when milling with constant feed per minute, milling width and depth. The studies determined regularities between roughness of the surfaces machined by high-speed milling and cutting speed at constant feed per tooth of a milling cutter and feed per minute. The analysis of data obtained in the course of the experiments showed that when maintaining constant feed per tooth and increasing cutting speed to values of high-speed milling, cutting force decreased by 1.5 times, and milling performance increased sharply. When feed per tooth decreases and feed per minute is constant, during high-speed milling cutting force decreases by over 2.5 times as compared with cutting modes during conventional milling. The results achieved in the course of the studies are proposed to be used in a practical operation of mechanical engineering plants and creating a database of cutting modes during high-speed milling of deformable aluminum alloys and other materials.

keywords Milling, high-speed machining, aluminum alloys, cutting speed, surface roughness, cutting force, feed per tooth, milling cutter, feed per minute, performance
References

1. Serbin D. V., Dmitriev A. N. Experimental research on the thermal method of drilling by melting the well in ice mass with simultaneous controlled expansion of its diameter. Journal of Mining Institute. 2022. Vol. 257. pp. 833–842. DOI: 10.31897/PMI.2022.82
2. Shishlyannikov D. I., Zverev V. Yu., Zvonareva A. G., Frolov S. A., Ivanchenko A. A. Evaluation of the energy efficiency of functioning and increase in the operating time of hydraulic drives of sucker-rod pump units in difficult operating conditions. Journal of Mining Institute. 2023. Vol. 261. pp. 349–362.
3. Mikhaylov A. V., Kazakov Yu. A., Garifullin D. R., Korotkova O. Yu. et al. Analysis of the mobile complex structure for organogenic materials mining by in-pit method. Gornyy informatsionno-analiticheskiy byulleten. 2022. Vol. 6-1. pp. 317-330. DOI: 10.25018/0236_1493_2022_61_0_317
4. Bolobov V. I., Plashchinskiy V. A. On the assessment of energy consumption when splitting rock fragments. Obogashchenie Rud. 2023. No. 2. pp. 3–8.
5. Yungmeister D. A., Timofeev M. I., Isaev A. I., Gasymov E. E. Improvement of tunnel boring machine S-782 cutter head. Gornyy informatsionno-analiticheskiy byulleten. 2023. Vol. 1. pp. 107–118. DOI: 10.25018/0236_1493_2023_1_0_107
6. Gabov V. V., Zadkov D. A., Babyr N. V., Fangwei X. Nonimpact rock pressure regulation with energy recovery into the hydraulic system of the longwall powered support. Eurasian Mining. 2021. Vol. 2. pp. 55–59.

7. Olt J., Maksarov V. V., Efimov A. E. Improving the surface quality of titanium-alloy components in machining. Russian Engineering Research. 2023. Vol. 43, No. 2. pp. 195–198. DOI: 10.3103/S1068798X23030255
8. Vasilko K., Murcinková Z. Reduction in total production cycle time by the tool holder for the automated cutting insert quick exchange and by the double cutting tool holder. Journal of Manufacturing and Materials Processing. 2023. Vol. 7, No. 3. 99. DOI: 10.3390/jmmp7030099
9. Maksarov V. V., Popov M. A., Zakharova V. P. Influence of magnetic-abrasive machining parameters on ceramic cutting tools for technological quality assurance of precision products from cold-resistant steels. Chernye Metally. 2023. No. 1. pp. 67–73.
10. Shibanov D. A., Ivanov S. L., Sheshukova E. I., Nedashkovskaya E. S. Efficiency of operation of a quarry excavator as an ergatic system. Gornyy informatsionno-analiticheskiy byulleten. 2023. No. 11-1. pp. 144–158. DOI: 10.25018/0236_1493_2023_111_0_144
11. Zhukov I. A., Martyushev N. V., Zyukin D. A., Azimov A. M. et al. Modification of hydraulic hammers used in repair of metallurgical units. Metallurgist. 2023. Vol. 66, No. 11-12. pp. 1644–1652. DOI: 10.1007/s11015-023-01480-w
12. Ivanov S. L., Ivanova P. V., Kuvshinkin S. Yu. Promising model range career excavators operating time assessment in real operating conditions. Journal of Mining Institute. 2020. No. 242. pp. 228–233. DOI: 10.31897/pmi.2020.2.228
13. Kulchitskiy A. A., Mansurova O. K., Nikolaev M. Yu. Recognition of defects in hoisting ropes of metallurgical equipment by an optical method using neural networks. Chernye Metally. 2023. No. 3. pp. 81–88.
14. Shishlyannikov D. I., Zverev V. Yu., Ivanchenko A. A., Zvonarev I. E. Increasing the time between failures of electric submersible pumps for oil production with high content of mechanical impurities. Applied Sciences. 2022. Vol. 12, No. 1. 64. DOI: 10.3390/app12010064
15. Zhang J., Huang X., Kang X., Yi H. et al. Energy field-assisted highspeed dry milling green machining technology for difficult-to-machine metal materials. Frontiers of Mechanical Engineering. 2023. Vol. 18, No. 2. 28. DOI: 10.1007/s11465-022-0744-9
16. Shipulin L. V., Ardashev D. V. Concept of designing high-speed processing operations based on complex process simulation. Procedia Manufacturing. 2020. Vol. 46, No. 12. pp. 64–69. DOI: 10.1016/j.promfg.2020.03.011
17. Chen Y., Cao H. J., Yang X. Research on load distribution characteristic on the cutting edge in high-speed gear hobbing process. Journal of Mechanical Engineering. 2017. Vol. 53, No. 15. pp. 181–187. DOI: 10.3901/JME.2017.15.181
18. GOST R 58582–2019. Milling cutt ers for high speed machining. Safety requirements. Introduced: 01.01.2021.
19. Kim S. W., Lee D. W., Kang M. C., Kim J. S. Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials. Journal of Materials Processing Technology. 2001. Vol. 111, No. 1-3. pp. 256–260. DOI: 10.1016/S0924-0136(01)00529-5
20. Hideaki O., Koji U., Ippei K., Junichi H. et al. High speed milling processes with long oblique cutting edges. Journal of Manufacturing Processes. 2015. Vol. 19. pp. 95–101. DOI: 10.1016/j.jmapro.2015.06.004
21. Dyakonov A. A., Herreinstein A. V., Degtyareva-Kashutina A. S. Thermophysical problem for high-speed processing. Materials Today Proceedings. 2019. Vol. 11. pp. 46–52. DOI: 10.1016/j.matpr.2018.12.105
22. Bazhin V. Yu., Ustinova Ya. V., Fedorov S. N., Shalabi M. E. Kh. Improvement of energy efficiency of ore-thermal furnaces in smelting of alumosilicic raw materials. Journal of Mining Institute. 2023. Vol. 261. pp. 384–391.
23. Alattar A. L., Nikitina L. N., Bazhin V. Y. Increase in the physicomechanical properties of aluminum alloys reinforced with boron carbide particles. Russian Metallurgy (Metally). 2023. Vol. 6. pp. 688–694. DOI: 10.1134/S0036029523060071
24. Piirainen V. Yu., Barinkova A. A. Development of composite materials based on red mud. Obogashchenie Rud. 2023. No. 3. pp. 37–43.
25. Rao B., Shin Y. C. Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters. International Journal of Machine Tools & Manufacture. 2001. Vol. 41, No. 12. pp. 1763–1781. DOI: 10.1016/S0890-6955(01)00033-5
26. Hricova J., Kovac M., Sugar P. Experimental investigation of high speed milling of aluminium alloy. Tehnicki vjesnik - Technical Gazette. 2014. Vol. 21, No. 4. pp. 773–777.
27. Shirokikh E. V., Kosyanova A. K. Efficiency of applying ultra-hard materials for high-speed machining of aluminum alloys of metals. Kompleksnye problemy razvitiya nauki, obrazovaniya i ekonomiki regiona. 2014. No. 2. pp. 96–101.
28. Nikolaev A. Yu., Savilov A. V. Pre-production effectiveness increase at high-speed high-strength aluminum parts milling. Naukoemkie tekhnologii v mashinostroenii. 2021. No. 2. pp. 36–40. DOI: 10.30987/2223-4608-2021-2-36-40
29. Patraev E. V., Vakulin M. S., Gordeev Yu. I., Yasinskiy V. B. Highspeed micromilling of composite and aluminum alloy parts. Izvestiya vuzov. Mashinostroenie. 2021. No. 12. pp. 62–72. DOI: 10.18698/0536-1044-2021-12-62-72
30. Vogler M. P., Devor R. E., Kapoor S. G. On the modeling and analysis of machining performance in micro-end milling. Journal of Manufacturing Science and Engineering. 2004. Vol. 126, No. 4. pp. 685–694. DOI: 10.1115/1.1813470
31. Basova T. V., Andreev Y. S., Basova M. V. The development of cutting tools active control methodology for numerical control milling machines. 2022 International Ural Conference on Electrical Power Engineering (Ural-Con). 2022. pp. 108–112. DOI: 10.1109/UralCon54942.2022.9906666
32. Ershov D. Y., Zlotnikov E. G., Timofeev D. Y. Analysis of proper fluctuations of technological systems. IOP Conference Series: Materials Science and Engineering. 2019. Vol. 560, No. 1. 012015. DOI: 10.1088/1757-899X/560/1/012015
33. Zubarev Yu. M., Kruglov A. I., Afanasenkov M. A. Choosing modifying elements to adjust properties of functional barrier sublayers of a tool material surface layer. Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta. 2015. No. 11. pp. 18–20.
34. Pryakhin E. I., Mikhaylov A. V., Sivenkov A. V. Technological features of surface alloying of metal products with Cr – Ni complexes in the medium of low-melting metal melts. Chernye Metally. 2023. No. 2. pp. 58–65.
35. Process engineer’s/Mechanical engineer’s reference book. Vol. 2. Dalskiy A. M. et al. Moscow : Mashinostroenie, 2001. pp. 402–412.
36. Maksarov V. V. Keksin A. I., Filipenko I. A. Influence of magnetic-abrasive processing on roughness of flat products made of AMts grade aluminum alloy. Tsvetnye Metally. 2022. No. 7. pp. 82–87.
37. Maksimov D., Shcheglova R., Klochkov D. Technological assurance of the quality of processing of products from aluminum alloys with a complex geometric shape using magnetic abrasive processing. E3S Web of Conferences. 2021. Vol. 326. 00033. DOI: 10.1051/e3sconf/202132600033

Language of full-text russian
Full content Buy
Back