Журналы →  Obogashchenie Rud →  2024 →  №5 →  Назад

ORE PREPARATION
Название The influence of temperature on physical, mechanical, and grain size distribution characteristics of crushed ore
DOI 10.17580/or.2024.05.01
Автор Novikov Yu. V., Vlasova V. V., Burdonov A. E.
Информация об авторе

Irkutsk National Research Technical University (Irkutsk, Russia)

Novikov Yu. V., Postgraduate Student, 89500505553r@gmail.com
Vlasova V. V., Associate Professor, Candidate of Engineering Sciences, vlaver@istu.edu
Burdonov A. E., Associate Professor, PhD in Engineering Sciences, slimbul@inbox.ru

Реферат

This article investigates the effect of temperature on the fragmentation behavior of gold-bearing ore, specifically sandstone-siltstone. The experimental study focused on the impact of varying temperature conditions on rock destruction processes. The strength characteristics of ore samples were evaluated at temperature intervals ranging from +20 °C to –20 °C, with measurements taken at 5 °C increments under conditions of natural moisture. For each temperature setting, comprehensive strength profiles were generated for the ore samples. Results indicate that, as temperature decreases, resistance to uniaxial compression increases, while resistance to uniaxial tension decreases. Regression models, developed using the Lasso and Ridge methods, quantitatively describe the relationship between temperature and strength characteristics. Additionally, the grain size distribution properties of the fractured samples were assessed. Microscopic analysis of the newly formed surfaces has confirmed the hypothesis that temperature variations influence the development of internal defects within the rock matrix. Based on these observations, the energy consumption required for ore breakage at different temperatures was calculated. The study has revealed that as the temperature drops from +20 °C to –20 °C, the specific energy required for achieving a target particle size increases by 0.328 kW·h/t. These findings are critical for optimizing mining and processing operations in environments with significant temperature fluctuations. The study underscores the importance of accounting for temperature-induced changes in rock strength and energy demands during ore extraction and processing, particularly in regions with extreme seasonal variations. The results contribute to the ongoing effort to improve efficiency and reduce costs in the mining industry under variable temperature conditions.

Ключевые слова Ore preparation, crushing, strength certificate, grain size distribution, temperature, energy consumption
Библиографический список

1. Zakharov E. V., Kurilko A. S. Energy intensity of rock destruction at the diamond deposits of Yakutia after freezing and thawing cycles. Obogashchenie Rud. 2018. No. 5. pp. 11–16.
2. Ermolovich E. A., Ovchinnikov A. V. Investigation of thermal and material fields influence on changes of physical and mechanical characteristics of chalk for assessment of its workability. Izvestiya Tulskogo Gosudarstvennogo Universiteta. Nauki o Zemle. 2020. No. 2. pp. 247–263.
3. Gurlev I. V. Problems and prospects of connecting mining enterprises in the Far North. Vestnik Evraziyskoy Nauki. 2020. Vol. 12, No. 2. URL: https://esj.today/PDF/22ECVN220.pdf
4. Petrenko O. V., Melnichuk M. O., Dychko A. O. The influence of temperature on the strength of rocks in the kinetic theory of destruction. Industrial ecology: proc. of the International scientific and technical conference. Minsk: BNTU, 2015. pp. 361–366.
5. Kuznetsov N. N., Pak A. K., Fedotova Yu. V. Study of strain behavior and energy intensity failure of the Kovdor deposit hard rock samples. Gornyi Informatsionno-analiticheskiy Byulleten'. 2015. No. 56. pp. 286–293.
6. Zakharov E. V., Kurilko A. S. Energy indicators of rock destruction and their dependence on the temperature factor. Prirodnye Resursy Arktiki i Subarktiki. 2009. No. 1. pp. 19–25.
7. Vaisberg L. A., Kameneva E. E. Changes in rock structure with cyclic freezing and thawing. Obogashchenie Rud. 2015. No. 2. pp. 28–31.
8. Sultanalieva R. M., Konushbaeva A. T., Turdubaeva Ch. B. Research influence of temperature on work of destruction strong rocks. Mezhdunarodnyi Zhurnal Prikladnykh i Fundamentalnykh Issledovaniy. 2019. No. 11. pp. 101–104.

9. Zakharov E. V., Kurilko A. S. Local minimum of energy consumption in hard rock failure in negative temperature range. Fiziko-tekhnicheskiye Problemy Razrabotki Poleznykh Iskopayemykh. 2014. No. 2. pp. 94–98.
10. García-Nieto P. J., Garcia-Gonzalo E., Paredes-Sánchez J. P. Prediction of the critical temperature of a superconductor by using the WOA/MARS, Ridge, Lasso and Elastic-net machine learning techniques. Neural Computing and Applications. 2021. Vol. 33. pp. 17131–17145.
11. Lu Y., Zhang Yu.-H., Ma E., Han W.-Zh. Relative mobility of screw versus edge dislocations controls the ductileto-brittle transition in metals. Proceedings of the National Academy of Sciences. 2021. Vol. 118, No. 37. DOI: 10.1073/pnas.2110596118
12. Chen Y., Tan Sh., Li N. et al. Self-elimination of intrinsic defects improves the low-temperature performance of perovskite photovoltaics. Joule. 2020. Vol. 4, Iss. 9. pp. 1961–1976.
13. Vagnon F., Vinciguerra S. C., Comina C., Colombero Ch., Ferrero A. M., Missagi R. Assessing energy balance via seismic and mechanical observations in high temperature induced crack damage in marbles. Heliyon. 2023. Vol. 9, Iss. 9. DOI: 10.1016/j.heliyon.2023.e19184
14. Torabizadeh M. A. Tensile, compressive and shear properties of unidirectional glass/epoxy composites subjected to mechanical loading and low temperature services. Indian Journal of Engineering and Materials Sciences. 2013. Vol. 20, Iss. 4. pp. 299–309.
15. Östlund F., Rzepiejewska-Malyska K., Leifer K. et al. Brittle-to-ductile transition in uniaxial compression of silicon pillars at room temperature. Advanced Functional Materials. 2009. Vol. 19, Iss. 15. pp. 2439–2444.
16. Kurilko A. S. Control of physical and mechanical properties of rocks under alternating temperature influence: abstract of diss. for the degree of Doctor of Engineering Sciences. Ekaterinburg, IGD UrO RAS, 2005. 40 p.
17. Bondalet I. S., Radynsky L. A., Odintsov D. M. On the issue of determining the index of the degree of crushing of solid materials. Innovative approaches to solving scientific problems: collection of papers based on the materials of the III International competition of scientific research papers. Ufa: Scientific and Publishing Center «Vestnik Nauki», 2020. pp. 44–51.
18. Bond F. C. The third theory of comminution. Transactions on AIME Mining Engineering. 1952. Vol. 193. pp. 484–494.

Language of full-text русский
Полный текст статьи Получить
Назад