Journals →  Tsvetnye Metally →  2024 →  #9 →  Back

BENEFICIATION
ArticleName Comparative assessment of the solvation properties of dialkyldithiophosphates and dialkylmonothiophosphates of copper(I) in various processes
DOI 10.17580/tsm.2024.09.02
ArticleAuthor Kuzmin V. I., Kuzmin D. V., Gudkova N. V., Leskiv M. N.
ArticleAuthorData

Institute of Chemistry and Chemical Technology, Federal Research Center Krasnoyarsk Science Center, the Siberian Branch of the Russian Academy of Sciences, Krasnoyarsk, Russia

V. I. Kuzmin, Deputy Director for Research, Doctor of Chemical Sciences, e-mail: kuzmin_vi@mail.ru
D. V. Kuzmin, Senior Researcher, Candidate of Chemical Sciences, e-mail: kuzmin-dv@mail.ru
N. V. Gudkova, Researcher, Candidate of Chemical Sciences, e-mail: navlla@mail.ru
M. N. Leskiv, Researcher, Candidate of Chemical Sciences, e-mail: cherry_garden@inbox.ru

Abstract

The article describes synthesized copper(I) dibutyldithiophosphate and dibutylmonothiophosphate, which are often formed as secondary products during flotation with sulfhydryl reagents. Their solvation properties were studied in various heterogeneous processes. A significant increase in the extraction of lithium chloride by tributyl phosphate was established in the presence of these reagents, especially noticeable for copper(I) dibutylmonothiophosphate. The increase in extraction recovery was due to the acceptor activity of the studied reagents driven by the copper(I) cation, which was prone to the formation of complex compounds with halide ions. The weaker effect of copper(I) dibutyldithiophosphate was associated with significant self-association of the product and a partial formation of low-active cyclic tetramers in the organic phase. The reagents were shown to be well absorbed from the solutions in toluene on nickel and copper(I) sulfides. The adsorption isotherms of the reagents reach saturation in the concentration range up to 0.0002 mol/l. The activity of copper dibutyldithiophosphate on nickel sulfide was also reduced in comparison with dibutylmonothiophosphate; however, this effect was less pronounced than in the extraction system. The differences in the adsorption properties of the studied reagents practically disappeared with copper(I) sulfide, which was probably caused by the additional coordination bond of sulfide copper with sulfur (=S) of the copper(I) dibutyldithiophosphate molecule. The obtained data show that the studied reagents may be more active collectors in flotation enrichment of ores than dibutylthiophosphoric acids or their sodium and potassium salts. This was primarily due to coordinatively unsaturated copper(I) cations in the molecules of the reagents, which provided the fixation of the reagents on the surface of sulfide minerals and their hydrophobization. 

keywords Sulfhydryl collectors, butyl aerofloat, dibutyldithiophosphates, copper(I) dibutylmonothiophosphates, solvation, extraction, absorption
References

1. Dhar P., Thornhill M., Kota H. R. Investigation of copper recovery from a new copper ore deposit (Nussir) in Northern Norway: Dithiophosphates and xanthate-dithiophosphate blend as collectors. Minerals. 2019. Vol. 9, No. 3. 146.
2. Han C., Wei D., Gao S., Zai Q., Shen Y., Liu W. Adsorption and desorption of butyl xanthate on chalcopyrite. Journal of Materials Research and Technology. 2020. Vol. 9, No. 6. pp. 12654–12660.
3. Hu Y., Wu M., Liu R., Sun W. A review on the electrochemistry of galena flotation. Minerals Engineering. 2020. Vol. 150. 106272.
4. Tijsseling L. T., Dehaine Q., Rollinson G. K., Glass H. J. Flotation of mixed oxide sulphide copper-cobalt minerals using xanthate, dithiophosphate, thiocarbamate and blended collectors. Minerals Engineering. 2019. Vol. 138. pp. 246–256.
5. Tercero N., Nagaraj D. R., Farinato R. A critical overview of dithiophosphinate and dithiophosphate interactions with base metal sulfides and precious metals. Mining, Metallurgy & Exploration. 2019. Vol. 36, No. 1. pp. 99–110.
6. Pienaar D., Jordaan T., McFadzean B., O'Connor C. T. The synergistic interaction between dithiophosphate collectors and frothers at the airwater and sulphide mineral interface. Minerals Engineering. 2019. Vol. 138. pp. 125–132.
7. Persson I. Review: adsorption of ions and molecules to solid surfaces in connection with flotation of sulphide minerals. Journal of Coordination Chemistry. 1994. Vol. 32. pp. 261–342.
8. Rusanova-Naydenova D. An NMR synopsis of the coordination chemistry of copper(I) dithiophosphate clusters : dissertation. Sweden : Luleå University of Technology, 2006.
9. Rusanova D., Forsling W., Antzutkin O. N., Pike K. J., Dupree R. Formation of O,O-di-alkyl-dithiophosphate copper(I) complexes on the surface of synthetic chalcocite-NMR and SEM studies. Centenary of Flotation Symposium: 06/06/2005-09/06/2005. The Australian Institute of Mining and Metallurgy. 2005. pp. 581–590.
10. Lawton S. L., Rohrbaugh W. G., Kokotailo G. T. Crystal and molecular structure of the tetranuclear metal cluster complex copper(I) O,O-diisopropylphosphorodithioate, Cu4[(iso-PrO)2PS2]4. Inorganic Chemistry. 1972. Vol. 11. pp. 612–618.
11. Yordanov N. D., Alexiev V., Macicek J., Glowiak T. Russel D. Studies on intermolecular interactions of metal chelate complexes. V. copper (II) dithiophosphate complexes: an example of an inner self-redox reaction. Transition Metal Chemistry. 1983. Vol. 8. pp. 257–261.
12. Yordanov N. D. A spectroscopic study of the self-redox reaction of sulfurcontaining copper (II) complexes. Transition Metal Chemistry. 1997. Vol. 22. pp. 200–207.
13. Shopov D., Iordanov N. Electron paramagnetic resonance investigations of some copper (II) dialkyldithiophosphate complexes. Inorganic Chemistry. 1970. Vol. 9. pp. 1943–1946.
14. Kuzmin V. I., Logutenko O. А. Effect of unlimited self-association of a component of a chemical reaction on the equilibrium states of the copper dialkyldithiophosphate systems. Journal of Molecular Liquids. 2020. Vol. 299. pp. 112–128.
15. Logutenko O. A. Study on the interphase interaction between dialkyldithiophosphoric acid and its salts and copper, nickel and cobalt salts : thesis ... of the Candidate of Chemical Sciences. Krasnoyarsk, 1990.
16. Samoylov Yu. M. Study on the lithium chloride distribution in the neutral extraction solvent – FeCl3 – MCln – H2O system. The 7th All-Union Conference on Chemistry and Technology of Rare Alkali Elements. Conference abstracts. Apatity, 1988. pp. 109–110.
17. Kuzmin V. I., Kuzmina V. N., Gudkova N. V. Extraction of metal bromides from chloride brines with mixtures of molecular iodine and tributyl phosphate. Hydrometallurgy. 2018. Vol. 180. pp. 221–228.

Language of full-text russian
Full content Buy
Back