Journals →  Non-ferrous Мetals →  2024 →  #1 →  Back

MATERIALS SCIENCE
ArticleName Structural optimization of cast in-situ aluminum matrix composites: challenges and opportunities
DOI 10.17580/nfm.2024.01.07
ArticleAuthor Deev V. B., Prusov E. S., Ri E. Kh.
ArticleAuthorData

Wuhan Textile University, Wuhan, China1 ; National University of Science and Technology “MISiS”, Moscow, Russia2 ; Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia3

V. B. Deev*, Professor, Chief Researcher3, Professor at the Faculty of Mechanical Engineering and Automation1, Professor at the Department of Metal Forming2, e-mail: deev.vb@mail.ru

 

Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia

E. S. Prusov, Associate Professor, Department of Functional and Constructional Materials Technology

 

Pacific National University, Khabarovsk, Russia

E. Kh. Ri, Professor, Head of the Department of Foundry Engineering and Metal Technology

 

*Correspondence author.

Abstract

In this work, a comprehensive analysis was performed to assess the impact of chemical and physical modifying in fluences on the structural formation of cast metal matrix composites with in-situ formed reinforcing phases, using the pseudo-binary Al – Mg2Si system as a case study. Relevant problematic issues were identified, and prospective approaches to controlling the structural-morphological parameters of aluminum matrix composites during melting and crystallization were determined. Recent advancements in investigating the influence of thermal-rate and electromagnetic pulsed processing of melts on the structure of in-situ aluminum matrix composites were summarized. An evaluation of the influence of various modifying elements on the structure of pseudo-binary aluminum alloys and composites was provided. The feasibility and effectiveness of employing alkali and alkali-earth metals for the modification of Al – Mg2Si aluminum matrix composites were confirmed, replacing expensive rare-earth metals. Additionally, it was demonstrated that lithium yields the most significant modifying effect, considering a complex assessment of its impact on the structure.

This research was funded by the Russian Science Foundation (Project № 20-19-00687-П, https://rscf.ru/project/23-19-45019/).

keywords Aluminum matrix composites, in-situ reinforcement, structure formation, modification, structural-morphological parameters, physical and chemical effects
References

1. Rohatgi P. K., Ajay Kumar P., Chelliah Nagaraj M., Rajan T. P. D. Solidification Processing of Cast Metal Matrix Composites Over the Last 50 Years and Opportunities for the Future. JOM. 2020. Vol. 72. pp. 2912–2926.
2. Mavhungu S. T., Akinlabi E. T., Onitiri M. A., Varachia F. M. Aluminum Matrix Composites for Industrial Use: Advances and Trends. Procedia Manufacturing. 2017. Vol. 7. pp. 178–182.
3. Mortensen A., Llorca J. Metal Matrix Composites. Annual Review of Materials Research. 2010. Vol. 40. Iss. 1. pp. 243–270.
4. Samal P., Vundavilli P. R., Meher A., Mahapatra M. M. Recent Progress in Aluminum Metal Matrix Composites: A
Review on Processing, Mechanical and Wear Properties. Journal of Manufacturing Processes. 2020. Vol. 59. pp. 131–152.
5. Sarmah P., Patowari P. K. Mechanical and Tribological Analysis of the Fabricated Al 6063-based MMCs with SiC Reinforcement Particles. Silicon. 2023. Vol. 15. pp. 2781–2796.
6. Chen R., Zhang G. Casting Defects and Properties of Cast A356 Aluminium Alloy Reinforced with SiC Particles. Composites Science and Technology. 1993. Vol. 47, Iss. 1. pp. 51–56.
7. Sijo M. T., Jayadevan K. R. Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: a Comprehensive Review. Procedia Technology. 2016. Vol. 24. pp. 379–385.
8. Singh H., Singh K., Vardhan S., Sharma S. M. A Comprehensive Review on the New Developments Consideration in a Stir Casting Processing of Aluminum Matrix Composites. Materials Today: Proceedings. 2022. Vol. 60, Pt. 2. pp. 974–981.
9. Pramod S. L., Bakshi S. R., Murty B. S. Aluminum-Based Cast in Situ Composites: a Review. Journal of Materials Engineering and Performance. 2015. Vol. 24. pp. 2185–2207.
10. Biswas P., Mondal M. K., Roy H., Mandal D. Microstructural Evolution and Hardness Property of in situ Al – Mg2Si Composites Using One-Step Gravity Casting Method. Canadian Metallurgical Quarterly. 2017. Vol. 56, Iss. 3. pp. 340–348.
11. Srinivas V., Singh V. Development of in Situ as Cast Al-Mg2Si Particulate Composite: Microstructure Refinement and Modification Studies. Transactions of the Indian Institute of Metals. 2012. Vol. 65, Iss. 6. pp. 759–764.
12. Zhang J., Fan Z., Wang Y. Q., Zhou B. L. Equilibrium Pseudobinary Al – Mg2Si Phase Diagram. Materials Science and Technology. 2001. Vol. 17, Iss. 5. pp. 494–496.
13. Li C., Wu Y. Y., Li H., Liu X. F. Morphological Evolution and Growth Mechanism of Primary Mg2Si Phase in Al – Mg2Si Alloys. Acta Materialia. 2011. Vol. 59, Iss 3. pp. 1058–1067.
14. Li C., Wu Y., Li H., Wu Y., Liu X. Effect of Ni on Eutectic Structural Evolution in Hypereutectic Al – Mg2Si Cast Alloys. Materials Science and Engineering A. 2010. Vol. 528, Iss. 2. pp. 573–577.
15. Deev V. B., Prusov E. S., Ri E. H. Physical Methods of Processing the Melts of Metal Matrix Composites: Current State and Prospects. Russian Journal of Non-Ferrous Metals. 2022. Vol. 63. No. 3. P. 292–304.
16. Deev V., Prusov E., Rakhuba E. Physical Methods of Melt Processing at Production of Aluminum Alloys and Composites: Opportunities and Prospects of Application. Materials Science Forum. 2019. Vol. 946. pp. 655–660.
17. Selyanin I. F., Deev V. B., Belov N. A., Prikhodko O. G., Ponomareva K. V. Physical Modifying Effects and Their Influence on the Crystallization of Casting Alloys. Russian Journal of Non-Ferrous Metals. 2015. Vol. 56, Iss. 4. pp. 434–436.
18. Deev V. B., Selyanin I. F., Kutsenko A. I., Belov N. A., Ponomareva K. V. Promising Resource Saving Technology for Processing Melts During Production of Cast Aluminum Alloys. Metallurgist. 2015. Vol. 58. pp. 1123–1127.
19. Deev V. B., Prusov E. S., Kutsenko A. I. Theoretical and Experimental Evaluation of the Effectiveness of Aluminum Melt Treatment by Physical Methods. Metallurgia Italiana. 2018. No. 2. pp. 16–24.
20. Prusov E. S., Deev V. B., Aborkin A. V., Ri E. K., Rakhuba E. M. Structural and Morphological Characteristics of the Friction Surfaces of In-Situ Cast Aluminum Matrix Composites. Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques. 2021. Vol. 15, Iss. 6. pp. 1332–1337.
21. Jie Z., Zhang J., Huang T., Liu L., Fu H. The Influence of Melt Superheating Treatment on the Cast Structure and Stress Rupture Property of IN718C Superalloy. Journal of Alloys and Compounds. 2017. Vol. 706. pp. 76–81.
22. Deev V., Prusov E., Ri E., Prihodko O., Smetanyuk S., Chen X., Konovalov S. Effect of Melt Overheating on Structure and Mechanical Properties of Al – Mg – Si Cast Alloy. Metals. 2021. Vol. 11, Iss. 9. 1353.
23. Deev V. B., Ri E. K., Prusov E. S., Ermakov M. A., Kim E. D. Influence of Parameters of Melt Processing by Nanosecond Electromagnetic Pulses on the Structure Formation of Cast Aluminum Matrix Composites. Russian Journal of Non-Ferrous Metals. 2022. Vol. 63, Iss. 4. pp. 392–399.

24. Deev V., Ri E., Prusov E. Effect of aluminum melt treatment by nanosecond electromagnetic pulses on structure and properties of castings. 73rd World foundry congress “Creative Foundry” (WFC 2018): Proceedings (Polish Foundrymen’s Association). 2018. pp. 155–156.
25. Krymsky V., Shaburova N. Applying of Pulsed Electromagnetic Processing of Melts in Laboratory and Industrial Conditions. Materials. 2018. Vol. 11, Iss. 6. 954.
26. Krymsky V. V., Shaburova N. A., Litvinova E. V. Micro structure and Properties of Cast Metal Treated with Electromagnetic Pulses While in Molten State. Materials Science Forum. 2016. Vol. 843. pp. 106–110.
27. Deev V. B., Prusov E. S., Ri E. Kh. Microstructural Modification of In Situ Aluminum Matrix Composites Via Pulsed Electromagnetic Processing of Crystallizing Melt. Non-Ferrous Metals. 2023. No. 1. pp. 36–40.
28. Nordin N. A., Farahany S., Ourdjini A., Abu Bakar T. A., Hamzah E. Refinement of Mg2Si Reinforcement in a Commercial Al – 20%Mg2Si In-Situ Composite with Bismuth, Antimony and Strontium. Materials Characterization. 2013. Vol. 86. pp. 97–107.
29. Hadian R., Emamy M., Campbell J. Modification of Cast Al-Mg2Si Metal Matrix Composite by Li. Metallurgical and Materials Transactions B. 2009. Vol. 40, Iss. 6. pp. 822–832.
30. Hadian R., Emamy M., Varahram N., Nemati N. The Effect of Li on the Tensile Properties of Cast Al – Mg2Si Metal Matrix Composite. Materials Science and Engineering A. 2008. Vol. 490, Iss. 1-2. pp. 250–257.
31. Zuo M., Ren B., Xia Z., Ma W., Lv Y., Zhao D. Microstructure Evolution and Performance Improvement of Hypereutectic Al-Mg2Si Metallic Composite with Ca or Sb. Materials. 2020. Vol. 13, Iss. 12. 2714.
32. Wang D., Zhang H., Han X., Shao B., Li L., Cui J. The Analysis of Strontium Modification on Microstructure and Mechanical Properties of Al – 25%Mg2Si In Situ Composite. Journal of Materials Engineering and Performance. 2017. Vol. 26, Iss. 9. pp. 4415–4423.
33. Wu X., Wang K., Wu F., Zhao R., Chen M., Xiang J., Ma S., Zhang Y. Simultaneous Grain Refinement and Eutectic Mg2Si Modification in Hypoeutectic Al – 11Mg2Si Alloys by Sc Addition. Journal of Alloys and Compounds. 2019. Vol. 791. pp. 402–410.
34. Jin Y., Fang H., Wang S., Chen R., Su Y., Guo J. Effects of Eu Modification and Heat Treatment on Microstructure and Mechanical Properties of Hypereutectic Al – Mg2Si Composites. Materials Science and Engineering: A. 2022. Vol. 831. 142227.
35. Ghandvar H., Jabbar K. A., Idris M. H., Ahmad N., Jahare M. H., Koloor S. S. R., Petr M. Influence of Barium Addition on the Formation of Primary Mg2Si Crystals from Al – Mg – Si Melts. Journal of Materials Research and Technology. 2021. Vol. 11. pp. 448–465.
36. Zuo M., Ren B., Xia Z., Ma W., Lv Y., Zhao D. Microstructure Evolution and Performance Improvement of Hypereutectic Al – Mg2Si Metallic Composite with Ca or Sb. Materials. 2020. Vol. 13. 2714.
37. Khorshidi R., Honarbakhsh-Raouf A., Mahmudi R. Effect of Minor Gd Addition on the Microstructure and Creep Behavior of a Cast Al – 15Mg2Si in Situ Composite. Materials Science and Engineering: A. 2018. Vol. 718. pp. 9–18.
38. Ghandvar H., Idris M. H., Ahmad N., Emamy M. Effect of Gadolinium Addition on Microstructural Evolution and Solidification Characteristics of Al – 15%Mg2Si In-Situ Composite. Materials Characterization. 2018. Vol. 135. pp. 57–70.
39. Nanda I. P., Ghandvar H., Idris M., Arafat A. Influence of Superheating Melt Treatment on Microstructure of Gd-Modified Al – 15wt.% Mg2Si In-Situ Composite. International Journal of Automotive and Mechanical Engineering. 2020. Vol. 17, Iss. 2. pp. 7967–7973.
40. Wu X., Zhang G., Wu F., Wang Z. Influence of Neodymium Addition on Microstructure, Tensile Properties and Fracture Behavior of Cast Al – Mg2Si Metal Matrix Composite. Journal of Rare Earths. 2013. Vol. 31, Iss. 3. pp. 307–312.
41. Wu X.-F., Zhang G.-G., Wu F.-F. Microstructure and Dry Sliding Wear Behavior of Cast Al – Mg2Si In-Situ Metal Matrix Composite Modified by Nd. Rare Metals. 2013. Vol. 32, Iss. 3. pp. 284–289.
42. Si Y. Effect of Pr Modification Treatment on the Microstructure and Mechanical Properties of Cast Al – Mg2Si Metal Matrix Composite. Advanced Materials Research. 2014. Vol. 936. pp. 23–27.
43. Emamy M., Khodadadi M., Honarbakhsh Raouf A., Nasiri N. The Influence of Ni Addition and Hot-Extrusion on the Microstructure and Tensile Properties of Al – 15%Mg2Si Composite. Materials & Design. 2013. Vol. 46. pp. 381–390.
44. Hesami L., Taghiabadi R., Ghoncheh M.H. Study on the Modification Effect of Copper on Al – 15Mg2Si Composite. Materials Chemistry and Physics. 2022. Vol. 276. 125323.
45. Zuo M., Han H., Wang D., Zhao D., Wang Y., Wang Z. The Heterogeneous Nucleation Behavior of Al – Hf – P Master Alloy and its Influence on the Refinement of Mg2Si Phase in Mg2Si/Al Composites. Results in Physics. 2017. Vol. 7. pp. 2012–2021.
46. Deev V., Prusov E., Shurkin P., Ri E., Smetanyuk S., Chen X., Konovalov S. Effect of La Addition on Solidification Behavior and Phase Composition of Cast Al – Mg – Si Alloy. Metals. 2020. Vol. 10, Iss. 12. 1673.
47. Rhoades S. A. Market Share Inequality, the HHI, and Other Measures of the Firm-Composition of a Market. Review of Industrial Organization. 1995. Vol. 10, Iss. 6. pp. 657–674.
48. Gaultois M. W., Sparks T. D., Borg C. K. H., Seshadri R., Bonificio W. D., Clarke D. R. Data-Driven Review of Thermoelectric Materials: Performance and Resource Considerations. Chemistry of Materials. 2013. Vol. 25, Iss. 15. pp. 2911–2920.

Full content Structural optimization of cast in-situ aluminum matrix composites: challenges and opportunities
Back